Has anyone tested 1.21 with a carp cluster?

heiko · Aug 4, 2008, 8:40 PM

???

UnderCover · Aug 6, 2008, 10:18 PM

i get this error when trying to sync to my secondary carp

Aug 6 18:13:01 php: : A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.
Aug 6 18:13:01 php: : New alert found: A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.
Aug 6 18:13:01 php: : Beginning XMLRPC sync to http://10.1.0.2:80.

i have both usernames and passwords the same on the two firewalls and i retyped them in the carp interface to make sure there wa snot a typo

SO AS FAR as of this image 1.2.1-RC1
built on Tue Aug 5 04:06:52 EDT 2008

CARP DOES NOT WORK

heiko · Aug 7, 2008, 8:20 PM

:) OK, so i´m not alone with my tests, i can duplicate this, CARP does not work with 1.21, i have tested it again and again, master to backup was not synced.

kernel: carp0: Backup –> Master (preempting a slower master)
kernel: carp0: Master --> Backup (more frequent advertisement received)

xmlrpc communication error with username : xxxxx (admin) or anything else - it doesn´t run.

Regards
Heiko

i have created a ticket: http://cvstrac.pfsense.com/tktview?tn=1797

cmb · Aug 9, 2008, 2:32 AM

Are you using 1.2.1 for both master and backup?

heiko · Aug 10, 2008, 8:30 PM

Yes!

cmb · Aug 10, 2008, 9:07 PM

Ok, thanks. I'll be checking into this in the next few days when time permits.

heiko · Aug 10, 2008, 9:09 PM

If i can help, please give me an info….regards heiko

Juve · Aug 11, 2008, 1:13 PM

Just installed one cluster with 20080810-1447 and everything seems to be ok after 2 hours. I'll give feebback if something goes wrong.

heiko · Aug 11, 2008, 1:43 PM

after 2 hours? what is that meaning?

Juve · Aug 11, 2008, 1:45 PM

;D I was meaning that the cluster is runing for 2 hours without any problem.

heiko · Aug 11, 2008, 2:13 PM

@Juve:

;D I was meaning that the cluster is runing for 2 hours without any problem.

upps, and then…

Juve · Aug 11, 2008, 3:15 PM

then all is runing fine , RPC-XML sync is OK as well as CARP and pfsync.
;)

heiko · Aug 11, 2008, 3:21 PM

I think, i will tested it with the newest snapshot again…

eri-- · Aug 11, 2008, 4:39 PM

Heiko, is the cluster trying to sync through the WAN interface?

heiko · Aug 11, 2008, 6:40 PM

Yes, the configuration is the same as 1.2 (Wan Carp, lan Carp), but with 1.21 it didn´t run. The same test scenario, but if all people says, it runs, i will test it again..,thanks ermal

eri-- · Aug 11, 2008, 7:04 PM

Please retry with a recent snapshot and see if the problem goes away.

UnderCover · Aug 25, 2008, 6:59 PM

im on image

1.2.1-RC1
built on Mon Aug 25 07:40:58 EDT 2008

and get this error with carp

php: : New alert found: A communications error occured while attempting XMLRPC sync with username admin https://10.1.0.2:443.

ask · Aug 25, 2008, 7:15 PM

Sync doesn't work across https.

See http://forum.pfsense.org/index.php/topic,11019.0.html

UnderCover · Aug 25, 2008, 7:38 PM

ok i went over to http and got this

php: : New alert found: A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.

heiko · Aug 25, 2008, 7:44 PM

Carp works with https in 1.2 as it should, 1.21 have a few bugs, at the moment with ipsec and carp clustering, wait and see…

regards
heiko