pfSense on Watchguard M370
-
@HangmansNoose001380 hi could you send me the bios for m470 with micro codes for v6 processor
-
what version of pfSense are you guys using. When using 2.7.2 TUI It seems to only allow using ZFS? Am I missing something?
I am installing from USB on an M370 using putty. After a successful install using ZFS and rebooting and then booting from ada0 (256GB Kingston mstata) pfSense does not boot.
Any help would be appreciated.
-
You should be able to install either ZFS or UFS.
You need to enable the serial port in the installer or it will use the default ports.
How does it fail? Are you sure it's installing to that drive?
-
Yep - enabled serial ports in the installer, and verified it installed to ada0. I will clear the mstata and try again and report back.
-
@Nerd2600 All set. I needed to expunge the meta data on the mSata.
-
@hangmansnoose001380 Can you DM me the BIOS-File please?
-
@Carnivore-0 Anyone have a copy of the non-passworded bios, it would be gratefully appreciated.
-
@Carnivore-0 the password has been known for some time and can be found here in the thread if you scroll through the posts ;-)
-
PM sent regarding the bios file. I never actually used it myself after the password was found and speedshift support appeared in FreeBSD.
-
@stephenw10 Grateful Sir for the information and thank you for the response.
