Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    TippingPoint X506 Hardware

    Scheduled Pinned Locked Moved Hardware
    29 Posts 3 Posters 6.3k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S Offline
      Sifter
      last edited by

      @stephenw10:

      Hmm, OK.
      What baud rate do you see the locked BIOS at?

      Steve

      I can see the TippingPoint OS prompt and bios password prompt at 115200.  When the microdrive is in, I have to close putty and reopen it at 9600 in order to see the full boot.

      1 Reply Last reply Reply Quote 0
      • stephenw10S Offline
        stephenw10 Netgate Administrator
        last edited by

        Sometimes if you're running at 115200 the bootloader sees that as some random input when it gets to the F1 prompt and then waits for you to press return which you can't because your not actually connected.
        Try booting the CF card with putty at 9600 the whole time.
        Also if you've just changed the boot media you sometimes have to boot twice as the first boot halts with a message about hardware change. Only the case with some BIOSes and I wouldn't expect it on something designed for embedded but still…

        Steve

        1 Reply Last reply Reply Quote 0
        • S Offline
          Sifter
          last edited by

          Interesting, it doesnt like my Transcend Compact Flash ULTRA 4GB Industrial.

          As soon as I imaged my microdrive with the pfSense-2.1-RELEASE-512mb-i386-nanobsd.img.gz image and popped it in, it booted right away.

          Here is a snippet from assigning vlan interfaces.

               ___
           ___/ f \
          / p \___/ Sense
          \___/   \
              \___/
          
          Welcome to pfSense 2.1-RELEASE  ...
          
          Creating symlinks......done.
          External config loader 1.0 is now starting... ad0s3
          Launching the init system... done.
          Initializing............................. done.
          Starting device manager (devd)...done.
          Loading configuration......done.
          
          Default interfaces not found -- Running interface assignment option.
          sis0: link state changed to DOWN
          
          Valid interfaces are:
          
          sis0  ff:ff:ff:ff:ff:ff   (up) NatSemi DP8381[56] 10/100BaseTX
          
          Do you want to set up VLANs first?
          
          If you are not going to use VLANs, or only for optional interfaces, you should
          say no here and use the webConfigurator to configure VLANs later, if required.
          
          Do you want to set up VLANs now [y|n]? y
          
          VLAN Capable interfaces:
          
          sis0    ff:ff:ff:ff:ff:ff   (up)
          
          Enter the parent interface name for the new VLAN (or nothing if finished): sis0
          Enter the VLAN tag (1-4094): 100
          
          VLAN Capable interfaces:
          
          sis0    ff:ff:ff:ff:ff:ff   (up)
          
          Enter the parent interface name for the new VLAN (or nothing if finished): sis0
          Enter the VLAN tag (1-4094): 200
          
          VLAN Capable interfaces:
          
          sis0    ff:ff:ff:ff:ff:ff   (up)
          
          Enter the parent interface name for the new VLAN (or nothing if finished): sis0
          Enter the VLAN tag (1-4094): 300
          
          VLAN Capable interfaces:
          
          sis0    ff:ff:ff:ff:ff:ff   (up)
          
          Enter the parent interface name for the new VLAN (or nothing if finished):
          
          VLAN interfaces:
          
          sis0_vlan100    VLAN tag 100, parent interface sis0
          sis0_vlan200    VLAN tag 200, parent interface sis0
          sis0_vlan300    VLAN tag 300, parent interface sis0
          
          *NOTE*  pfSense requires *AT LEAST* 1 assigned interface(s) to function.
                  If you do not have *AT LEAST* 1 interfaces you CANNOT continue.
          
                  If you do not have at least 1 *REAL* network interface card(s)
                  or one interface with multiple VLANs then pfSense
                  *WILL NOT* function correctly.
          
          If you do not know the names of your interfaces, you may choose to use
          auto-detection. In that case, disconnect all interfaces now before
          hitting 'a' to initiate auto detection.
          
          Enter the WAN interface name or 'a' for auto-detection: sis0_vlan100
          
          Enter the LAN interface name or 'a' for auto-detection
          NOTE: this enables full Firewalling/NAT mode.
          (or nothing if finished): sis0_vlan200
          
          Enter the Optional 1 interface name or 'a' for auto-detection
          (or nothing if finished): sis0_vlan300
          
          Enter the Optional 2 interface name or 'a' for auto-detection
          (or nothing if finished):
          
          The interfaces will be assigned as follows:
          
          WAN  -> sis0_vlan100
          LAN  -> sis0_vlan200
          OPT1 -> sis0_vlan300
          
