pfsense 2.4.4 - em3 interface disapeared after upgrade
-
What shows in the output of
pciconf -lvb? And the contents of/var/log/dmesg.boot. -
pciconf -lvb:
hostb0@pci0:0:0:0: class=0x060000 card=0x0f318086 chip=0x0f008086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register' class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x0f318086 chip=0x0f318086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'Atom Processor Z36xxx/Z37xxx Series Graphics & Display' class = display subclass = VGA bar [10] = type Memory, range 32, base 0xd0000000, size 4194304, enabled bar [18] = type Prefetchable Memory, range 32, base 0xc0000000, size 268435456, enabled bar [20] = type I/O Port, range 32, base 0xf080, size 8, enabled ahci0@pci0:0:19:0: class=0x010601 card=0x0f238086 chip=0x0f238086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'Atom Processor E3800 Series SATA AHCI Controller' class = mass storage subclass = SATA bar [10] = type I/O Port, range 32, base 0xf070, size 8, enabled bar [14] = type I/O Port, range 32, base 0xf060, size 4, enabled bar [18] = type I/O Port, range 32, base 0xf050, size 8, enabled bar [1c] = type I/O Port, range 32, base 0xf040, size 4, enabled bar [20] = type I/O Port, range 32, base 0xf020, size 32, enabled bar [24] = type Memory, range 32, base 0xd0a02000, size 2048, enabled none0@pci0:0:26:0: class=0x108000 card=0x0f188086 chip=0x0f188086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine' class = encrypt/decrypt bar [10] = type Memory, range 32, base 0xd0500000, size 1048576, enabled bar [14] = type Memory, range 32, base 0xd0400000, size 1048576, enabled pcib1@pci0:0:28:0: class=0x060400 card=0x0f488086 chip=0x0f488086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'Atom Processor E3800 Series PCI Express Root Port 1' class = bridge subclass = PCI-PCI pcib2@pci0:0:28:1: class=0x060400 card=0x0f4a8086 chip=0x0f4a8086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'Atom Processor E3800 Series PCI Express Root Port 2' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:2: class=0x060400 card=0x0f4c8086 chip=0x0f4c8086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'Atom Processor E3800 Series PCI Express Root Port 3' class = bridge subclass = PCI-PCI pcib4@pci0:0:28:3: class=0x060400 card=0x0f4e8086 chip=0x0f4e8086 rev=0x0e hdr=0x01 vendor = 'Intel Corporation' device = 'Atom Processor E3800 Series PCI Express Root Port 4' class = bridge subclass = PCI-PCI ehci0@pci0:0:29:0: class=0x0c0320 card=0x0f348086 chip=0x0f348086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'Atom Processor Z36xxx/Z37xxx Series USB EHCI' class = serial bus subclass = USB bar [10] = type Memory, range 32, base 0xd0a01000, size 1024, enabled isab0@pci0:0:31:0: class=0x060100 card=0x0f1c8086 chip=0x0f1c8086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'Atom Processor Z36xxx/Z37xxx Series Power Control Unit' class = bridge subclass = PCI-ISA none1@pci0:0:31:3: class=0x0c0500 card=0x0f128086 chip=0x0f128086 rev=0x0e hdr=0x00 vendor = 'Intel Corporation' device = 'Atom Processor E3800 Series SMBus Controller' class = serial bus subclass = SMBus bar [10] = type Memory, range 32, base 0xd0a00000, size 32, enabled bar [20] = type I/O Port, range 32, base 0xf000, size 32, enabled em0@pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82583V Gigabit Network Connection' class = network subclass = ethernet bar [10] = type Memory, range 32, base 0xd0900000, size 131072, enabled bar [18] = type I/O Port, range 32, base 0xe000, size 32, enabled bar [1c] = type Memory, range 32, base 0xd0920000, size 16384, enabled em1@pci0:2:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82583V Gigabit Network Connection' class = network subclass = ethernet bar [10] = type Memory, range 32, base 0xd0800000, size 131072, enabled bar [18] = type I/O Port, range 32, base 0xd000, size 32, enabled bar [1c] = type Memory, range 32, base 0xd0820000, size 16384, enabled em2@pci0:3:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82583V Gigabit Network Connection' class = network subclass = ethernet bar [10] = type Memory, range 32, base 0xd0700000, size 131072, enabled bar [18] = type I/O Port, range 32, base 0xc000, size 32, enabled bar [1c] = type Memory, range 32, base 0xd0720000, size 16384, enabled none2@pci0:4:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82583V Gigabit Network Connection' class = network subclass = ethernet bar [10] = type Memory, range 32, base 0xd0600000, size 131072, disabled bar [18] = type I/O Port, range 32, base 0xb000, size 32, enabled bar [1c] = type Memory, range 32, base 0xd0620000, size 16384, disabled/var/log/dmesg.boot:
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0a3(RELENG_2_4_4): Thu Sep 20 09:04:45 EDT 2018 root@buildbot3:/crossbuild/ce-244/obj/amd64/WvDslnYb/crossbuild/ce-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) VT(efifb): resolution 1280x1024 info: [drm] Initialized drm 1.1.0 20060810 CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3976835072 (3792 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > WARNING: L1 data cache covers less APIC IDs than a core 0 < 1 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748) ioapic0 <Version 2.0> irqs 0-86 on motherboard SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! Timecounter "TSC" frequency 2000048040 Hz quality 1000 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80680430, 0) error 1 random: entropy device external interface ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806804e0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80680590, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a7460, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a7510, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a75c0, 0) error 1 wlan: mac acl policy registered hn: tranparent VF mode, if_transmit will be used, instead of if_start kbd0 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 cryptosoft0: <software crypto> on motherboard padlock0: No ACE support. acpi0: <ALASKA A M I > on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x10 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 drmn0: <Intel Valleyview (mobile)> on vgapci0 info: [drm] Memory usable by graphics device = 2048M intel_iicbb0 