Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    pfsense 2.4.4 - em3 interface disapeared after upgrade

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    20 Posts 3 Posters 2.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • N
      nrw
      last edited by

      var/log/dmesq.boot with verbose option (part 1):

      Copyright (c) 1992-2018 The FreeBSD Project.
      Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      	The Regents of the University of California. All rights reserved.
      FreeBSD is a registered trademark of The FreeBSD Foundation.
      FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0a3(RELENG_2_4_4): Thu Sep 20 09:04:45 EDT 2018
          root@buildbot3:/crossbuild/ce-244/obj/amd64/WvDslnYb/crossbuild/ce-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
      FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
      Table 'FACP' at 0xba5a6aa0
      Table 'APIC' at 0xba5a6bb0
      Table 'FPDT' at 0xba5a6c38
      Table 'FIDT' at 0xba5a6c80
      Table 'MCFG' at 0xba5a6d20
      Table 'HPET' at 0xba5a6d60
      Table 'SSDT' at 0xba5a6d98
      Table 'SSDT' at 0xba5a7500
      Table 'SSDT' at 0xba5a7790
      Table 'UEFI' at 0xba5a7910
      Table 'BGRT' at 0xba5a7958
      ACPI: No SRAT table found
      PPIM 0: PA=0xc0000000, VA=0xffffffff83210000, size=0x500000, mode=0x1
      VT(efifb): resolution 1280x1024
      Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff83107000.
      Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff83108538.
      Preloaded elf obj module "/boot/kernel/i915kms.ko" at 0xffffffff83108590.
      Preloaded elf obj module "/boot/kernel/iicbb.ko" at 0xffffffff83108cb8.
      Preloaded elf obj module "/boot/kernel/iicbus.ko" at 0xffffffff83109260.
      Preloaded elf obj module "/boot/kernel/iic.ko" at 0xffffffff83109808.
      Preloaded elf obj module "/boot/kernel/drm2.ko" at 0xffffffff83109e30.
      info: [drm] Initialized drm 1.1.0 20060810
      Calibrating TSC clock ... TSC clock: 2000049336 Hz
      CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
        Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
        Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
        Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
        AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
        AMD Features2=0x101<LAHF,Prefetch>
        Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
        VT-x: (disabled in BIOS) Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
              Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
              Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
              Secondary Processor Controls=0x28ef<APIC,EPT,DT,RDTSCP,VPID,WBINVD,UG,RDRAND,VMFUNC>
              Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
              Entry Controls=0xda0400
              EPT Features=0x6114141<XO,PW4,UC,WB,2M,INVEPT,single,all>
              VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
        TSC: P-state invariant, performance statistics
      DTLB: 4k pages, fully associative, 32 entries
      Data TLB: 4 KB Pages, 4-way set associative, 128 entries
      Instruction TLB: 4 KByte pages, fully associative, 48 entries
      DTLB: 4 KByte/2 MByte pages, 4-way associative, 16 entries
      L2 cache: 1024 kbytes, 16-way associative, 64 bytes/line
      real memory  = 4294967296 (4096 MB)
      Physical memory chunk(s):
      0x0000000000010000 - 0x000000000003afff, 176128 bytes (43 pages)
      0x0000000000040000 - 0x000000000009ffff, 393216 bytes (96 pages)
      0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
      0x0000000003200000 - 0x000000001effffff, 467664896 bytes (114176 pages)
      0x000000001f100000 - 0x000000001fffffff, 15728640 bytes (3840 pages)
      0x0000000020100000 - 0x00000000b22b0fff, 2451247104 bytes (598449 pages)
      0x00000000bac05000 - 0x00000000bac05fff, 4096 bytes (1 pages)
      0x00000000bac48000 - 0x00000000badb7fff, 1507328 bytes (368 pages)
      0x00000000baffa000 - 0x00000000baffffff, 24576 bytes (6 pages)
      0x0000000100000000 - 0x000000013ffe7fff, 1073643520 bytes (262120 pages)
      avail memory = 3976835072 (3792 MB)
