Has anyone tested 1.21 with a carp cluster?

heiko

:) OK, so i´m not alone with my tests, i can duplicate this, CARP does not work with 1.21, i have tested it again and again, master to backup was not synced.

kernel: carp0: Backup –> Master (preempting a slower master)
kernel: carp0: Master --> Backup (more frequent advertisement received)

xmlrpc communication error with username : xxxxx (admin) or anything else - it doesn´t run.

Regards
Heiko

i have created a ticket: http://cvstrac.pfsense.com/tktview?tn=1797

cmb

Are you using 1.2.1 for both master and backup?

heiko

Yes!

cmb

Ok, thanks. I'll be checking into this in the next few days when time permits.

heiko

If i can help, please give me an info….regards heiko

Juve

Just installed one cluster with 20080810-1447 and everything seems to be ok after 2 hours. I'll give feebback if something goes wrong.

heiko

after 2 hours? what is that meaning?

Juve

;D I was meaning that the cluster is runing for 2 hours without any problem.

heiko

@Juve:

;D I was meaning that the cluster is runing for 2 hours without any problem.

upps, and then…

Juve

then all is runing fine , RPC-XML sync is OK as well as CARP and pfsync.
;)

heiko

I think, i will tested it with the newest snapshot again…

eri--

Heiko, is the cluster trying to sync through the WAN interface?

heiko

Yes, the configuration is the same as 1.2 (Wan Carp, lan Carp), but with 1.21 it didn´t run. The same test scenario, but if all people says, it runs, i will test it again..,thanks ermal

eri--

Please retry with a recent snapshot and see if the problem goes away.

UnderCover

im on image

1.2.1-RC1
built on Mon Aug 25 07:40:58 EDT 2008

and get this error with carp

php: : New alert found: A communications error occured while attempting XMLRPC sync with username admin https://10.1.0.2:443.

ask

Sync doesn't work across https.

See http://forum.pfsense.org/index.php/topic,11019.0.html

UnderCover

ok i went over to http and got this

php: : New alert found: A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.

heiko

Carp works with https in 1.2 as it should, 1.21 have a few bugs, at the moment with ipsec and carp clustering, wait and see…

regards
heiko

ask

"UnderCover",

Start a shell (via console or ssh) and try

fetch http://10.1.0.2:80/

If that doesn't work (with the username and password of the system that's trying to sync – remember, they have to be the same on both boxes), then figure out to fix that first.

ask

UnderCover

will do thank you let me know when you need more snapshot carp tests

thanks for your help