on drmn0 iicbus0: <Philips I2C bus> on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 iicbus1: <Philips I2C bus> on intel_gmbus0 iic1: <I2C generic I/O> on iicbus1 intel_iicbb1 on drmn0 iicbus2: <Philips I2C bus> on iicbb1 addr 0xff iic2: <I2C generic I/O> on iicbus2 iicbus3: <Philips I2C bus> on intel_gmbus1 iic3: <I2C generic I/O> on iicbus3 intel_iicbb2 on drmn0 iicbus4: <Philips I2C bus> on iicbb2 addr 0xff iic4: <I2C generic I/O> on iicbus4 iicbus5: <Philips I2C bus> on intel_gmbus2 iic5: <I2C generic I/O> on iicbus5 intel_iicbb3 on drmn0 iicbus6: <Philips I2C bus> on iicbb3 addr 0xff iic6: <I2C generic I/O> on iicbus6 iicbus7: <Philips I2C bus> on intel_gmbus3 iic7: <I2C generic I/O> on iicbus7 intel_iicbb4 on drmn0 iicbus8: <Philips I2C bus> on iicbb4 addr 0xff iic8: <I2C generic I/O> on iicbus8 iicbus9: <Philips I2C bus> on intel_gmbus4 iic9: <I2C generic I/O> on iicbus9 intel_iicbb5 on drmn0 iicbus10: <Philips I2C bus> on iicbb5 addr 0xff iic10: <I2C generic I/O> on iicbus10 iicbus11: <Philips I2C bus> on intel_gmbus5 iic11: <I2C generic I/O> on iicbus11 info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. error: [drm:pid0:ironlake_wait_panel_status] *ERROR* Panel status timeout: status 21c89105 control abcd4c05 drm_iic_dp_aux0 on drmn0 info: [drm] failed to retrieve link info, disabling eDP drm_iic_dp_aux0: detached intel_sdvo_ddc_proxy397632 on drmn0 intel_sdvo_ddc_proxy397632: detached drm_iic_dp_aux1 on drmn0 drmn0: taking over the fictitious range 0xc0000000-0xd0000000 info: [drm] Connector VGA-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.VGA-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-2 info: [drm] - kern.vt.fb.default_mode info: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 drmn0: warning: HDMI-A-2: EDID block 0 invalid. fbd0 on drmn0 VT: Replacing driver "efifb" with new "fb". drmn0: More than 8 outputs detected info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a02000-0xd0a027ff irq 19 at device 19.0 on pci0 ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1 em0: Using an MSI interrupt em0: Ethernet address: 00:71:21:aa:43:a4 em0: netmap queues/slots: TX 1/1024, RX 1/1024 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pcib2: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib2 em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2 em1: Using an MSI interrupt em1: Ethernet address: 00:71:21:aa:43:a5 em1: netmap queues/slots: TX 1/1024, RX 1/1024 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib3: [GIANT-LOCKED] pci3: <ACPI PCI bus> on pcib3 em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3 em2: Using an MSI interrupt em2: Ethernet address: 00:71:21:aa:43:a6 em2: netmap queues/slots: TX 1/1024, RX 1/1024 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib4: failed to allocate initial memory window: 0xd0600000-0xd06fffff pcib4: [GIANT-LOCKED] pci4: <ACPI PCI bus> on pcib4 em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f irq 19 at device 0.0 on pci4 em3: 0x20000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff). em3: Unable to allocate bus resource: memory em3: Allocation of PCI resources failed device_attach: em3 attach returned 6 ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a01000-0xd0a013ff irq 23 at device 29.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Sleep Button> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 Timecounters tick every 1.000 msec ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub0: 8 ports with 8 removable, self powered ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0 uhub1: 4 ports with 4 removable, self powered ugen0.3: <vendor 0x0bda product 0x8189> at usbus0 urtw0 on uhub1 urtw0: <vendor 0x0bda product 0x8189, class 0/0, rev 2.00/2.00, addr 3> on usbus0 urtw0: rtl8187b rf rtl8225z2 hwrev e ugen0.4: <LITEON Technology USB Keyboard> at usbus0 ukbd0 on uhub1 ukbd0: <EP1 Interrupt> on usbus0 kbd1 at ukbd0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device ada0: Serial Number 1611143330 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 30533MB (62533296 512 byte sectors) Trying to mount root from ufs:/dev/gptid/b3b3ce75-9d81-11e8-a6f3-007121aa43a4 [rw]... random: unblocking device. CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics -
@nrw said in pfsense 2.4.4 - em3 interface disapeared after upgrade:
em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f irq 19 at device 0.0 on pci4
em3: 0x20000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
em3: Unable to allocate bus resource: memory
em3: Allocation of PCI resources failed
device_attach: em3 attach returned 6There's the problem. It couldn't allocate enough memory to the device.
What do you have in
/boot/loader.confand/boot/loader.conf.local?You could try adding something like this to
/boot/loader.conf.local:kern.ipc.nmbclusters="1000000" kern.ipc.nmbjumbop="524288" kern.ipc.nmbjumbo9="524288"And then reboot.
-
/boot/loader.conf:
kern.cam.boot_delay=10000 autoboot_delay="3" hw.usb.no_pf="1"/boot/loader.conf.local:
i915kms_load="YES" drm.i915.enable_unsupported=1Zero effect after adding to /boot/loader.conf.local and reboot:
kern.ipc.nmbclusters="1000000" kern.ipc.nmbjumbop="524288" kern.ipc.nmbjumbo9="524288"/var/log/dmesg.boot contains:
em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f irq 19 at device 0.0 on pci4 em3: 0x20000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff). em3: Unable to allocate bus resource: memory em3: Allocation of PCI resources failed device_attach: em3 attach returned 6 -
OK, try adding this to
/boot/loader.conf.localand then reboot again:hint.agp.0.disabled=1 -
nothing changed, same error
-
If you could, reboot the box and from the console boot menu choose the option for a verbose boot. That should print additional error detail into the boot log/dmesg that hopefully will point in a more specific direction.
Somehow it's failing to allocate enough memory to allow that NIC to work. Usually the settings I had you add would help in that regard. It's possible that it's a driver issue in FreeBSD 11.2, you could try booting a FreeBSD 11.2 image to see if it's detected there.
You might also check for a BIOS update, or see if there are any PCI bus resource options in the BIOS that could be changed.
