New Alix board for 2013
-
Would it really kill them to use an intel nic like an i350-am4? (quad port)
-
It would probably double the price, maybe more! ;)
Steve
-
It would probably double the price, maybe more! ;)
Steve
They could always go low end and run i210's.
-
Q2 2013 is finished, so I asked for an update:
Board is still in debug, and the cooling solution also needs more work. Please be patient.
Best regards,
Pascal DornierSo there is no timeframe for production yet. But good to know Pascal of PC Engines doesn't release dodgy hardware. When it is ready it should work reliably.
-
Has manufacturing started yet?
I just ordered 10 units of 2d13 and wish I knew this was coming…. -
THX for keeping us up2date phil…
Greetz
Mircsicz -
I wouldn't make any plans on this prior to CY2014.
Pascal could surprise us all, but the reality is that it's July, and the board is still in bring-up.
-
here is the new alix
-
Looks interesting.
USB connected SD for boot media is a little disappointing but perhaps not a problem. I await some throughput figures. :)Steve
-
main thing is msata disk connector, once u use that sd card is not important
-
So excited to get one, can I ask how to get a customer sample? :)
-
email Pascal Dornier directly, hes the person who created this beast
-
Thanks, where can I get Pascal Dornier's mail address? :o
-
I really don't think that hundreds of emails asking for samples is going to help get this out any quicker. ;)
Steve
-
yes, this is just the dream solution board, so hungry to get one :P
-
just contact them through the website, i think the email id is also listed there
-
What a cute MB !
How many users it can serve?
-
Does anyone know the price?
-
it should be in the $125 to $150 range
-
Looks like it fits into the old enclosures (the alix.2 ones).
-
I think that's a little bit steep. Maybe same price to replace old board would be a better choice. If units are installed on clients site and used for minor traffic then old units do just fine.
If plan is to not sell many of this (which I don't see why) then yeah higher price would be better. However, it's probably now cheaper to make the newer model than it is to make the older model.
-
If true the ability to fit old enclosures is great. That's going to help system builders and people upgrading significantly. :)
Steve
-
I think that's a little bit steep. Maybe same price to replace old board would be a better choice. If units are installed on clients site and used for minor traffic then old units do just fine.
If plan is to not sell many of this (which I don't see why) then yeah higher price would be better. However, it's probably now cheaper to make the newer model than it is to make the older model.
Um, $125-150 is pretty close to the street price of current Alix boards. And this has GB nics. Right now if you want to get a low power box with gig ports you need to get something like a 6501, which is twice the price. I predict they will sell well. Even if they come in at $175, I'd take one over a 2D13 every time.
-
I also share the opinion (to each his own of course) that a sub 200 price isn't exaggerated, given the GB nics, better cpu, more RAM and possibility to install a HD so a full install should be feasible while remaining low-power (wonder though how all that will fit in the enclosure).
If it lives up to the expectations, I expect they will sell easily as it will be an affordable board in a segment where there is little competition…So eagerly waiting for the release here... ;)
-
Fair enough for a better model and I would pay for it as I know it's still cheaper than other systems but maybe keep a simpler version still in the market - or even lower the price of the older models 8) - I would order many. It's just that an office of 3-5 people don't need anything better.
Some questions:
1- Would SD Cards be a better option in terms of stability or performance? or is it about price advantage?
2- The MILLION DOLLAR question: Is this still in development or should we expect this month? :P -
2- The MILLION DOLLAR question: Is this still in development or should we expect this month? :P
The web page states:
Status: Prototypes alive and well. Pilot run / customer samples planned for fall 2013. Production expected for early 2014.
-
Things arrive quicker when you don't wait for them.
-
Googling "Realtek RTL8111E" doesn't give me any warm fuzzy feelings. I wish they went with something else. A chain is only as strong as it's weakest link. I don't mind if some of my workstations have Realtek NIC's, but I want my router/firewall to have the best.
-
You still have the two miniPCIe slots.
There you can put something like: http://www.spectra.ch/produkte/130224/web/spectra/Datasheet-MEC-ETH-101.pdf -
Hmm, about warm fuzzy feelings. What does that actually translate to in relation to network interfaces?
edit: Please no "intel" answer. I am interested in nasty technical details.
-
The newer Realtek NICs aren't all that bad. Mostly their throughput isn't quite as advertised and they require more CPU cycles to push packets.
Steve
-
I think that's a little bit steep. Maybe same price to replace old board would be a better choice. If units are installed on clients site and used for minor traffic then old units do just fine.
If plan is to not sell many of this (which I don't see why) then yeah higher price would be better. However, it's probably now cheaper to make the newer model than it is to make the older model.
Um, $125-150 is pretty close to the street price of current Alix boards. And this has GB nics. Right now if you want to get a low power box with gig ports you need to get something like a 6501, which is twice the price. I predict they will sell well. Even if they come in at $175, I'd take one over a 2D13 every time.
At the ~175$ range, in Canada, you can grab a Giada N70E-DR with a Celeron 1037U with 2 82574s in a mini-itx format.. With ram, it'll cost a touch more but still, IVB vs bobcat/atom and it'd crush a 6501 into little bits for less cost.
After seeing the specs, I'm not really a big fan, but their component placement seems pretty great but it'll live or die depending on heatsinking performance to the case.
However, the "Roadmap: We will upgrade to the newer AMD Kabini / Jaguar core based SOCs, up to 2 GHz quad core (Opteron X1150), up to 4 GB ECC DRAM" is dangling a carrot in front of me and would probably be closer to my dream alix. Hoping they avoid Realtek, but not counting on it..
-
Hi!
At the EuroBSDcon in Malta we had a paper with the specifications of the new alix platform!http://i.imgur.com/712EXOx.jpg
-
hi, will pfsene 2.1 support these APU/chipsets ?????
-
http://en.wikipedia.org/wiki/AMD_Accelerated_Processing_Unit
Since it‘s x86: yes -
can i install pfsense 64 bit here? and FreeBSD 9.2?
-
The Bobcat core CPU is 64bit capable and I see no reason why you couldn't install FreeBSD 9.2 if you wanted to. It wouldn't be pfSense though.
Perhaps you've asked the wrong question here? ;)Steve
-
Looks like it fits into the old enclosures (the alix.2 ones).
This now seems unlikely, at least without some modification, since they are relying on the enclosure to cool the CPU. Existing enclosures will not have the appropriate accurately positioned conduction surfaces.
Steve
-
Steve, couldn't this be achieved by using conductive rubber pads?
I have seen this done in other cases to accommodate differing boards.
Of course it may truly need a new case, possibly for profit margin reasons :) - time will tell
-
Possibly. Most of the old cases are steel, as far as I know, which isn't the greatest conductor of heat. However the CPU doesn't require much cooling anyway. I have never been a fan of those conductive sticky pads, all those laptops with overheating GPUs used them for starters.
I'm sure it will all become clear. :)Steve