Update or Fresh install of 25.07 causes HP ProLiant DL20 Gen9 to Reboot after PFSense Menu
-
Yeah the benefit of snapshot boot environments in ZFS is significant. I usually recommend using ZFS against the drives directly if it's possible these days.
-
Can we assume these boxes still boot fine if you boot in legacy mode?
As far as I know this is a UEFI loader problem.
-
@stephenw10 You know, I am not sure. I will take the CE load I have, kill it, and load it as BIOS instead of UEFI, just UEFI is the default..
-
Well I took and reloaded the DL360 G9 server, and walked through the upgrades. I set it to BIOS mode vs UEFI, and was able to go all the way to 2.8.1 beta and it booted and ran fine. So guessing the assumption this is a UEFI issue is correct.
-
@stephenw10 The million dollar question is, should load modern servers in BIOS or UEFI mode? I assumed now days UEFI was an improvement and the preferred method, but maybe not..
-
I would like to know that too
-
It should work in UEFI mode and everything vaguely modern should be using that. But that confirms it's the same issue we're looking at and not something new.
-
@stephenw10 Sounds like at the moment, if you use an HP server in UEFI mode, don't update to the new release, or it's going to break.
I use a lot of HPE servers, so happy to test any possible fixes if desired. I will not update any more of my HP based PFsense installs til a fix is found..
-
version 25.07.01 does not work on HP systems either. crashes after boot menu
-
https://jumpshare.com/s/wIn5syv1KFQ0VrLvrSdX
-
@WB3FFV I tried to update to 25.07.01, and it once again fails to boot
-
Yup, that looks like the same issue. Try booting legacy to confirm.
-
@stephenw10 I did update a system to the current version having loaded it as BIOS, and it was fine. Are you asking to take a UEFI loaded system, and just changing it from UEFI to BIOS and see what happens?
I didn't think I could just jump from one to the other. For sure this seems to affect all HPE systems that support UEFI..