      Event timer "LAPIC" quality 600
      LAPIC: ipi_wait() us multiplier 37 (r 5300160 tsc 2000049336)
      ACPI APIC Table: <ALASKA A M I >
      WARNING: L1 data cache covers less APIC IDs than a core
      0 < 1
      Package ID shift: 4
      L2 cache ID shift: 2
      L1 cache ID shift: 1
      Core ID shift: 1
      INTR: Adding local APIC 2 as a target
      INTR: Adding local APIC 4 as a target
      INTR: Adding local APIC 6 as a target
      FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
      FreeBSD/SMP: 1 package(s) x 4 core(s)
      Package HW ID = 0 (0)
      	Core HW ID = 0 (0)
      		CPU0 (BSP): APIC ID: 0 (0)
      	Core HW ID = 1 (0x1)
      		CPU1 (AP): APIC ID: 2 (0x2)
      	Core HW ID = 2 (0x2)
      		CPU2 (AP): APIC ID: 4 (0x4)
      	Core HW ID = 3 (0x3)
      		CPU3 (AP): APIC ID: 6 (0x6)
      APIC: CPU 0 has ACPI ID 1
      APIC: CPU 1 has ACPI ID 2
      APIC: CPU 2 has ACPI ID 3
      APIC: CPU 3 has ACPI ID 4
      Pentium Pro MTRR support enabled
      x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
      x86bios: SSEG 0x03a000-0x03afff at 0xfffffe00ef5d9000
      x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000
      x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
      ULE: setup cpu 0
      ULE: setup cpu 1
      ULE: setup cpu 2
      ULE: setup cpu 3
      ACPI: RSDP 0x00000000BA5A0000 000024 (v02 ALASKA)
      ACPI: XSDT 0x00000000BA5A0080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
      ACPI: FACP 0x00000000BA5A6AA0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
      Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748)
      ACPI: DSDT 0x00000000BA5A0188 006911 (v02 ALASKA A M I    01072009 INTL 20120913)
      ACPI: FACS 0x00000000BAA9BF80 000040
      ACPI: APIC 0x00000000BA5A6BB0 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
      ACPI: FPDT 0x00000000BA5A6C38 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
      ACPI: FIDT 0x00000000BA5A6C80 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
      ACPI: MCFG 0x00000000BA5A6D20 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
      ACPI: HPET 0x00000000BA5A6D60 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
      ACPI: SSDT 0x00000000BA5A6D98 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
      ACPI: SSDT 0x00000000BA5A7500 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
      ACPI: SSDT 0x00000000BA5A7790 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
      ACPI: UEFI 0x00000000BA5A7910 000042 (v01 ALASKA A M I    00000000      00000000)
      ACPI: BGRT 0x00000000BA5A7958 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
      MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
      ioapic0: ver 0x20 maxredir 0x56
      ioapic0: Routing external 8259A's -> intpin 0
      lapic0: Routing NMI -> LINT1
      lapic0: LINT1 trigger: edge
      lapic0: LINT1 polarity: high
      lapic2: Routing NMI -> LINT1
      lapic2: LINT1 trigger: edge
      lapic2: LINT1 polarity: high
      lapic4: Routing NMI -> LINT1
      lapic4: LINT1 trigger: edge
      lapic4: LINT1 polarity: high
      lapic6: Routing NMI -> LINT1
      lapic6: LINT1 trigger: edge
      lapic6: LINT1 polarity: high
      MADT: Interrupt override: source 0, irq 2
      ioapic0: Routing IRQ 0 -> intpin 2
      MADT: Interrupt override: source 9, irq 9
      ioapic0: intpin 9 trigger: level
      ioapic0 <Version 2.0> irqs 0-86 on motherboard
      cpu0 BSP:
           ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
        lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
        timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400
      SMP: AP CPU #3 Launched!
      cpu3 AP:
           ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
        lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
        timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
      SMP: AP CPU #1 Launched!
      cpu1 AP:
           ID: 0x02000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
        lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
        timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
      SMP: AP CPU #2 Launched!
