Delete alias. Currently in use by filter rule id 91

[Unoptanio]

@stephenw10

[stephenw10]

OK there we go. What interface is opt9?

[dennypage]

@Unoptanio Look for opt9 in Status / Interfaces

[Unoptanio]

@dennypage

[dennypage]

@Unoptanio Okay, now you know. The rule is on the interface named "WAN_AMPERSAND". Look at Firewall / Rules / WAN_AMPERSAND and you should be able to find it.

[stephenw10]

It may be disabled? Though if it was I wouldn't expect to see it in Status > Interfaces

[Unoptanio]

@dennypage

yes is disabled

[stephenw10]

The enable it, remove the rule, then disable it again.

[Unoptanio]

@stephenw10

I'll try on Monday because now I'm connected remotely and I'm afraid of going to block.
I'll update you then, thanks

[Unoptanio]

@stephenw10 @dennypage
OK!

I did as you said. It worked well. After re-enabling the interface I managed to eliminate the "cancellare" alias that was in a rule of this interface, thanks