Has anyone tested 1.21 with a carp cluster?
-
???
-
i get this error when trying to sync to my secondary carp
Aug 6 18:13:01 php: : A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.
Aug 6 18:13:01 php: : New alert found: A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.
Aug 6 18:13:01 php: : Beginning XMLRPC sync to http://10.1.0.2:80.i have both usernames and passwords the same on the two firewalls and i retyped them in the carp interface to make sure there wa snot a typo
SO AS FAR as of this image 1.2.1-RC1
built on Tue Aug 5 04:06:52 EDT 2008CARP DOES NOT WORK
-
:) OK, so i´m not alone with my tests, i can duplicate this, CARP does not work with 1.21, i have tested it again and again, master to backup was not synced.
kernel: carp0: Backup –> Master (preempting a slower master)
kernel: carp0: Master --> Backup (more frequent advertisement received)xmlrpc communication error with username : xxxxx (admin) or anything else - it doesn´t run.
Regards
Heikoi have created a ticket: http://cvstrac.pfsense.com/tktview?tn=1797
-
Are you using 1.2.1 for both master and backup?
-
Yes!
-
Ok, thanks. I'll be checking into this in the next few days when time permits.
-
If i can help, please give me an info….regards heiko
-
Just installed one cluster with 20080810-1447 and everything seems to be ok after 2 hours. I'll give feebback if something goes wrong.
-
after 2 hours? what is that meaning?
-
;D I was meaning that the cluster is runing for 2 hours without any problem.
-
-
then all is runing fine , RPC-XML sync is OK as well as CARP and pfsync.
;) -
I think, i will tested it with the newest snapshot again…
-
Heiko, is the cluster trying to sync through the WAN interface?
-
Yes, the configuration is the same as 1.2 (Wan Carp, lan Carp), but with 1.21 it didn´t run. The same test scenario, but if all people says, it runs, i will test it again..,thanks ermal
-
Please retry with a recent snapshot and see if the problem goes away.
-
im on image
1.2.1-RC1
built on Mon Aug 25 07:40:58 EDT 2008and get this error with carp
php: : New alert found: A communications error occured while attempting XMLRPC sync with username admin https://10.1.0.2:443.
-
Sync doesn't work across https.
-
ok i went over to http and got this
php: : New alert found: A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.
-
Carp works with https in 1.2 as it should, 1.21 have a few bugs, at the moment with ipsec and carp clustering, wait and see…
regards
heiko