-
var/log/dmesq.boot with verbose option (part 1):
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0a3(RELENG_2_4_4): Thu Sep 20 09:04:45 EDT 2018 root@buildbot3:/crossbuild/ce-244/obj/amd64/WvDslnYb/crossbuild/ce-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) Table 'FACP' at 0xba5a6aa0 Table 'APIC' at 0xba5a6bb0 Table 'FPDT' at 0xba5a6c38 Table 'FIDT' at 0xba5a6c80 Table 'MCFG' at 0xba5a6d20 Table 'HPET' at 0xba5a6d60 Table 'SSDT' at 0xba5a6d98 Table 'SSDT' at 0xba5a7500 Table 'SSDT' at 0xba5a7790 Table 'UEFI' at 0xba5a7910 Table 'BGRT' at 0xba5a7958 ACPI: No SRAT table found PPIM 0: PA=0xc0000000, VA=0xffffffff83210000, size=0x500000, mode=0x1 VT(efifb): resolution 1280x1024 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff83107000. Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff83108538. Preloaded elf obj module "/boot/kernel/i915kms.ko" at 0xffffffff83108590. Preloaded elf obj module "/boot/kernel/iicbb.ko" at 0xffffffff83108cb8. Preloaded elf obj module "/boot/kernel/iicbus.ko" at 0xffffffff83109260. Preloaded elf obj module "/boot/kernel/iic.ko" at 0xffffffff83109808. Preloaded elf obj module "/boot/kernel/drm2.ko" at 0xffffffff83109e30. info: [drm] Initialized drm 1.1.0 20060810 Calibrating TSC clock ... TSC clock: 2000049336 Hz CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: (disabled in BIOS) Basic Features=0xda0400<SMM,INS/OUTS,TRUE> Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr> Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE> Secondary Processor Controls=0x28ef<APIC,EPT,DT,RDTSCP,VPID,WBINVD,UG,RDRAND,VMFUNC> Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV> Entry Controls=0xda0400 EPT Features=0x6114141<XO,PW4,UC,WB,2M,INVEPT,single,all> VPID Features=0xf01<INVVPID,individual,single,all,single-globals> TSC: P-state invariant, performance statistics DTLB: 4k pages, fully associative, 32 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 KByte pages, fully associative, 48 entries DTLB: 4 KByte/2 MByte pages, 4-way associative, 16 entries L2 cache: 1024 kbytes, 16-way associative, 64 bytes/line real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000010000 - 0x000000000003afff, 176128 bytes (43 pages) 0x0000000000040000 - 0x000000000009ffff, 393216 bytes (96 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x0000000003200000 - 0x000000001effffff, 467664896 bytes (114176 pages) 0x000000001f100000 - 0x000000001fffffff, 15728640 bytes (3840 pages) 0x0000000020100000 - 0x00000000b22b0fff, 2451247104 bytes (598449 pages) 0x00000000bac05000 - 0x00000000bac05fff, 4096 bytes (1 pages) 0x00000000bac48000 - 0x00000000badb7fff, 1507328 bytes (368 pages) 0x00000000baffa000 - 0x00000000baffffff, 24576 bytes (6 pages) 0x0000000100000000 - 0x000000013ffe7fff, 1073643520 bytes (262120 pages) avail memory = 3976835072 (3792 MB) Event timer "LAPIC" quality 600 LAPIC: ipi_wait() us multiplier 37 (r 5300160 tsc 2000049336) ACPI APIC Table: <ALASKA A M I > WARNING: L1 data cache covers less APIC IDs than a core 0 < 1 Package ID shift: 4 L2 cache ID shift: 2 L1 cache ID shift: 1 Core ID shift: 1 INTR: Adding local APIC 2 as a target INTR: Adding local APIC 4 as a target INTR: Adding local APIC 6 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) Package HW ID = 0 (0) Core HW ID = 0 (0) CPU0 (BSP): APIC ID: 0 (0) Core HW ID = 1 (0x1) CPU1 (AP): APIC ID: 2 (0x2) Core HW ID = 2 (0x2) CPU2 (AP): APIC ID: 4 (0x4) Core HW ID = 3 (0x3) CPU3 (AP): APIC ID: 6 (0x6) APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 3 APIC: CPU 3 has ACPI ID 4 Pentium Pro MTRR support enabled x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000 x86bios: SSEG 0x03a000-0x03afff at 0xfffffe00ef5d9000 x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0x00000000BA5A0000 000024 (v02 ALASKA) ACPI: XSDT 0x00000000BA5A0080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: FACP 0x00000000BA5A6AA0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748) ACPI: DSDT 0x00000000BA5A0188 006911 (v02 ALASKA A M I 01072009 INTL 20120913) ACPI: FACS 0x00000000BAA9BF80 000040 ACPI: APIC 0x00000000BA5A6BB0 000084 (v03 ALASKA A M I 01072009 AMI 00010013) ACPI: FPDT 0x00000000BA5A6C38 000044 (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: FIDT 0x00000000BA5A6C80 00009C (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: MCFG 0x00000000BA5A6D20 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) ACPI: HPET 0x00000000BA5A6D60 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) ACPI: SSDT 0x00000000BA5A6D98 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: SSDT 0x00000000BA5A7500 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 0x00000000BA5A7790 00017A (v01 PmRef ApTst 00003000 INTL 20061109) ACPI: UEFI 0x00000000BA5A7910 000042 (v01 ALASKA A M I 00000000 00000000) ACPI: BGRT 0x00000000BA5A7958 000038 (v01 ALASKA A M I 01072009 AMI 00010013) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: ver 0x20 maxredir 0x56 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic2: Routing NMI -> LINT1 lapic2: LINT1 trigger: edge lapic2: LINT1 polarity: high lapic4: Routing NMI -> LINT1 lapic4: LINT1 trigger: edge lapic4: LINT1 polarity: high lapic6: Routing NMI -> LINT1 lapic6: LINT1 trigger: edge lapic6: LINT1 polarity: high MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-86 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x04000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: passed TSC synchronization test Timecounter "TSC" frequency 2000049336 Hz quality 1000 firmware: 'iwn100fw' version 0: 337572 bytes loaded at 0xffffffff81f5c978 firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xffffffff826a59c8 firmware: 'iwn105fw' version 0: 689680 bytes loaded at 0xffffffff81faf0d0 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 firmware: 'iwn135fw' version 0: 701228 bytes loaded at 0xffffffff82057790 firmware: 'iwn2000fw' version 0: 695876 bytes loaded at 0xffffffff82102b70 wlan: <802.11 Link Layer> firmware: 'iwn2030fw' version 0: 707392 bytes loaded at 0xffffffff821aca68 firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff82259658 firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffffffff82287550 firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff822da8d8 firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffffffff8232cf80 firmware: 'iwn6000g2afw' version 0: 677296 bytes loaded at 0xffffffff8239c000 firmware: 'iwn6000g2bfw' version 0: 679436 bytes loaded at 0xffffffff82441660 firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffffffff824e7520 firmware: 't4fw_cfg' version 0: 4552 bytes loaded at 0xffffffff81c01358 firmware: 't4fw_cfg_uwire' version 0: 21445 bytes loaded at 0xffffffff81c02520 firmware: 't4fw' version 0: 553984 bytes loaded at 0xffffffff81c078e5 firmware: 't5fw_cfg' version 0: 5932 bytes loaded at 0xffffffff81c8ed98 firmware: 't5fw_cfg_uwire' version 0: 21855 bytes loaded at 0xffffffff81c904c4 firmware: 't5fw' version 0: 651776 bytes loaded at 0xffffffff81c95a23 firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xffffffff82608548 firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xffffffff8260a5f8 firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xffffffff8260c6a8 firmware: 'rsu-rtl8712fw' version 120: 122328 bytes loaded at 0xffffffff8266fb80 firmware: 'runfw' version 0: 8192 bytes loaded at 0xffffffff8268dd70 firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xffffffff8260e758 firmware: 't6fw_cfg' version 0: 5782 bytes loaded at 0xffffffff81d34cd8 firmware: 't6fw_cfg_uwire' version 0: 21821 bytes loaded at 0xffffffff81d3636e firmware: 't6fw' version 0: 698368 bytes loaded at 0xffffffff81d3b8ab firmware: 'ipw_bss' version 130: 209190 bytes loaded at 0xffffffff81deb5f8 random: entropy device external interface firmware: 'ipw_ibss' version 130: 201138 bytes loaded at 0xffffffff81e1e7d0 firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xffffffff82564720 firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xffffffff8257b9fc firmware: 'mxge_eth_z8e' version 377284: 120629 bytes loaded at 0xffffffff8257c4c0 firmware: 'mxge_ethp_z8e' version 387604: 121317 bytes loaded at 0xffffffff82599cb0 firmware: 'rtwn-rtl8192cfwU' version 111: 14818 bytes loaded at 0xffffffff82611518 firmware: 'rtwn-rtl8192cfwU_B' version 111: 16332 bytes loaded at 0xffffffff82614fb0 firmware: 'mxge_rss_eth_z8e' version 534724: 151912 bytes loaded at 0xffffffff825b7750 firmware: 'mxge_rss_ethp_z8e' version 544468: 152837 bytes loaded at 0xffffffff825dc970 firmware: 'ipw_monitor' version 130: 196458 bytes loaded at 0xffffffff81e4fa38 firmware: 'iwi_bss' version 300: 191154 bytes loaded at 0xffffffff81e80168 firmware: 'iwi_ibss' version 300: 185428 bytes loaded at 0xffffffff81eaecd0 firmware: 'iwi_monitor' version 300: 187836 bytes loaded at 0xffffffff81edc1d8 firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffffffff81f0a258 wlan: mac acl policy registered hn: tranparent VF mode, if_transmit will be used, instead of if_start kbd0 at kbdmux0 mem: <memory> netmap: loaded module null: <full device, null device, zero device> nfslock: pseudo-device crypto: <crypto core> module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19 io: <I/O> random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" hpt27xx: RocketRAID 27xx controller driver v1.2.8 hptnr: R750/DC7280 controller driver v1.1.5 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 nexus0 random: harvesting attach, 8 bytes (4 bits) from ram0 cryptosoft0: <software crypto> on motherboard crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 random: harvesting attach, 8 bytes (4 bits) from cryptosoft0 padlock0: No ACE support. acpi0: <ALASKA A M I > on motherboard ACPI: 4 ACPI AML tables successfully acquired and loaded PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: Power Button (fixed) acpi0: wakeup code va 0xfffffe00ef5fd000 pa 0x38000 unknown: I/O range not supported random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource0 random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource1 cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0 cpu0: <ACPI CPU> on acpi0 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80004A2C800 0003BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80004C4F000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) random: harvesting attach, 8 bytes (4 bits) from cpu0 cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 1 cpu1: <ACPI CPU> on acpi0 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80004C46C00 00015F (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF800049B2900 00008D (v01 PmRef ApCst 00003000 INTL 20061109) random: harvesting attach, 8 bytes (4 bits) from cpu1 cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 2 cpu2: <ACPI CPU> on acpi0 random: harvesting attach, 8 bytes (4 bits) from cpu2 cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3 cpu3: <ACPI CPU> on acpi0 random: harvesting attach, 8 bytes (4 bits) from cpu3 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 48 ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49 Event timer "RTC" frequency 32768 Hz quality 0 random: harvesting attach, 8 bytes (4 bits) from atrtc0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic hpet0: t1: irqs 0x00f00000 (0) hpet0: t2: irqs 0x00f00800 (0) Timecounter "HPET" frequency 14318180 Hz quality 950 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 4 vector 48 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 random: harvesting attach, 8 bytes (4 bits) from hpet0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 6 vector 48 Event timer "i8254" frequency 1193182 Hz quality 100 random: harvesting attach, 8 bytes (4 bits) from attimer0 ACPI timer: 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 random: harvesting attach, 8 bytes (4 bits) from acpi_timer0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link0 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link1 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link2 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link3 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link4 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link5 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link6 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 3 4 5 6 10 11 12 14 15 Validation 0 4 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link7 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x10 pcib0: decoding 5 range 0-0xff pcib0: decoding 4 range 0-0x6f pcib0: decoding 4 range 0x78-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xc0000-0xdffff pcib0: decoding 3 range 0xe0000-0xfffff pcib0: decoding 3 range 0xc0000000-0xd0a02fff pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x0f00, revid=0x0e domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0f31, revid=0x0e domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xd0000000, size 22, enabled pcib0: allocated type 3 (0xd0000000-0xd03fffff) for rid 10 of pci0:0:2:0 map[18]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 18 of pci0:0:2:0 map[20]: type I/O Port, range 32, base 0xf080, size 3, enabled pcib0: allocated type 4 (0xf080-0xf087) for rid 20 of pci0:0:2:0 pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x0f23, revid=0x0e domain=0, bus=0, slot=19, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0xf070, size 3, enabled pcib0: allocated type 4 (0xf070-0xf077) for rid 10 of pci0:0:19:0 map[14]: type I/O Port, range 32, base 0xf060, size 2, enabled pcib0: allocated type 4 (0xf060-0xf063) for rid 14 of pci0:0:19:0 map[18]: type I/O Port, range 32, base 0xf050, size 3, enabled pcib0: allocated type 4 (0xf050-0xf057) for rid 18 of pci0:0:19:0 map[1c]: type I/O Port, range 32, base 0xf040, size 2, enabled pcib0: allocated type 4 (0xf040-0xf043) for rid 1c of pci0:0:19:0 map[20]: type I/O Port, range 32, base 0xf020, size 5, enabled pcib0: allocated type 4 (0xf020-0xf03f) for rid 20 of pci0:0:19:0 map[24]: type Memory, range 32, base 0xd0a02000, size 11, enabled pcib0: allocated type 3 (0xd0a02000-0xd0a027ff) for rid 24 of pci0:0:19:0 pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 19 found-> vendor=0x8086, dev=0x0f18, revid=0x0e domain=0, bus=0, slot=26, func=0 class=10-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xd0500000, size 20, memory disabled pcib0: allocated type 3 (0xd0500000-0xd05fffff) for rid 10 of pci0:0:26:0 map[14]: type Memory, range 32, base 0xd0400000, size 20, enabled pcib0: allocated type 3 (0xd0400000-0xd04fffff) for rid 14 of pci0:0:26:0 found-> vendor=0x8086, dev=0x0f48, revid=0x0e domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 secbus=1, subbus=1 found-> vendor=0x8086, dev=0x0f4a, revid=0x0e domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 