          Do you want to proceed [y|n]?y
          
          Writing configuration...done.
          Updating configuration...done.
          Cleaning backup cache...done.
          Setting up extended sysctls...done.
          Setting timezone...done.
          Configuring loopback interface...done.
          vlan0: changing name to 'sis0_vlan100'
          
          Starting Securevlan1: changing name to 'sis0_vlan200'
           Shell Services.vlan2: changing name to 'sis0_vlan300'
          ..done.
          Setting up polling defaults...done.
          Setting up interfaces microcode...done.
          Configuring loopback interface...done.
          Creating wireless clone interfaces...done.
          Configuring LAGG interfaces...done.
          Configuring VLAN interfaces...done.
          Configuring QinQ interfaces...done.
          Configuring WAN interface...Generating new MAC address.done.
          Configuring LAN interface...done.
          Syncing OpenVPN settings...done.
          Configuring firewall......done.
          Starting PFLOG...done.
          Setting up gateway monitors...done.
          Synchronizing user settings...done.
          Starting webConfigurator...done.
          Configuring CRON...done.
          Starting DNS forwarder...done.
          Starting NTP time client...done.
          Starting DHCP service...done.
          Starting DHCPv6 service...done.
          Configuring firewall......done.
          Generating RRD graphs...done.
          Starting syslog...done.
          Starting CRON... done.
          Bootup complete
          
          FreeBSD/i386 (pfSense.localdomain) (console)
          
          *** Welcome to pfSense 2.1-RELEASE-nanobsd (i386) on pfSense ***
          
           WAN (wan)       -> sis0_vlan100 ->
           LAN (lan)       -> sis0_vlan200 -> v4: 192.168.1.1/24
           OPT1 (opt1)     -> sis0_vlan300 ->
          
           0) Logout (SSH only)                  8) Shell
           1) Assign Interfaces                  9) pfTop
           2) Set interface(s) IP address       10) Filter Logs
           3) Reset webConfigurator password    11) Restart webConfigurator
           4) Reset to factory defaults         12) pfSense Developer Shell
           5) Reboot system                     13) Upgrade from console
           6) Halt system                       14) Disable Secure Shell (sshd)
           7) Ping host                         15) Restore recent configuration
          
          Enter an option:
          
          
          1 Reply Last reply Reply Quote 0
          • S Offline
            Sifter
            last edited by

            @stephenw10:

            Can you try setting up the NICs with the microdrive?
            First you need to find out if you can actually get any networkaccess at all. I aimagine it might be VLANs to whatever the chip under the heatsink is but they may require setting up via some out of band service like i2c which would be bad.

            Steve

            So even after assigning vlan's 100, 200, and 300 to the sis0 interface, no interfaces come alive when I plug in a CAT5 cable to each of the 6 jacks.

            1 Reply Last reply Reply Quote 0
            • S Offline
              Sifter
              last edited by

              And here is our mystery chip under the heatsink.

              1 Reply Last reply Reply Quote 0
              • stephenw10S Offline
                stephenw10 Netgate Administrator
                last edited by

                Ok so as suspected a switch IC. These are normally configured via spi in soho routers but usually (often) that's only neccessary if you need to change the default config.
                You can't just assign VLANs at random. Assign the sis interface directly. Run a packet capture on it. Whilst it's running send some traffic into external switch ports. Now look at the capture to see what vlans traffic arrived on. Of course you'll have to get the capture file off the box to analyse it, or do it the hard way.  ;)

                Steve

                1 Reply Last reply Reply Quote 0
                • S Offline
                  Sifter
                  last edited by

                  @stephenw10:

                  You can't just assign VLANs at random. Assign the sis interface directly.

                  Steve

                  I need 2 interfaces before pfsense will proceed, do I assign one generic vlan as WAN and then assign the sis0 directly to LAN?  How would you do it?

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S Offline
                    stephenw10 Netgate Administrator
                    last edited by

                    PfSense only requires 1 interface. But yes you could use one real interface and one VLAN interface.
                    The other possibility is that the default config of the switch is no vlans at all, just like an unmanaged switch.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • _Adrian__ Offline
                      _Adrian_
                      last edited by

                      I'm keeping an eye on this thread :)

                      If it ain't broken, fix it till it is :P

                      1 Reply Last reply Reply Quote 0
                      • _Adrian__ Offline
                        _Adrian_
                        last edited by

                        I wonder if this has similar hardware :P
                        http://www.ebay.ca/itm/HP-Tippingpoint-Core-Controller-48-Port-Gigabit-Switch-/321258224413?pt=US_Network_Switches&hash=item4acc7b7b1d

                        If it ain't broken, fix it till it is :P

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S Offline
                          stephenw10 Netgate Administrator
                          last edited by

                          Unlikely. You need some serious power for a 48 port gig switch. You're suggesting it might have an x86 backend? Maybe if it has any firewall or routing features. I doubt it though.

