How to: Get CPU temp

seh2000

You can try from here: http://ptt.4mg.com/pfSense/

Hi ptt - thanks - but when I try to download fro the link then this:
Forbidden
Host:
You do not have permission to access this page or file
The extension 7z is currently not supported by FreeServers.
If you think there is an error or you wish to have the extension 7z added to the mime definitions, please take the time to notify customer support.
Thank you for using FreeServers.

Steen

seh2000

@stephenw10:

The problem could be that the kernel modules attached to a post in this thread used the .txt extension.
For some reason this causes a problem when they are downloaded corrupting the file.
If you attach binaries with the .png extension this won't happen.

Steve

Thanks Steve, where from can I then get the file?
Cheers Steen

stephenw10

Here is the coretemp.ko file from FreeBSD 8.1 release (386).
Remove the .png extension. The file should be 8054 bytes.

Steve

coretemp.ko.png

ptt

Greatly sorry, changed to zip, now is OK ( http://ptt.4mg.com/pfSense/ )

You have:

coretemp32.zip–> inside amdtemp.ko & coretemp.ko ( FreeBSD-8.1-RELEASE-i386 )

coretemp64.zip--> inside amdtemp.ko & coretemp.ko ( FreeBSD-8.1-RELEASE-amd64 )

seh2000

@stephenw10:

Here is the coretemp.ko file from FreeBSD 8.1 release (386).
Remove the .png extension. The file should be 8054 bytes.

Steve

Hi Steve!

BINGO!
IT WORKS!
Thanks so much!
Steen

seh2000

@ptt:

Greatly sorry, changed to zip, now is OK ( http://ptt.4mg.com/pfSense/ )

You have:

coretemp32.zip–> inside amdtemp.ko & coretemp.ko

coretemp64.zip--> inside amdtemp.ko & coretemp.ko

Hello ptt!
Many thanks!
As per other post it now works for me!
Steen

seh2000

OK, as attached shows dashboard now shows my CPU temp. ;D ;)
Thanks to everyone here!
Steen

![Screenshot pfSense Dashboard w Temp.jpg](/public/imported_attachments/1/Screenshot pfSense Dashboard w Temp.jpg)
![Screenshot pfSense Dashboard w Temp.jpg_thumb](/public/imported_attachments/1/Screenshot pfSense Dashboard w Temp.jpg_thumb)

RedRep

@ptt:

Greatly sorry, changed to zip, now is OK ( http://ptt.4mg.com/pfSense/ )

You have:

coretemp32.zip–> inside amdtemp.ko & coretemp.ko ( FreeBSD-8.1-RELEASE-i386 )

coretemp64.zip--> inside amdtemp.ko & coretemp.ko ( FreeBSD-8.1-RELEASE-amd64 )

Thank you for hosting them :)

Micro

Hi Guys,
I'm still trying to make the coretemp module working but it seems I'm doing something wrong because it still doesn't work :'(.
I extracted the coretemp.ko from the FreeBSD 8.1 distribution iso and put it to /boot/kernel through a SCP connection authenticated as root.
run the kldload command and tried the command sysctl -a | grep temperature but it returns nothing.

I had no error when typing "kldload coretemp" so it should works !!!

My pfsense box is a Watchguard Firebox X700 hardware which runs on Intel Celeron 1200MHz.
This CPU should be supported by coretemp no ?

Please Help me.

Thanks in advance for your support.

seh2000

@Micro:

Hi Guys,
I'm still trying to make the coretemp module working but it seems I'm doing something wrong because it still doesn't work :'(.
I extracted the coretemp.ko from the FreeBSD 8.1 distribution iso and put it to /boot/kernel through a SCP connection authenticated as root.
run the kldload command and tried the command sysctl -a | grep temperature but it returns nothing.

I had no error when typing "kldload coretemp" so it should works !!!

My pfsense box is a Watchguard Firebox X700 hardware which runs on Intel Celeron 1200MHz.
This CPU should be supported by coretemp no ?

Please Help me.

Thanks in advance for your support.

Try with the core temp file Steve posted here - I used that one and it worked.
Steen

asterix

If you are using SCP to transfer the file.. ensure that you transfer the file in binary format. I had similar issue with WinSCP.

stephenw10

@Micro:

My pfsense box is a Watchguard Firebox X700 hardware which runs on Intel Celeron 1200MHz.
This CPU should be supported by coretemp no ?

The coretemp driver only supports Intel Core cpus and newer. ;)

You have to use mbmon for older hardware such as the X700, which is Pentium 3 age.

Steve

serangku

Awesome …

I have to try this on my own box

thanks

seh2000

@asterix:

If you are using SCP to transfer the file.. ensure that you transfer the file in binary format. I had similar issue with WinSCP.

With the file from Steve I had no issue even when using WinSCP…
Steen

seh2000

Anyone had success to get all 4 temperatures to be shown in the dashboard?
That would really be neat.
Also, will an snapshot update break everything?

Steen

RedRep

A snapshot would require you to re-edit the function file, other than that it will be fine.

Displaying multiple cores will take a little work. I've only programmed in Java before and I haven't really had time to sit down and take a look as far as exactly what needs to be added functionality wise. Right now, the function file returns true/false as far as if you can get temp and the cpu temp itself. It would need to return the number of cores and the temperatures of each core.

seh2000

@RedRep:

A snapshot would require you to re-edit the function file, other than that it will be fine.

Displaying multiple cores will take a little work. I've only programmed in Java before and I haven't really had time to sit down and take a look as far as exactly what needs to be added functionality wise. Right now, the function file returns true/false as far as if you can get temp and the cpu temp itself. It would need to return the number of cores and the temperatures of each core.

Yep, just did the latest snapshot update, so back to the editing board :)
Cheers Steen
Update:
After the snapshot update I had to recopy the coretemp.ko file to /boot/kernel/, then edit the system_information_widget.php file and edit the functions.inc.php file then I was back to "normal".

Cheers Steen

Micro

@stephenw10:

@Micro:

My pfsense box is a Watchguard Firebox X700 hardware which runs on Intel Celeron 1200MHz.
This CPU should be supported by coretemp no ?

The coretemp driver only supports Intel Core cpus and newer. ;)

You have to use mbmon for only hardware such as the X700, which is Pentium 3 age.

Steve

Thanks for the info Steve !!!

Now I have installed the mbmon package and I'm able to get system informations like FAN RPM, CPU and chipset temp from shell.
I've modified the Get_Temp function code in the system_information.widget.php as follow :


function get_temp() {
$temp_out = "";
exec("mbmon -c1 | /usr/bin/awk '{ print $2 }' | /usr/bin/cut -d ',' -f 1", $dfout);
$temp_out = trim($dfout[0]);

return $temp_out;

```}

This works fine in the shell.

I created the file /boot/loader.conf.local with "coretemp_load="yes"" inside (even if I'm not really sure that in my case it will be useful).

At this time, the "system information" widget in the dashboard of pfsense doesn't show the cpu temp.
Is there anything else to do when using mbmon instead of coretemp to make temperature info working ?

Thanks for your support.

Micro.

stephenw10

I phrased that badly.
I've only ever used mbmon from the command line.
It would be nice to have it work with the GUI though.

Steve

Micro

Oups,
I mean I modified the code in the function.inc.php file, not in system_information.widget.php

Micro.