How to: Get CPU temp

[RedRep]

Does anyone else have this issue?  Someone mind hosting two 8kb kernel extensions?

[ptt]

You can try from here: http://ptt.4mg.com/pfSense/

[stephenw10]

The problem could be that the kernel modules attached to a post in this thread used the .txt extension.
For some reason this causes a problem when they are downloaded corrupting the file.
If you attach binaries with the .png extension this won't happen.

Steve

[seh2000]

@ptt:

You can try from here: http://ptt.4mg.com/pfSense/

Hi ptt - thanks - but when I try to download fro the link then this:
Forbidden
Host:
You do not have permission to access this page or file
The extension 7z is currently not supported by FreeServers.
If you think there is an error or you wish to have the extension 7z added to the mime definitions, please take the time to notify customer support.
Thank you for using FreeServers.

Steen

[seh2000]

@stephenw10:

The problem could be that the kernel modules attached to a post in this thread used the .txt extension.
For some reason this causes a problem when they are downloaded corrupting the file.
If you attach binaries with the .png extension this won't happen.

Steve

Thanks Steve, where from can I then get the file?
Cheers Steen

[stephenw10]

Here is the coretemp.ko file from FreeBSD 8.1 release (386).
Remove the .png extension. The file should be 8054 bytes.

Steve

coretemp.ko.png

[ptt]

Greatly sorry, changed to zip, now is OK  ( http://ptt.4mg.com/pfSense/ )

You have:

coretemp32.zip–> inside amdtemp.ko & coretemp.ko  ( FreeBSD-8.1-RELEASE-i386 )

coretemp64.zip--> inside amdtemp.ko & coretemp.ko ( FreeBSD-8.1-RELEASE-amd64 )

[seh2000]

@stephenw10:

Here is the coretemp.ko file from FreeBSD 8.1 release (386).
Remove the .png extension. The file should be 8054 bytes.

Steve

Hi Steve!

BINGO!
IT WORKS!
Thanks so much!
Steen

[seh2000]

@ptt:

Greatly sorry, changed to zip, now is OK  ( http://ptt.4mg.com/pfSense/ )

You have:

coretemp32.zip–> inside amdtemp.ko & coretemp.ko

coretemp64.zip--> inside amdtemp.ko & coretemp.ko

Hello ptt!
Many thanks!
As per other post it now works for me!
Steen

[seh2000]

OK, as attached shows dashboard now shows my CPU temp.  ;D  ;)
Thanks to everyone here!
Steen


[RedRep]

@ptt:

Greatly sorry, changed to zip, now is OK  ( http://ptt.4mg.com/pfSense/ )

You have:

coretemp32.zip–> inside amdtemp.ko & coretemp.ko  ( FreeBSD-8.1-RELEASE-i386 )

coretemp64.zip--> inside amdtemp.ko & coretemp.ko ( FreeBSD-8.1-RELEASE-amd64 )

Thank you for hosting them :)

[Micro]

Hi Guys,
I'm still trying to make the coretemp module working but it seems I'm doing something wrong because it still doesn't work  :'(.
I extracted the coretemp.ko from the FreeBSD 8.1 distribution iso and put it to /boot/kernel through a SCP connection authenticated as root.
run the kldload command and tried the command sysctl -a | grep temperature but it returns nothing.

I had no error when typing "kldload coretemp" so it should works !!!

My pfsense box is a Watchguard Firebox X700 hardware which runs on Intel Celeron 1200MHz.
This CPU should be supported by coretemp no ?

Please Help me.

Thanks in advance for your support.

[seh2000]

@Micro:

Hi Guys,
I'm still trying to make the coretemp module working but it seems I'm doing something wrong because it still doesn't work  :'(.
I extracted the coretemp.ko from the FreeBSD 8.1 distribution iso and put it to /boot/kernel through a SCP connection authenticated as root.
run the kldload command and tried the command sysctl -a | grep temperature but it returns nothing.

I had no error when typing "kldload coretemp" so it should works !!!

My pfsense box is a Watchguard Firebox X700 hardware which runs on Intel Celeron 1200MHz.
This CPU should be supported by coretemp no ?

Please Help me.

Thanks in advance for your support.

Try with the core temp file Steve posted here - I used that one and it worked.
Steen

[asterix]

If you are using SCP to transfer the file.. ensure that you transfer the file in binary format. I had similar issue with WinSCP.

[stephenw10]

@Micro:

My pfsense box is a Watchguard Firebox X700 hardware which runs on Intel Celeron 1200MHz.
This CPU should be supported by coretemp no ?

The coretemp driver only supports Intel Core cpus and newer.  ;)

You have to use mbmon for older hardware such as the X700, which is Pentium 3 age.

Steve

[serangku]

Awesome …

I have to try this on my own box

thanks

[seh2000]

@asterix:

If you are using SCP to transfer the file.. ensure that you transfer the file in binary format. I had similar issue with WinSCP.

With the file from Steve I had no issue even when using WinSCP…
Steen

[seh2000]

Anyone had success to get all 4 temperatures to be shown in the dashboard?
That would really be neat.
Also, will an snapshot update break everything?

Steen

[RedRep]

A snapshot would require you to re-edit the function file, other than that it will be fine.

Displaying multiple cores will take a little work.  I've only programmed in Java before and I haven't really had time to sit down and take a look as far as exactly what needs to be added functionality wise.  Right now, the function file returns true/false as far as if you can get temp and the cpu temp itself.  It would need to return the number of cores and the temperatures of each core.

[seh2000]

@RedRep:

A snapshot would require you to re-edit the function file, other than that it will be fine.

Displaying multiple cores will take a little work.  I've only programmed in Java before and I haven't really had time to sit down and take a look as far as exactly what needs to be added functionality wise.  Right now, the function file returns true/false as far as if you can get temp and the cpu temp itself.  It would need to return the number of cores and the temperatures of each core.

Yep, just did the latest snapshot update, so back to the editing board :)
Cheers Steen
Update:
After the snapshot update I had to recopy the coretemp.ko file to /boot/kernel/, then edit the system_information_widget.php file and edit the functions.inc.php file then I was back to "normal".

Cheers Steen