secbus=2, subbus=2 found-> vendor=0x8086, dev=0x0f4c, revid=0x0e domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 secbus=3, subbus=3 found-> vendor=0x8086, dev=0x0f4e, revid=0x0e domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 secbus=4, subbus=4 found-> vendor=0x8086, dev=0x0f34, revid=0x0e domain=0, bus=0, slot=29, func=0 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0a01000, size 10, enabled pcib0: allocated type 3 (0xd0a01000-0xd0a013ff) for rid 10 of pci0:0:29:0 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x0f1c, revid=0x0e domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0f12, revid=0x0e domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=3 powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0a00000, size 5, enabled pcib0: allocated type 3 (0xd0a00000-0xd0a0001f) for rid 10 of pci0:0:31:3 map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled pcib0: allocated type 4 (0xf000-0xf01f) for rid 20 of pci0:0:31:3 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 18 random: harvesting attach, 8 bytes (4 bits) from hostb0 vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 drmn0: <Intel Valleyview (mobile)> on vgapci0 info: [drm] Memory usable by graphics device = 2048M pcib0: allocated type 3 (0xd0600000-0xd0603fff) for rid 100 of drmn0 intel_iicbb0 on drmn0 iicbus0: <Philips I2C bus> on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 random: harvesting attach, 8 bytes (4 bits) from iic0 random: harvesting attach, 8 bytes (4 bits) from iicbus0 random: harvesting attach, 8 bytes (4 bits) from iicbb0 random: harvesting attach, 8 bytes (4 bits) from intel_iicbb0 iicbus1: <Philips I2C bus> on intel_gmbus0 iic1: <I2C generic I/O> on iicbus1 random: harvesting attach, 8 bytes (4 bits) from iic1 random: harvesting attach, 8 bytes (4 bits) from iicbus1 random: harvesting attach, 8 bytes (4 bits) from intel_gmbus0 intel_iicbb1 on drmn0 iicbus2: <Philips I2C bus> on iicbb1 addr 0xff iic2: <I2C generic I/O> on iicbus2 random: harvesting attach, 8 bytes (4 bits) from iic2 random: harvesting attach, 8 bytes (4 bits) from iicbus2 random: harvesting attach, 8 bytes (4 bits) from iicbb1 random: harvesting attach, 8 bytes (4 bits) from intel_iicbb1 iicbus3: <Philips I2C bus> on intel_gmbus1 iic3: <I2C generic I/O> on iicbus3 random: harvesting attach, 8 bytes (4 bits) from iic3 random: harvesting attach, 8 bytes (4 bits) from iicbus3 random: harvesting attach, 8 bytes (4 bits) from intel_gmbus1 intel_iicbb2 on drmn0 iicbus4: <Philips I2C bus> on iicbb2 addr 0xff iic4: <I2C generic I/O> on iicbus4 random: harvesting attach, 8 bytes (4 bits) from iic4 random: harvesting attach, 8 bytes (4 bits) from iicbus4 random: harvesting attach, 8 bytes (4 bits) from iicbb2 random: harvesting attach, 8 bytes (4 bits) from intel_iicbb2 iicbus5: <Philips I2C bus> on intel_gmbus2 iic5: <I2C generic I/O> on iicbus5 random: harvesting attach, 8 bytes (4 bits) from iic5 random: harvesting attach, 8 bytes (4 bits) from iicbus5 random: harvesting attach, 8 bytes (4 bits) from intel_gmbus2 -
part 2:
intel_iicbb3 on drmn0 iicbus6: <Philips I2C bus> on iicbb3 addr 0xff iic6: <I2C generic I/O> on iicbus6 random: harvesting attach, 8 bytes (4 bits) from iic6 random: harvesting attach, 8 bytes (4 bits) from iicbus6 random: harvesting attach, 8 bytes (4 bits) from iicbb3 random: harvesting attach, 8 bytes (4 bits) from intel_iicbb3 iicbus7: <Philips I2C bus> on intel_gmbus3 iic7: <I2C generic I/O> on iicbus7 random: harvesting attach, 8 bytes (4 bits) from iic7 random: harvesting attach, 8 bytes (4 bits) from iicbus7 random: harvesting attach, 8 bytes (4 bits) from intel_gmbus3 intel_iicbb4 on drmn0 iicbus8: <Philips I2C bus> on iicbb4 addr 0xff iic8: <I2C generic I/O> on iicbus8 random: harvesting attach, 8 bytes (4 bits) from iic8 random: harvesting attach, 8 bytes (4 bits) from iicbus8 random: harvesting attach, 8 bytes (4 bits) from iicbb4 random: harvesting attach, 8 bytes (4 bits) from intel_iicbb4 iicbus9: <Philips I2C bus> on intel_gmbus4 iic9: <I2C generic I/O> on iicbus9 random: harvesting attach, 8 bytes (4 bits) from iic9 random: harvesting attach, 8 bytes (4 bits) from iicbus9 random: harvesting attach, 8 bytes (4 bits) from intel_gmbus4 intel_iicbb5 on drmn0 iicbus10: <Philips I2C bus> on iicbb5 addr 0xff iic10: <I2C generic I/O> on iicbus10 random: harvesting attach, 8 bytes (4 bits) from iic10 random: harvesting attach, 8 bytes (4 bits) from iicbus10 random: harvesting attach, 8 bytes (4 bits) from iicbb5 random: harvesting attach, 8 bytes (4 bits) from intel_iicbb5 iicbus11: <Philips I2C bus> on intel_gmbus5 iic11: <I2C generic I/O> on iicbus11 random: harvesting attach, 8 bytes (4 bits) from iic11 random: harvesting attach, 8 bytes (4 bits) from iicbus11 random: harvesting attach, 8 bytes (4 bits) from intel_gmbus5 vgapci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 51 vgapci0: using IRQ 256 for MSI info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. error: [drm:pid0:ironlake_wait_panel_status] *ERROR* Panel status timeout: status 04c70005 control abcd0005 drm_iic_dp_aux0 on drmn0 random: harvesting attach, 8 bytes (4 bits) from drm_iic_dp_aux0 info: [drm] failed to retrieve link info, disabling eDP drm_iic_dp_aux0: detached intel_sdvo_ddc_proxy397632 on drmn0 random: harvesting attach, 8 bytes (4 bits) from intel_sdvo_ddc_proxy397632 intel_sdvo_ddc_proxy397632: detached drm_iic_dp_aux1 on drmn0 random: harvesting attach, 8 bytes (4 bits) from drm_iic_dp_aux1 drmn0: taking over the fictitious range 0xc0000000-0xd0000000 info: [drm] Connector VGA-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.VGA-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-2 info: [drm] - kern.vt.fb.default_mode info: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 drmn0: warning: HDMI-A-2: EDID block 0 invalid. fbd0 on drmn0 VT: Replacing driver "efifb" with new "fb". random: harvesting attach, 8 bytes (4 bits) from fbd0 drmn0: More than 8 outputs detected info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 random: harvesting attach, 8 bytes (4 bits) from drmn0 vgapci0: Boot video device random: harvesting attach, 8 bytes (4 bits) from vgapci0 ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a02000-0xd0a027ff irq 19 at device 19.0 on pci0 ahci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 2 vector 48 ahci0: using IRQ 257 for MSI ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ ALP AL CLO 3Gbps PMD SSC PSC 32cmd 2ports ahci0: Caps2: DESO SADM SDS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: Caps: DSP random: harvesting attach, 8 bytes (4 bits) from ahcich0 ahcich1: not probed (disabled) random: harvesting attach, 8 bytes (4 bits) from ahci0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1 pcib0: allocated type 3 (0xd0900000-0xd09fffff) for rid 20 of pcib1 pcib1: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 258 to local APIC 4 vector 48 pcib1: using IRQ 258 for MSI pcib1: [GIANT-LOCKED] pcib1: HotPlug command: 0000 -> 1028 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xd0900000-0xd09fffff pci1: <ACPI PCI bus> on pcib1 pcib1: allocated bus range (1-1) for rid 0 of pci1 pci1: domain=0, physical bus=1 found-> vendor=0x8086, dev=0x150c, revid=0x00 domain=0, bus=1, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 7 messages in map 0x1c map[10]: type Memory, range 