                          Steve

                          1 Reply Last reply Reply Quote 0
                          • _Adrian__ Offline
                            _Adrian_
                            last edited by

                            @stephenw10:

                            You're suggesting it might have an x86 backend?
                            Steve

                            Its a posibility…

                            And that's what I'm after :)

                            If it ain't broken, fix it till it is :P

                            1 Reply Last reply Reply Quote 0
                            • S Offline
                              Sifter
                              last edited by

                              @stephenw10:

                              PfSense only requires 1 interface. But yes you could use one real interface and one VLAN interface.
                              The other possibility is that the default config of the switch is no vlans at all, just like an unmanaged switch.

                              Steve

                              Ive now assigned sis0 as LAN and since it asked for WAN first, I just filled in a random vlan name.  However, nomatter what cable or port I plug into, none of the ports light up.  They dont recognize that a cat5 cable is plugged in.

                              If it doesnt see that a cat5 cable is plugged in, how is a packet capture going to work?  Dont we first have to work through getting sis0 "UP"?

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S Offline
                                stephenw10 Netgate Administrator
                                last edited by

                                Ah, well that makes things a lot more complex. If the default config of the switch is no config at all, everything off, then it needs to be configured before anything will work. Yes you need to see sis0 as UP before anything else.
                                Where are you reading this though, at the console I assume. What do you see from 'ifconfig -a'? If it is vlans only at sis0 then an interface set to use no tags or vlan1 might show as down. What does is show for media and status?

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • S Offline
                                  Sifter
                                  last edited by

                                  Im doing everything from the console at this point.

                                  Enter an option: 1
                                  
                                  Valid interfaces are:
                                  
                                  sis0  02:63:c0:d6:7b:7e   (up) NatSemi DP8381[56] 10/100BaseTX
                                  
                                  Do you want to set up VLANs first?
                                  
                                  If you are not going to use VLANs, or only for optional interfaces, you should
                                  say no here and use the webConfigurator to configure VLANs later, if required.
                                  
                                  Do you want to set up VLANs now [y|n]? y
                                  
                                  WARNING: all existing VLANs will be cleared if you proceed!
                                  
                                  Do you want to proceed [y|n]?y
                                  
                                  VLAN Capable interfaces:
                                  
                                  sis0    02:63:c0:d6:7b:7e   (up)
                                  
                                  Enter the parent interface name for the new VLAN (or nothing if finished): sis0
                                  Enter the VLAN tag (1-4094): 1
                                  
                                  VLAN Capable interfaces:
                                  
                                  sis0    02:63:c0:d6:7b:7e   (up)
                                  
                                  Enter the parent interface name for the new VLAN (or nothing if finished):
                                  
                                  VLAN interfaces:
                                  
                                  sis0_vlan1      VLAN tag 1, parent interface sis0
                                  
                                  *NOTE*  pfSense requires *AT LEAST* 1 assigned interface(s) to function.
                                          If you do not have *AT LEAST* 1 interfaces you CANNOT continue.
                                  
                                          If you do not have at least 1 *REAL* network interface card(s)
                                          or one interface with multiple VLANs then pfSense
                                          *WILL NOT* function correctly.
                                  
                                  If you do not know the names of your interfaces, you may choose to use
                                  auto-detection. In that case, disconnect all interfaces now before
                                  hitting 'a' to initiate auto detection.
                                  
                                  Enter the WAN interface name or 'a' for auto-detection: sis0_vlan1
                                  
                                  Enter the LAN interface name or 'a' for auto-detection
                                  NOTE: this enables full Firewalling/NAT mode.
                                  (or nothing if finished): sis0
                                  
                                  Enter the Optional 1 interface name or 'a' for auto-detection
                                  (or nothing if finished):
                                  
                                  The interfaces will be assigned as follows:
                                  
                                  WAN  -> sis0_vlan1
                                  LAN  -> sis0
                                  
                                  Do you want to proceed [y|n]?y
                                  
                                  Writing configuration...done.
                                  One moment while we reload the settings... done!
                                  *** Welcome to pfSense 2.1-RELEASE-nanobsd (i386) on pfSense ***
                                  
                                   WAN (wan)       -> sis0_vlan1 ->
                                   LAN (lan)       -> sis0       -> v4: 10.0.0.169/24
                                  