      cpu2 AP:
           ID: 0x04000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
        lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
        timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
      SMP: passed TSC synchronization test
      Timecounter "TSC" frequency 2000049336 Hz quality 1000
      firmware: 'iwn100fw' version 0: 337572 bytes loaded at 0xffffffff81f5c978
      firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xffffffff826a59c8
      firmware: 'iwn105fw' version 0: 689680 bytes loaded at 0xffffffff81faf0d0
      snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
      feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
      firmware: 'iwn135fw' version 0: 701228 bytes loaded at 0xffffffff82057790
      firmware: 'iwn2000fw' version 0: 695876 bytes loaded at 0xffffffff82102b70
      wlan: <802.11 Link Layer>
      firmware: 'iwn2030fw' version 0: 707392 bytes loaded at 0xffffffff821aca68
      firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff82259658
      firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffffffff82287550
      firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff822da8d8
      firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffffffff8232cf80
      firmware: 'iwn6000g2afw' version 0: 677296 bytes loaded at 0xffffffff8239c000
      firmware: 'iwn6000g2bfw' version 0: 679436 bytes loaded at 0xffffffff82441660
      firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffffffff824e7520
      firmware: 't4fw_cfg' version 0: 4552 bytes loaded at 0xffffffff81c01358
      firmware: 't4fw_cfg_uwire' version 0: 21445 bytes loaded at 0xffffffff81c02520
      firmware: 't4fw' version 0: 553984 bytes loaded at 0xffffffff81c078e5
      firmware: 't5fw_cfg' version 0: 5932 bytes loaded at 0xffffffff81c8ed98
      firmware: 't5fw_cfg_uwire' version 0: 21855 bytes loaded at 0xffffffff81c904c4
      firmware: 't5fw' version 0: 651776 bytes loaded at 0xffffffff81c95a23
      firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xffffffff82608548
      firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xffffffff8260a5f8
      firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xffffffff8260c6a8
      firmware: 'rsu-rtl8712fw' version 120: 122328 bytes loaded at 0xffffffff8266fb80
      firmware: 'runfw' version 0: 8192 bytes loaded at 0xffffffff8268dd70
      firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xffffffff8260e758
      firmware: 't6fw_cfg' version 0: 5782 bytes loaded at 0xffffffff81d34cd8
      firmware: 't6fw_cfg_uwire' version 0: 21821 bytes loaded at 0xffffffff81d3636e
      firmware: 't6fw' version 0: 698368 bytes loaded at 0xffffffff81d3b8ab
      firmware: 'ipw_bss' version 130: 209190 bytes loaded at 0xffffffff81deb5f8
      random: entropy device external interface
      firmware: 'ipw_ibss' version 130: 201138 bytes loaded at 0xffffffff81e1e7d0
      firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xffffffff82564720
      firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xffffffff8257b9fc
      firmware: 'mxge_eth_z8e' version 377284: 120629 bytes loaded at 0xffffffff8257c4c0
      firmware: 'mxge_ethp_z8e' version 387604: 121317 bytes loaded at 0xffffffff82599cb0
      firmware: 'rtwn-rtl8192cfwU' version 111: 14818 bytes loaded at 0xffffffff82611518
      firmware: 'rtwn-rtl8192cfwU_B' version 111: 16332 bytes loaded at 0xffffffff82614fb0
      firmware: 'mxge_rss_eth_z8e' version 534724: 151912 bytes loaded at 0xffffffff825b7750
      firmware: 'mxge_rss_ethp_z8e' version 544468: 152837 bytes loaded at 0xffffffff825dc970
      firmware: 'ipw_monitor' version 130: 196458 bytes loaded at 0xffffffff81e4fa38
      firmware: 'iwi_bss' version 300: 191154 bytes loaded at 0xffffffff81e80168
      firmware: 'iwi_ibss' version 300: 185428 bytes loaded at 0xffffffff81eaecd0
      firmware: 'iwi_monitor' version 300: 187836 bytes loaded at 0xffffffff81edc1d8
      firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffffffff81f0a258
      wlan: mac acl policy registered
      hn: tranparent VF mode, if_transmit will be used, instead of if_start
      kbd0 at kbdmux0
      mem: <memory>
      netmap: loaded module
      null: <full device, null device, zero device>
      nfslock: pseudo-device
      crypto: <crypto core>
      module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19
      io: <I/O>
      random: registering fast source Intel Secure Key RNG
      random: fast provider: "Intel Secure Key RNG"
      hpt27xx: RocketRAID 27xx controller driver v1.2.8
      hptnr: R750/DC7280 controller driver v1.1.5
      hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
      nexus0
      random: harvesting attach, 8 bytes (4 bits) from ram0
      cryptosoft0: <software crypto> on motherboard
      crypto: assign cryptosoft0 driver id 0, flags 100663296
      crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
      random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
      padlock0: No ACE support.
