Limiter error

xanaro

it seems the Tue Oct 9 01:55:21 EDT 2012 snapshot has limiter working fine but just deleting a limiter gives the below error but the snaps after that date have limiter broken
Fatal error: Call to undefined method dnpipe_class::GetName() in /usr/local/www/firewall_shaper_vinterface.php on line 101 

I do not see an Oct 9 snapshot, with a time stamp of 01:55:21 listed, it only goes back as far as 02:21, so it seems only X number of revisions are stored on http://snapshots.pfsense.org

Is there any other mirror I can use to download an older snapshot iso?

I need to use the 2.1 Snapshot because it resolves a state clearing issue with my asterisk VOIP pc: http://forum.pfsense.org/index.php/topic,43112.msg289336.html#msg289336

We have 5 users on our home network and 4 of them like to use netflix and youtube, sometimes concurrently. and our residential connection is only 10 Mbit, when they are doing this the lag gets pretty bad. I was using the limiter to limit traffic on port 80 to 7Mbit, which pretty much solved all our issues.

So if anyone knows where I can download an older snapshot please let me know, or if you could please upload the "Tue Oct 9 01:55:21 EDT 2012 snapshot" or an older one, anywhere like rapidshare or whatever, if you still have the iso file on your computer.

I would greatly appreciate it.

Thank you so much :)

xbipin

try the next snap currently being built, should be ready in an hour or 2, should solve limiter error to some extent, bear in mind, u will need to assign some schedule to each limiter for it to work as of now until the remaining bugs r fixed

xanaro

Thanks for the reply, I updated, now I am on:

2.1-BETA0 (i386)
built on Thu Oct 18 09:03:11 EDT 2012
FreeBSD 8.3-RELEASE-p4

The place where there used to be a field to enter an amount of bandwidth, the only thing there now is a "+" button and when you hover over it, the tooltip shows "add another schedule" clicking this button does nothing, as if the button is not working.

before trying to click the button I created a schedule under firewall -> schedules and just selected the rest of the days for october with a time of 00:00-23:59 and saved it.

xbipin

yes its a known issue, the developers should fix it once they figure it out

phil.davis

It is still not possible to enter a new limiter, because the Bandwidth "+" button does not make a new empty row.
Is anyone who knows about the limiter code able to look at and fix this?

limiter.png_thumb

jimp

Ermal should be back from EuroBSDCon in a day or two, once he's back he can get it fixed up.

bardelot

The JavaScript was missing. I made a patch that adds it. (https://github.com/bsdperimeter/pfsense/pull/241)
You can also manually apply the patch and report if everything is working afterwards.

jimp

Merged it in.

eri--

Next snapshots should have limiters back and working with and without schedules.

phil.davis

2.1-BETA0 (i386)
built on Tue Oct 23 20:55:01 EDT 2012
I can add new limiters, with and without schedules, put them in rules, apply them and they work.
No PHP errors, no errors in the system log.
Looks good - for those who need limiters and are waiting to update, this snapshot seems like a good thing.
Thanks Ermal.

xbipin

i can also confirm the same, its working fine, need to check schedules overlap situation

eri--

The first in line wins, that is the behaviour.

xbipin

one problme i noticed that when a schedule expires the config file ends up like this and that client looses complete internet access


pipe 5 config

isnt it better to skip the whole line only so his connectivity doesnt break

xbipin

also noticed with 6th nov snap that if u have a limiter and schedule set to none then it results in this config and doesnt limit anything

pipe 5 config  bw 120Kb bw 0

eri--

Should be fixed on next snapshot.

Thank you for reporting it.

xbipin

@ermal:

Should be fixed on next snapshot.

Thank you for reporting it.

tried the snap after the patch but still same, config shows as below and limiter doesnt limit with schedule set as none

pipe 5 config  bw 120Kb bw 0

pipe 6 config  bw 400Kb bw 0

eri--

You really should have a strange config.xml there.
I pushed another tuning to the code so test that out.

bardelot

@ermal: There is no '$found = true;' before breaking out of the foreach loop, leading to the additional 'bw 0'.

xbipin

config seems all fine

	 <dnshaper><queue><name>ashishup</name>
			<number>5</number>
			 <qlimit><plr><description><bandwidth><bw>120</bw>
					<bwscale>Kb</bwscale>
					<bwsched>none</bwsched></bandwidth> 
			<bandwidthtype>Kb</bandwidthtype>
			<enabled>on</enabled>
			 <buckets><mask>none</mask>
			<delay>0</delay></buckets></description></plr></qlimit></queue> 
		 <queue><name>ashishdown</name>
			<number>6</number>
			 <qlimit><plr><description><bandwidth><bw>400</bw>
					<bwscale>Kb</bwscale>
					<bwsched>none</bwsched></bandwidth> 
			<bandwidthtype>Kb</bandwidthtype>
			<enabled>on</enabled>
			 <buckets><mask>none</mask>
			<delay>0</delay></buckets></description></plr></qlimit></queue></dnshaper>

xbipin

even after the latest patch, the situation is same