32, base 0xd0900000, size 17, enabled pcib1: allocated memory range (0xd0900000-0xd091ffff) for rid 10 of pci0:1:0:0 map[18]: type I/O Port, range 32, base 0xe000, size 5, enabled pcib1: allocated I/O port range (0xe000-0xe01f) for rid 18 of pci0:1:0:0 map[1c]: type Memory, range 32, base 0xd0920000, size 14, enabled pcib1: allocated memory range (0xd0920000-0xd0923fff) for rid 1c of pci0:1:0:0 pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 259 to local APIC 6 vector 49 em0: using IRQ 259 for MSI em0: Using an MSI interrupt em0: bpf attached em0: Ethernet address: 00:71:21:aa:43:a4 em0: netmap queues/slots: TX 1/1024, RX 1/1024 random: harvesting attach, 8 bytes (4 bits) from em0 random: harvesting attach, 8 bytes (4 bits) from pci1 random: harvesting attach, 8 bytes (4 bits) from pcib1 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib2 pcib0: allocated type 3 (0xd0800000-0xd08fffff) for rid 20 of pcib2 pcib2: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 260 to local APIC 0 vector 52 pcib2: using IRQ 260 for MSI pcib2: [GIANT-LOCKED] pcib2: HotPlug command: 0000 -> 1028 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xd0800000-0xd08fffff pci2: <ACPI PCI bus> on pcib2 pcib2: allocated bus range (2-2) for rid 0 of pci2 pci2: domain=0, physical bus=2 found-> vendor=0x8086, dev=0x150c, revid=0x00 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 7 messages in map 0x1c map[10]: type Memory, range 32, base 0xd0800000, size 17, enabled pcib2: allocated memory range (0xd0800000-0xd081ffff) for rid 10 of pci0:2:0:0 map[18]: type I/O Port, range 32, base 0xd000, size 5, enabled pcib2: allocated I/O port range (0xd000-0xd01f) for rid 18 of pci0:2:0:0 map[1c]: type Memory, range 32, base 0xd0820000, size 14, enabled pcib2: allocated memory range (0xd0820000-0xd0823fff) for rid 1c of pci0:2:0:0 pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2 em1: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 261 to local APIC 2 vector 49 em1: using IRQ 261 for MSI em1: Using an MSI interrupt em1: bpf attached em1: Ethernet address: 00:71:21:aa:43:a5 em1: netmap queues/slots: TX 1/1024, RX 1/1024 random: harvesting attach, 8 bytes (4 bits) from em1 random: harvesting attach, 8 bytes (4 bits) from pci2 random: harvesting attach, 8 bytes (4 bits) from pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib3 pcib0: allocated type 3 (0xd0700000-0xd07fffff) for rid 20 of pcib3 pcib3: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 262 to local APIC 4 vector 49 pcib3: using IRQ 262 for MSI pcib3: [GIANT-LOCKED] pcib3: HotPlug command: 0000 -> 1028 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xd0700000-0xd07fffff pci3: <ACPI PCI bus> on pcib3 pcib3: allocated bus range (3-3) for rid 0 of pci3 pci3: domain=0, physical bus=3 found-> vendor=0x8086, dev=0x150c, revid=0x00 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 7 messages in map 0x1c map[10]: type Memory, range 32, base 0xd0700000, size 17, enabled pcib3: allocated memory range (0xd0700000-0xd071ffff) for rid 10 of pci0:3:0:0 map[18]: type I/O Port, range 32, base 0xc000, size 5, enabled pcib3: allocated I/O port range (0xc000-0xc01f) for rid 18 of pci0:3:0:0 map[1c]: type Memory, range 32, base 0xd0720000, size 14, enabled pcib3: allocated memory range (0xd0720000-0xd0723fff) for rid 1c of pci0:3:0:0 pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3 em2: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 263 to local APIC 6 vector 50 em2: using IRQ 263 for MSI em2: Using an MSI interrupt em2: bpf attached em2: Ethernet address: 00:71:21:aa:43:a6 em2: netmap queues/slots: TX 1/1024, RX 1/1024 random: harvesting attach, 8 bytes (4 bits) from em2 random: harvesting attach, 8 bytes (4 bits) from pci3 random: harvesting attach, 8 bytes (4 bits) from pcib3 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib4 pcib4: failed to allocate initial memory window: 0xd0600000-0xd06fffff pcib4: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 264 to local APIC 0 vector 53 pcib4: using IRQ 264 for MSI pcib4: [GIANT-LOCKED] pcib4: HotPlug command: 0000 -> 1028 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xb000-0xbfff pci4: <ACPI PCI bus> on pcib4 pcib4: allocated bus range (4-4) for rid 0 of pci4 pci4: domain=0, physical bus=4 found-> vendor=0x8086, dev=0x150c, revid=0x00 domain=0, bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 7 messages in map 0x1c map[10]: type Memory, range 32, base 0xd0600000, size 17, enabled pcib4: failed to allocate initial memory window (0xd0600000-0xd061ffff,0x20000) pci4: pci0:4:0:0 bar 0x10 failed to allocate map[18]: type I/O Port, range 32, base 0xb000, size 5, enabled pcib4: allocated I/O port range (0xb000-0xb01f) for rid 18 of pci0:4:0:0 map[1c]: type Memory, range 32, base 0xd0620000, size 14, memory disabled pcib4: failed to allocate initial memory window (0xd0620000-0xd0623fff,0x4000) pci4: pci0:4:0:0 bar 0x1c failed to allocate pcib4: matched entry for 4.0.INTA pcib4: slot 0 INTA hardwired to IRQ 19 em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f irq 19 at device 0.0 on pci4 pcib4: failed to allocate initial memory window (0-0xffffffff,0x20000) em3: 0x20000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff). em3: Unable to allocate bus resource: memory em3: Allocation of PCI resources failed device_attach: em3 attach returned 6 random: harvesting attach, 8 bytes (4 bits) from pci4 random: harvesting attach, 8 bytes (4 bits) from pcib4 ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a01000-0xd0a013ff irq 23 at device 29.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 50 usbus0: EHCI version 1.0 usbus0 on ehci0 ehci0: usbpf: Attached random: harvesting attach, 8 bytes (4 bits) from usbus0 usbus0: random: harvesting attach, 8 bytes (4 bits) from ehci0 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 random: harvesting attach, 8 bytes (4 bits) from isa0 random: harvesting attach, 8 bytes (4 bits) from isab0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) random: harvesting attach, 8 bytes (4 bits) from pci0 random: harvesting attach, 8 bytes (4 bits) from pcib0 acpi_button0: <Sleep Button> on acpi0 random: harvesting attach, 8 bytes (4 bits) from acpi_button0 ACPI: Enabled 6 GPEs in block 00 to 3F random: harvesting attach, 8 bytes (4 bits) from acpi0 AcpiOsExecute: task queue not started random: harvesting attach, 8 bytes (4 bits) from apic0 random: harvesting attach, 8 bytes (4 bits) from nexus0 pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xc0000-0xce7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xce800-0xcefff) for rid 1 of orm0 pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xcf800-0xcffff) for rid 1 of orm0 pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0 pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0 pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0 pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0 pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0 pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0 pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0 pcib0: allocated type 3 (0xe0000-0xe07ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe0800-0xe0fff) for rid 1 of orm0 pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe1800-0xe1fff) for rid 1 of orm0 pcib0: allocated type 3 (0xe2000-0xe27ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe2800-0xe2fff) for rid 1 of orm0 pcib0: allocated type 3 (0xe3000-0xe37ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe3800-0xe3fff) for rid 1 of orm0 pcib0: allocated type 3 (0xe4000-0xe47ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe4800-0xe4fff) for rid 1 of orm0 pcib0: allocated type 3 (0xe5000-0xe57ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe5800-0xe5fff) for rid 1 of orm0 pcib0: allocated type 3 (0xe6000-0xe67ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe6800-0xe6fff) for rid 1 of orm0 pcib0: allocated type 3 (0xe7000-0xe77ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe7800-0xe7fff) for rid 1 of orm0 pcib0: allocated type 3 (0xe8000-0xe87ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe8800-0xe8fff) for rid 1 of orm0 pcib0: allocated type 3 (0xe9000-0xe97ff) for rid 1 of orm0 pcib0: allocated type 3 (0xe9800-0xe9fff) for rid 1 of orm0 pcib0: allocated type 3 (0xea000-0xea7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xea800-0xeafff) for rid 1 of orm0 pcib0: allocated type 3 (0xeb000-0xeb7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xeb800-0xebfff) for rid 1 of orm0 pcib0: allocated type 3 (0xec000-0xec7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xec800-0xecfff) for rid 1 of orm0 pcib0: allocated type 3 (0xed000-0xed7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xed800-0xedfff) for rid 1 of orm0 pcib0: allocated type 3 (0xee000-0xee7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xee800-0xeefff) for rid 1 of orm0 pcib0: allocated type 3 (0xef000-0xef7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xef800-0xeffff) for rid 1 of orm0 pcib0: allocated type 3 (0xf0000-0xf07ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf0800-0xf0fff) for rid 1 of orm0 pcib0: allocated type 3 (0xf1000-0xf17ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf1800-0xf1fff) for rid 1 of orm0 pcib0: allocated type 3 (0xf2000-0xf27ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf2800-0xf2fff) for rid 1 of orm0 pcib0: allocated type 3 (0xf3000-0xf37ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf3800-0xf3fff) for rid 1 of orm0 pcib0: allocated type 3 (0xf4000-0xf47ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf4800-0xf4fff) for rid 1 of orm0 pcib0: allocated type 3 (0xf5000-0xf57ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf5800-0xf5fff) for rid 1 of orm0 pcib0: allocated type 3 (0xf6000-0xf67ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf6800-0xf6fff) for rid 1 of orm0 pcib0: allocated type 3 (0xf7000-0xf77ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf7800-0xf7fff) for rid 1 of orm0 pcib0: allocated type 3 (0xf8000-0xf87ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf8800-0xf8fff) for rid 1 of orm0 pcib0: allocated type 3 (0xf9000-0xf97ff) for rid 1 of orm0 pcib0: allocated type 3 (0xf9800-0xf9fff) for rid 1 of orm0 pcib0: allocated type 3 (0xfa000-0xfa7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xfa800-0xfafff) for rid 1 of orm0 pcib0: allocated type 3 (0xfb000-0xfb7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xfb800-0xfbfff) for rid 1 of orm0 pcib0: allocated type 3 (0xfc000-0xfc7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xfc800-0xfcfff) for rid 1 of orm0 pcib0: allocated type 3 (0xfd000-0xfd7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xfd800-0xfdfff) for rid 1 of orm0 pcib0: allocated type 3 (0xfe000-0xfe7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xfe800-0xfefff) for rid 1 of orm0 pcib0: allocated type 3 (0xff000-0xff7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xff800-0xfffff) for rid 1 of orm0 ahc_isa_identify 0: ioport 0xc00 alloc failed ahc_isa_identify 1: ioport 0x1c00 alloc failed ahc_isa_identify 2: ioport 0x2c00 alloc failed ahc_isa_identify 3: ioport 0x3c00 alloc failed ahc_isa_identify 4: ioport 0x4c00 alloc failed ahc_isa_identify 5: ioport 0x5c00 alloc failed ahc_isa_identify 6: ioport 0x6c00 alloc failed ahc_isa_identify 7: ioport 0x7c00 alloc failed ahc_isa_identify 8: ioport 0x8c00 alloc failed ahc_isa_identify 9: ioport 0x9c00 alloc failed ahc_isa_identify 10: ioport 0xac00 alloc failed ahc_isa_identify 11: ioport 0xbc00 alloc failed ahc_isa_identify 12: ioport 0xcc00 alloc failed ahc_isa_identify 13: ioport 0xdc00 alloc failed ahc_isa_identify 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0 random: harvesting attach, 8 bytes (4 bits) from orm0 sc0 failed to probe on isa0 vga0 failed to probe on isa0 pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0 pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0 atkbdc0: AT keyboard controller not found atkbdc0 failed to probe at port 0x60,0x64 on isa0 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0 failed to probe at irq 7 on isa0 pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1 uart1 failed to probe at port 0x2f8 irq 3 on isa0 isa_probe_children: probing PnP devices AcpiOsExecute: task queue not started random: harvesting attach, 8 bytes (4 bits) from acpi_perf0 AcpiOsExecute: task queue not started random: harvesting attach, 8 bytes (4 bits) from acpi_perf1 AcpiOsExecute: task queue not started random: harvesting attach, 8 bytes (4 bits) from acpi_perf2 AcpiOsExecute: task queue not started random: harvesting attach, 8 bytes (4 bits) from acpi_perf3 est0: <Enhanced SpeedStep Frequency Control> on cpu0 random: harvesting attach, 8 bytes (4 bits) from cpufreq0 random: harvesting attach, 8 bytes (4 bits) from est0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 random: harvesting attach, 8 bytes (4 bits) from cpufreq1 random: harvesting attach, 8 bytes (4 bits) from est1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 random: harvesting attach, 8 bytes (4 bits) from cpufreq2 random: harvesting attach, 8 bytes (4 bits) from est2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 random: harvesting attach, 8 bytes (4 bits) from cpufreq3 random: harvesting attach, 8 bytes (4 bits) from est3 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 41667712 Hz lapic: deadline tsc mode, Frequency 2000049336 Hz Timecounters tick every 1.000 msec enc0: bpf attached lo0: bpf attached vlan: initialized, using hash tables with chaining tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768 IPsec: Initialized Security Association Processing. pfsync0: bpf attached pflog0: bpf attached AcpiOsExecute: enqueue 5 pending tasks hpt27xx: no controller detected. hptnr: no controller detected. hptrr: no controller detected. ahcich0: AHCI reset... ahcich0: SATA connect time=100us status=00000123 ahcich0: AHCI reset: device found ahcich0: AHCI reset: device ready after 0ms ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub0: 8 ports with 8 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub0 ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0 uhub1: 4 ports with 4 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub1 ugen0.3: <vendor 0x0bda product 0x8189> at usbus0 urtw0 on uhub1 urtw0: <vendor 0x0bda product 0x8189, class 0/0, rev 2.00/2.00, addr 3> on usbus0 urtw0: rtl8187b rf rtl8225z2 hwrev e urtw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps urtw0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps random: harvesting attach, 8 bytes (4 bits) from urtw0 ugen0.4: <vendor 0x0566 product 0x3107> at usbus0 ukbd0 on uhub1 ukbd0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000 