New to PFsense - Transparency mode
-
You can do that using Layer7 filtering. http://doc.pfsense.org/index.php/Traffic_Shaping_Guide#Layer_7. Or you can block whatever ports the torrent client is using however most clients will attempt to work around that. It's very difficult to block torrent traffic completely as the client software is designed deliberately to get around it. You can block most torrent traffic using these methods though.
If you are wanting to create a very restricted environment for users you should start from the other end. Block everything and then only allow what you want.Steve
-
Sir,
How about skype? How to block it?
-
Sir,
I have a attached a network diagram. Is this possible?
Thank you
 -
There are many threads about blocking Skype. E.g. with Snort: http://forum.pfsense.org/index.php/topic,53584.0.html
You can build your network as in the diagram but why do you have two pfSense boxes?
Steve
-
Sir,
In order one can use as transparency mode and the other for non transparency mode.
Is this possible? Is there be a problem for this setup?
-
The non-trasparent pfSense box must have a different subnet on each side. E.g. 192.168.0.* on the WAN side and 192.168.100.* on the LAN side. However I still don't see why you need two boxes. :-\
Steve
-
Sir,
The diagram what I present to you is not a good practice?
I want to use the pfsense for the purpose to serve as a internet or the pfsense is the giving an internet connection to the user and in the same time I can block the website the are using like the social media(facebook, tweeter and etc)., instant messenger, torrent and etc. for the users and I want also to control whose user will I block or gave a full access for the website or url.
Below are my concern:
-> documentation or manual for setting up pfsense
-> if I already finished set-up the box how can I block the https://www.facebook.com and https://www.twitter.com?
-> setting up port forwarding. is it the same in configuring in link-sys router?
-> Is the i7 processor with 8gb ram will enough for the around 60 users?Sorry for these questions. I'm just new to pfsense and I just want to know everything before I deploy to our office network.
Thank you in advance for your response.
Precious
-
There is no need to have two pfSense boxes. Run a single box in non-transparent mode (the default) and run the web proxy, Squid, on it. Squid will run as a transparent proxy.
Port forwarding is the similar to any soho router like the Linksys.
If your modem can run in bridge mode such that the pfSense WAN address is you real public IP that makes things a lot easier.
An i7 with 8GB or RAM is almost certainly more power than your need. What is your WAN connection speed?
Steve
-
Sir,
Please correct me if i'm wrong in my understanding. I run a single box pfsense and install the squid package and run it on transparency mode? I'm I correct in my understanding?
I can make my modem run in bridge mode and I will configure the pfsense box wan the public ipaddress of wan or internet
My wan speed is upto 5mbps the minimum is 1mbps.
Precious
-
Yes you're correct.
Almost any new hardware will be fine for a 5Mbps connection regardless of how many people you have behind it (within reason!). An i7 with 8GB is far far far more powerful than you need. Something like an Atom D2500 and 2-4GB will easily suffice. :)Steve
-
Sir,
Thanks for the response.
How about NIC? Is there a recommended specification of NIC to run the pfsense smoothly?
Precious
-
Always choose Intel NICs where possible. Broadcom NICs are considered 2nd best. Do not get very new hardware as it may not be supported, the Intel i210 is not for example.
Steve
-
Sir,
Is configuring pfsense is it like configuring a soho router like linksys and d-link? but it only has more functionality?
-
In many ways it is very similar. However as you say because it has far more capability than most SOHO routers it must be more complex. Getting up and running is relatively easy and as long as you don't try to do everything at once adding extra features is not difficult. Just read up on it first.
Steve
-
Sir,
Thanks for the response.
I'm sorry also if I have so many question regarding the pfsense. I just want to make I will know very before I configure it and use it.
Do you know a website that can help to get started in pfsense? Or any documentation or video to follow? Basically I want to pfsense serve as a server for the internet that can block a websites.
Precious
-
No problem. :)
To do that you should install pfSense as your network router.
Install the Squid web proxy package and get that working.
Install either the Squidguard or Dansguardian package to filter web content.By far the best source of pfSense information is the official book. A new book is due out shortly that will cover 2.0.x and 2.1 in more detail.
There is a lot of pages in the docs wiki that cover installation and Squid etc.
There's a lot of good step-by-step guiges at this site: http://pfsensesetup.com/ I don't believe that is related in any way to the dev team or any official source. Seems mostly correct though. :)Steve
-
Sir,
I'm confuse with the squid web proxy and squidguard? Is it 2 different package to install?
-
Sir,
Just to add to my previous post.
What is the difference of the squid web proxy and squidguard? What is the purpose of each?
What is the title of the book and the author?
-
Squid is a web proxy server: http://www.squid-cache.org
Squidguard is an addon for Squid to allow URL filtering: http://www.squidguard.org
Dansguardian is an alternative to Squidguard that has more flexibility and options: http://dansguardian.orgThe book is called 'pfSense: The Definitive Guide' it's written by the project developers and is available from Amazon: http://www.amazon.com/gp/product/0979034280?ie=UTF8&tag=pfsense-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=0979034280
Steve
-
Sir,
Should I install the squid and squidguard? Which better to use between the squidguard and dansguardian?
