Upload traffic not shaped
-
One time i test my outgouing (upload) traffic for shaping and see - this no worked
If incoming traffic beautiful shaped, but outgouing - nothing ???
All out traffic use qwandef
I setp top bandwidth for qwandef - this worked = All interfaces supported ALTQ
But child outgouing queues - deaded
In System logs –> Firewall = all rules and queues working (present name in messages)system pfSense RC1.
What this may be?
-
What version are you on? ALWAYS include this information on any open source bug report.
-
What version are you on? ALWAYS include this information on any open source bug report.
pfSense 1.0 RC1 - this is version?
Full version on HDD (not livecd of embeded)
Platform - usual intel P2-xxx 2 interface
Configuration as filtered bridge+shaper -
update to http://www.pfsense.com/~sullrich/1.0-SNAPSHOT-09-12-06/
RC1 is OLD
-
OK
May be this resolved problem :-\ -
Yes.
-
Not resolved :'(
Any ideas?
This msg from System log->Firewall for send my mail (SMTP=25 port)
pf: 060440 rule 286.qmailDown.2/0(match): pass in on rl0: (tos 0x0, ttl 128, id 34703, offset 0, flags [DF], proto: TCP (6), length: 48) 10.62.0.21.4881 > 213.247.196.18.25: S, cksum 0x0de1 (correct), 2977173570:2977173570(0) win 64512 <mss 1460,nop,nop,sackok="">Rule take outgouing SMTP packet But not place them to queue - work only default queue</mss>
-
Post a screen shot of your traffic shapers rules section that includes the SMTP item.
Make sure you actually told it to prioritize SMTP on the others wizard screen.
-
OK, but only tomorrow.
Thxps in firewall log present only rl0 - Lan interface messages
-
It takes 1 minute total to take a screenshot.
Not sure what my schedule is tomorrow so it would be much better to post a screenshot.
Again, it only takes a mintue.
-
My shape rules
-
Only the default traffic shaper wizard configuration is supported right now.
Please rerun the traffic shaper wizard and test again without modifying anything.
-
Only the default traffic shaper wizard configuration is supported right now.
Please rerun the traffic shaper wizard and test again without modifying anything.
Nothing…
this my "worked" config - shaped only incoming
and ./tmp rulez set
file 2.exe.txt rename to 2.exe and run to unpack (rar archive)pls look this - may be resolve problem
ps wan interface shaped only for default rule - t.e. wan interface support altq
-
-
No offense but I am not running an executable from someone that I do not know.
Please post in a non virus ridden format.
-
No offense but I am not running an executable from someone that I do not know.
Please post in a non virus ridden format.
rules.txt
qlanacks.txt
qlandef.txt
qlanRoot.txt
qmailDown.txt
qmailUp.txt
qOthersDownH.txt
qOthersDownL.txt
qOthersUpH.txt
qOthersUpL.txt
qwanacks.txt
qwandef.txt
qwanRoot.txt
qwebDown.txt
qwebUp.txt -
Bridging interfaces + shaping does not work in 1.0.
-
:-\
Ofiget.
Bridging interface can shape in theory?
Exist any other project where this worked?
I'm in bad situation :-[ -
It can shape in theory but our code does not handle it. We had enough trouble getting to where we are now.
Patches accepted.
-
OK
-
m0n0wall can shape in bridging situations. enable filtering bridge at system>advanced and set up pipes, queues and rules. m0n0's shaper is completely different though but it can shape in a bridgescenario.
-
Bridging interfaces + shaping does not work in 1.0.
I have no Bridging interfaces, but outgoing traffic shaping does not work. RC3.
-
Works fine here.
Did you reset states after running the shaping wizard?
-
Works fine here.
Did you reset states after running the shaping wizard?
Yes. I did it many times :( Queues made by shaper wizard works only - qwandef & qwanacks
-
And you are testing the configuration that the traffc shaping wizard created without modifying anything?
-
And you are testing the configuration that the traffc shaping wizard created without modifying anything?
No, I had modify it. I'l try to begin from the begining.
-
We only support the default configuration has hoba mentioned already.
-
We only support the default configuration has hoba mentioned already.
And in the near future?
-
No idea. The devs are burned out on the shaper currently.
-
I need to restrict outgoing bandwidth for traffic from some tcp ports (2000-2020). Is it possible now in any way?
-
Create a queue for that traffic and assign an upperlimit to edit. Then send the desired traffic to this queue by a trafficshaperrule.
-
Create a queue for that traffic and assign an upperlimit to edit. Then send the desired traffic to this queue by a trafficshaperrule.
It does not work. Only 2 type of queues working: qwandef/qdmzdef & qacks.
-
It's stateful. Reset states after changing rules at diagnostics>states, reset states. If it still does not work your rules/queues are wrong.
-
It's stateful. Reset states after changing rules at diagnostics>states, reset states. If it still does not work your rules/queues are wrong.
Thanks, i know this.
Now everything is all right. New queues started to work, but only after rebooting! May be state reseting does not work properly… -
We fixed a condition with 1.0-RELEASE where under certain circumstances rules were not applied after hitting apply. You should upgrade to the release version.