random: harvesting attach, 8 bytes (4 bits) from ukbd0 uhid0 on uhub1 uhid0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0 random: harvesting attach, 8 bytes (4 bits) from uhid0 pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 pass0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device pass0: Serial Number 1611143330 pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) pass0: Command Queueing enabled ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 GEOM: new disk ada0 ada0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device ada0: Serial Number 1611143330 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 30533MB (62533296 512 byte sectors) Trying to mount root from ufs:/dev/gptid/b3b3ce75-9d81-11e8-a6f3-007121aa43a4 [rw]... atrtc0: providing initial system time start_init: trying /sbin/init random: unblocking device. cpuctl: access to MSR registers/cpuid info. CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: (disabled in BIOS) Basic Features=0xda0400<SMM,INS/OUTS,TRUE> Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr> Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE> Secondary Processor Controls=0x28ef<APIC,EPT,DT,RDTSCP,VPID,WBINVD,UG,RDRAND,VMFUNC> Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV> Entry Controls=0xda0400 EPT Features=0x6114141<XO,PW4,UC,WB,2M,INVEPT,single,all> VPID Features=0xf01<INVVPID,individual,single,all,single-globals> TSC: P-state invariant, performance statistics DTLB: 4k pages, fully associative, 32 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 KByte pages, fully associative, 48 entries DTLB: 4 KByte/2 MByte pages, 4-way associative, 16 entries L2 cache: 1024 kbytes, 16-way associative, 64 bytes/line -
The error messages there all still seem to point toward the same resolutions when searching. The things you've already tried, or something in the BIOS not allocating resources properly.
You could try disabling MSI-X (
hw.em.enable_msix=0in/boot/loader.conf.localthen reboot), but I'd still be on the lookout for a BIOS update or a BIOS option that might be related. -
When you said "PCI bus resource options", its means something like that?
-
Yes, like that, but not being familiar with your hardware I can't offer any suggestions there. You may need to try a few changes up or down to see if you can get an improvement. Judging by the device info in
pciconfit's on bus 0, so try that first.Note what the initial values are and you can always change it back.
-
I tried to play with BIOS option, but my maximum achievement is halt pfsense on boot. Big question: why em3 worked on previous pfsense version? Maybe it not hardware issue?
-
There are a number of OS/driver changes in FreeBSD 11.2 (pfSense 2.4.4) vs 11.1 (pfSense 2.4.3). It's entirely possible some driver change had a regression for your specific card. It may also be trying a newer/faster mode that it didn't do before, or support for some other piece of conflicting hardware was added that wasn't actively in use before.
-
'Reseved Memory'? 'Reseved Memory Alignment'? At least they managed to get it right the third time. First thing I'd check, as Jim already said, was for a BIOS update for that board.
-
You might want to look at https://forum.netgate.com/post/792753 -- a poster there suggested using an alternate video console.
So REMOVE this from
/boot/loader.conf.local:i915kms_load="YES" drm.i915.enable_unsupported=1And then add this to
/boot/loader.conf.local:kern.vty=scThat may have a similar effect to disabling AGP on older hardware, freeing up enough bus resources for the additional NIC to function.
-
"kern.vty=sc" bring back em3, yes!
But now video stop working after this line:
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000var/log/dmesq.boot:
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0a3(RELENG_2_4_4): Thu Sep 20 09:04:45 EDT 2018 root@buildbot3:/crossbuild/ce-244/obj/amd64/WvDslnYb/crossbuild/ce-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3979714560 (3795 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > WARNING: L1 data cache covers less APIC IDs than a core 0 < 1 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748) ioapic0 <Version 2.0> irqs 0-86 on motherboard SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC" frequency 2000049576 Hz quality 1000 random: entropy device external interface wlan: mac acl policy registered hn: tranparent VF mode, if_transmit will be used, instead of if_start kbd0 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 cryptosoft0: <software crypto> on motherboard padlock0: No ACE support. acpi0: <ALASKA A M I > on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x10 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a02000-0xd0a027ff irq 19 at device 19.0 on pci0 ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1 em0: Using an MSI interrupt em0: Ethernet address: 00:71:21:aa:43:a4 em0: netmap queues/slots: TX 1/1024, RX 1/1024 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pcib2: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib2 em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2 em1: Using an MSI interrupt em1: Ethernet address: 00:71:21:aa:43:a5 em1: netmap queues/slots: TX 1/1024, RX 1/1024 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib3: [GIANT-LOCKED] pci3: <ACPI PCI bus> on pcib3 em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3 em2: Using an MSI interrupt em2: Ethernet address: 00:71:21:aa:43:a6 em2: netmap queues/slots: TX 1/1024, RX 1/1024 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib4: [GIANT-LOCKED] pci4: <ACPI PCI bus> on pcib4 em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4 em3: Using an MSI interrupt em3: Ethernet address: 00:71:21:aa:43:a7 em3: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a01000-0xd0a013ff irq 23 at device 29.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Sleep Button> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 Timecounters tick every 1.000 msec ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub0: 8 ports with 8 removable, self powered ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0 uhub1: 4 ports with 4 removable, self powered ugen0.3: <vendor 0x0bda product 0x8189> at usbus0 urtw0 on uhub1 urtw0: <vendor 0x0bda product 0x8189, class 0/0, rev 2.00/2.00, addr 3> on usbus0 urtw0: rtl8187b rf rtl8225z2 hwrev e ugen0.4: <vendor 0x0566 product 0x3107> at usbus0 ukbd0 on uhub1 ukbd0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0 kbd1 at ukbd0 uhid0 on uhub1 uhid0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device ada0: Serial Number 1611143330 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 30533MB (62533296 512 byte sectors) Trying to mount root from ufs:/dev/gptid/b3b3ce75-9d81-11e8-a6f3-007121aa43a4 [rw]... random: unblocking device. CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics -
From upgrade guide:
Systems with similar console problems not containing a graphics chip supported by the i915 driver may need to reinstall 2.4.4 to use a UEFI consoleCan it help in theory?
-
I'm an idiot
Decided to add parameters (i915kms_load="YES", ...) to /boot/loader.conf.local in advance, instead of checking the functionality without them. After deleting /boot/loader.conf.local, everything was OK. Excuse for troubling.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.