So many config changes from WireGuard (and even more from pfBlocker if DNSBL is disabled)
-
@johnpoz said in So many config changes from WireGuard:
I don't have wireguard installed, I have tailscale installed.
Becoming lazy, don't want to open a port?
-
@Bob-Dig while I have a port open for tailscale - I thought I was reading somewhere recently that someone has tailscale working without opening that port.. tailscale is not my go to vpn solution. I use openvpn for day to day remote access.. Which is way less than it use to be now that just full time work from home ;)
As to the backup/config settings - I don't see anything there that would have an effect on the pfblocker stuff
-
@johnpoz said in So many config changes from WireGuard:
I would love to know how to stop it.
Currently the only way would be to manually edit the PHP code of the pfBlockerNG GUI and add the additional arguments to calls to the
write_config()function that I copied in my earlier post. That would require knowledge of the code paths in the package or some study to figure them out. -
Do you actually have DNS-BL enabled?
Maybe: https://redmine.pfsense.org/issues/14409
I do have DNS-BL enabled and don't see config backups for it.
-
@stephenw10 no I do not actually have dns-bl enabled. I just use pfblocker to create native aliases that I use in my firewall rules.
here is what I am using pfblocker for
-
@johnpoz I use both.
-
@Bob-Dig I wonder if I just enabled dns-bl, without actually using it would get rid of the config entries?
-
@johnpoz said in So many config changes from WireGuard:
@Bob-Dig I wonder if I just enabled dns-bl, without actually using it would get rid of the config entries?
Sounds like a plan.
-
@Bob-Dig yup have it enabled now, just not doing anything.. So check back tmrw to see if those config entries are in there..
-
@johnpoz Do you have anything in DNSBL Groups enabled or the other tabs?
Still wouldn't make any sense. -
@Bob-Dig nope have never setup dns-bl, have no use for it. Have never had it enabled ever..
-
@johnpoz I think one ad list is included by installation there, maybe removing it does something; or not.
-
@Bob-Dig I looked I have nothing selected.. Ah, this is set by default for top 1M whitelist
Default: COM, NET, ORG, CA, CO, IO
But can not unselect them.. if you do and then hit save, and then go back into it.. They are selected again, but this is not even enabled.
I have no groups listed
No categories selected, nothing in safesearch, its not enabled.. I don't use dns-bl, my clients use pihole on my network for this sort of thing.. The only thing I use pfblocker for is creating aliases I use in my own firewall rules.
-
@johnpoz I am quite happy with pfBlocker doing DNSBL, what am I missing? Seriously.
-
@Bob-Dig I have nothing against it, it prob works great.. But have been using pihole for like forever.. It works for me, its eyecandy is nicer and I know it inside and out.. I have no good reason to change..
But I do love the flexibility of creating aliases with pfblocker, and make use of them quite a bit.. But the blocking with dnsbl I don't have a current use for..
If I want filtered dns, I query my pihole, which in turn forwards to unbound on pfsense. If I want unfiltered I can just query unbound on pfsense directly.. I see no point in filtering in 2 different locations. Maybe I could move to just using pfblocker dnsbl - but then I would miss the eyecandy pihole provides. And would be more difficult to just query a filtered or unfiltered dns that I run locally, etc.
The alias rules I create in pfblocker, are only for inbound into my wan.. etc..
-
weird, I have the same problem with pfblockerNG.
DNSBL is disabled, using it in the same way as @johnpoz , just the IP part to create aliases.
-
@mcury yeah its a bit of annoyance... Lets see if enabling it and just not having anything configured makes it go away.. But to be honest I don't think that is going to work.. But happy to test it.. Will know tmrw.. since the cron kicks off every 12 hours.
Maybe we are the only 2 using pfblocker in this way? ;)
Yours is doing it every hour, which pretty much makes the ability to restore configs completely useless, since by time you might notice and need to restore a config you did yesterday it would be gone.. The default is like 30, so if every hour a new one is added, 30 hours later your actual config you changed would be gone.
-
@johnpoz said in So many config changes from WireGuard:
@mcury yeah its a bit of annoyance... Lets see if enabling it and just not having anything configured makes it go away.. But to be honest I don't think that is going to work.. But happy to test it.. Will know tmrw.. since the cron kicks off every 12 hours.
If there is something that I can do to help, just tell me.
I can set it up here to speed up the tests@johnpoz said in So many config changes from WireGuard:
Maybe we are the only 2 using pfblocker in this way? ;)
probably :) I'm using uBlock Origin, for me it is working perfectly fine.
dead on arrival, nowhere to be found.
-
@mcury all I did was enable it, but leave everything disabled or not configured.. You could try that since yours is doing it every hour, then in a couple hours we should be able to tell if that fixes the problem. If it does it would be really odd.
-
@johnpoz said in So many config changes from WireGuard:
@mcury all I did was enable it, but leave everything disabled or not configured.. You could try that since yours is doing it every hour, then in a couple hours we should be able to tell if that fixes the problem. If it does it would be really odd.
Enabled DNSBL and ran an update, it is up and running.
I'll be monitoring it and will report soon.DNSBL groups as per below:
dead on arrival, nowhere to be found.