                                   0) Logout (SSH only)                  8) Shell
                                   1) Assign Interfaces                  9) pfTop
                                   2) Set interface(s) IP address       10) Filter Logs
                                   3) Reset webConfigurator password    11) Restart webConfigurator
                                   4) Reset to factory defaults         12) pfSense Developer Shell
                                   5) Reboot system                     13) Upgrade from console
                                   6) Halt system                       14) Enable Secure Shell (sshd)
                                   7) Ping host                         15) Restore recent configuration
                                  
                                  Enter an option:
                                  
                                  
                                  [2.1-RELEASE][root@pfSense.localdomain]/root(1): ifconfig -a
                                  sis0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
                                          options=83808 <vlan_mtu,wol_ucast,wol_mcast,wol_magic,linkstate>ether 02:63:c0:d6:7b:7e
                                          inet6 fe80::7422:d7c0:c46:842%sis0 prefixlen 64 scopeid 0x1
                                          inet 10.0.0.169 netmask 0xffffff00 broadcast 10.0.0.255
                                          nd6 options=1 <performnud>media: Ethernet autoselect (none)
                                          status: no carrier
                                  enc0: flags=0<> metric 0 mtu 1536
                                  pfsync0: flags=0<> metric 0 mtu 1460
                                          syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
                                  pflog0: flags=100 <promisc>metric 0 mtu 33192
                                  lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
                                          options=3 <rxcsum,txcsum>inet 127.0.0.1 netmask 0xff000000
                                          inet6 ::1 prefixlen 128
                                          inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
                                          nd6 options=3 <performnud,accept_rtadv>sis0_vlan100: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
                                          ether 02:63:c0:d6:7b:7e
                                          inet6 fe80::7422:d7c0:c46:842%sis0_vlan100 prefixlen 64 scopeid 0x6
                                          nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (none)
                                          status: no carrier
                                          vlan: 100 vlanpcp: 0 parent interface: sis0
                                  sis0_vlan200: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
                                          ether 02:63:c0:d6:7b:7e
                                          inet6 fe80::7422:d7c0:c46:842%sis0_vlan200 prefixlen 64 scopeid 0x7
                                          nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (none)
                                          status: no carrier
                                          vlan: 200 vlanpcp: 0 parent interface: sis0
                                  sis0_vlan300: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
                                          ether 02:63:c0:d6:7b:7e
                                          inet6 fe80::7422:d7c0:c46:842%sis0_vlan300 prefixlen 64 scopeid 0x8
                                          nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (none)
                                          status: no carrier
                                          vlan: 300 vlanpcp: 0 parent interface: sis0
                                  sis0_vlan1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
                                          ether 02:63:c0:d6:7b:7e
                                          inet6 fe80::7422:d7c0:c46:842%sis0_vlan1 prefixlen 64 scopeid 0x9
                                          nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (none)
                                          status: no carrier
                                          vlan: 1 vlanpcp: 0 parent interface: sis0
                                  [2.1-RELEASE][root@pfSense.localdomain]/root(2):</performnud,accept_rtadv></up,broadcast,running,simplex,multicast></performnud,accept_rtadv></up,broadcast,running,simplex,multicast></performnud,accept_rtadv></up,broadcast,running,simplex,multicast></performnud,accept_rtadv></up,broadcast,running,simplex,multicast></performnud,accept_rtadv></rxcsum,txcsum></up,loopback,running,multicast></promisc></performnud></vlan_mtu,wol_ucast,wol_mcast,wol_magic,linkstate></up,broadcast,running,simplex,multicast> 
                                  
                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S Offline
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    @Sifter:

                                    
                                    sis0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
                                            options=83808 <vlan_mtu,wol_ucast,wol_mcast,wol_magic,linkstate>ether 02:63:c0:d6:7b:7e
                                            inet6 fe80::7422:d7c0:c46:842%sis0 prefixlen 64 scopeid 0x1
                                            inet 10.0.0.169 netmask 0xffffff00 broadcast 10.0.0.255
                                            nd6 options=1 <performnud>media: Ethernet autoselect (none)
                                            status: no carrier</performnud></vlan_mtu,wol_ucast,wol_mcast,wol_magic,linkstate></up,broadcast,running,simplex,multicast> 
                                    

                                    Hmm, well that doesn't look good. I would expect that sis0 is always connected to the switch. The switch may have autonegotiation disabled on that port. You could try setting sis0 to 100Mbps FD and see if shows carrier. Though even if auto was disabled it should still fall back to 10Mb HD if a connection is detected.  :-\

                                    You might be able to port (if someone else hasn't done it already some roboswitch code from, for example, OpenWRT.

                                    Steve

                                    1 Reply Last reply Reply Quote 0
                                    • First post
                                      Last post
                                    Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.