Watchguard Firebox M400/M500
-
@acsaba not sure how I missed your original posts but my Intel(R) Core(TM) i5-4590T generally sits at 50C.. I did replace the fans with a quieter model linked earlier in this thread.. and they're not running anywhere near full speed.
This is also the first I'm seeing about some Intel CPUs not rebooting correctly.. Guess I have to do some rereading because mine seems to have that issue.
-
@chpalmer In the meantime I solved the problem installing arch Linux and controlling the fan speed properly. For the moment I'm not using the WG because of the power consumption and noise, so I will convert back to the original WG firmware.
Anyhow, many thanks for sharing the info.
Keep in touch. -
@stephenw10 Thank you. I will keep looking on eBay - there are a few in the USA, but the shipping cost and exchange rate are a killer. As a home box, the i3 has plenty of power.
-
@chpalmer Yep. It is a doozy of a thread, but there is tonnes (metric of course) of information in here. I never did get the VGA working, but I had a tonne of fun playing with the BIOS writer - never needed to use one before this project.
-
I wonder if the i5-4670K or i5-4670 will work? There are plenty of these available. I can see that the K is only slightly slower and uses more power, but the home box has never seen more than about 40% CPU usage that I have observed.
I have just bought a i5-4670K and a i5-4670 off eBay. I will report back with the reboot test results.
-
The K CPUs were usually the unlocked version preferred by overclockers. So capable of the maximum possible performance. And cost! Of course that also means many have had a hard life.
-
@stephenw10
Avoid the i7-6700
Worked great until it died
At which point I realized the heatsink could not dea -
That definitely wouldn't work in the M400/M500. I assume you tried that in an Mx70?
-
@stephenw10
Sorry, yes.
Mx70
The i7-6700 runs too hot for the Mx70 heatsink and eventually just cooks itself. -
Urgh, best avoid that then!
-
@xxup said in Watchguard Firebox M400/M500:
i5-4670K
I have installed the i5-4670K into the M500 and I can confirm that it reboots from both the console and the GUI. The i5-4670 should be here next week, but I am confident that it will boot okay as it is older than the K version.
***** Edit ***** The K runs about 3-4C hotter than the old i3-4130. I will keep this one in the test lab box and the i5-4670 in the home (production) box.