      acpi0: <ALASKA A M I > on motherboard
      ACPI: 4 ACPI AML tables successfully acquired and loaded
      PCIe: Memory Mapped configuration base @ 0xe0000000
      ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
      acpi0: Power Button (fixed)
      acpi0: wakeup code va 0xfffffe00ef5fd000 pa 0x38000
      unknown: I/O range not supported
      random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource0
      random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource1
      cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
      cpu0: <ACPI CPU> on acpi0
      ACPI: Dynamic OEM Table Load:
      ACPI: SSDT 0xFFFFF80004A2C800 0003BC (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
      ACPI: Dynamic OEM Table Load:
      ACPI: SSDT 0xFFFFF80004C4F000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
      random: harvesting attach, 8 bytes (4 bits) from cpu0
      cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 1
      cpu1: <ACPI CPU> on acpi0
      ACPI: Dynamic OEM Table Load:
      ACPI: SSDT 0xFFFFF80004C46C00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
      ACPI: Dynamic OEM Table Load:
      ACPI: SSDT 0xFFFFF800049B2900 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
      random: harvesting attach, 8 bytes (4 bits) from cpu1
      cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 2
      cpu2: <ACPI CPU> on acpi0
      random: harvesting attach, 8 bytes (4 bits) from cpu2
      cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3
      cpu3: <ACPI CPU> on acpi0
      random: harvesting attach, 8 bytes (4 bits) from cpu3
      atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
      atrtc0: Warning: Couldn't map I/O.
      atrtc0: registered as a time-of-day clock, resolution 1.000000s
      ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 48
      ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
      Event timer "RTC" frequency 32768 Hz quality 0
      random: harvesting attach, 8 bytes (4 bits) from atrtc0
      hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
      hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
      hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
      hpet0:  t1: irqs 0x00f00000 (0)
      hpet0:  t2: irqs 0x00f00800 (0)
      Timecounter "HPET" frequency 14318180 Hz quality 950
      ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 4 vector 48
      ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50
      Event timer "HPET" frequency 14318180 Hz quality 450
      Event timer "HPET1" frequency 14318180 Hz quality 440
      Event timer "HPET2" frequency 14318180 Hz quality 440
      random: harvesting attach, 8 bytes (4 bits) from hpet0
      attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
      Timecounter "i8254" frequency 1193182 Hz quality 0
      ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 6 vector 48
      Event timer "i8254" frequency 1193182 Hz quality 100
      random: harvesting attach, 8 bytes (4 bits) from attimer0
      ACPI timer: 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 -> 0
      Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
      acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
      random: harvesting attach, 8 bytes (4 bits) from acpi_timer0
      pci_link0:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
        Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
        After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
      random: harvesting attach, 8 bytes (4 bits) from pci_link0
      pci_link1:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe       0    5   N     0  3 4 5 6 10 11 12 14 15
        Validation          0    5   N     0  3 4 5 6 10 11 12 14 15
        After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
      random: harvesting attach, 8 bytes (4 bits) from pci_link1
      pci_link2:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe       0    3   N     0  3 4 5 6 10 11 12 14 15
        Validation          0    3   N     0  3 4 5 6 10 11 12 14 15
        After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
      random: harvesting attach, 8 bytes (4 bits) from pci_link2
      pci_link3:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
        Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
        After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
      random: harvesting attach, 8 bytes (4 bits) from pci_link3
      pci_link4:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
        Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
        After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
      random: harvesting attach, 8 bytes (4 bits) from pci_link4
      pci_link5:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
        Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
        After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
      random: harvesting attach, 8 bytes (4 bits) from pci_link5
      pci_link6:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
        Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
        After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
      random: harvesting attach, 8 bytes (4 bits) from pci_link6
      pci_link7:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe       0    4   N     0  3 4 5 6 10 11 12 14 15
        Validation          0    4   N     0  3 4 5 6 10 11 12 14 15
        After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
      random: harvesting attach, 8 bytes (4 bits) from pci_link7
      pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
      pcib0: _OSC returned error 0x10
      pcib0: decoding 5 range 0-0xff
      pcib0: decoding 4 range 0-0x6f
      pcib0: decoding 4 range 0x78-0xcf7
      pcib0: decoding 4 range 0xd00-0xffff
      pcib0: decoding 3 range 0xa0000-0xbffff
      pcib0: decoding 3 range 0xc0000-0xdffff
      pcib0: decoding 3 range 0xe0000-0xfffff
      pcib0: decoding 3 range 0xc0000000-0xd0a02fff
      pci0: <ACPI PCI bus> on pcib0
      pci0: domain=0, physical bus=0
      found->	vendor=0x8086, dev=0x0f00, revid=0x0e
      	domain=0, bus=0, slot=0, func=0
      	class=06-00-00, hdrtype=0x00, mfdev=0
      	cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      found->	vendor=0x8086, dev=0x0f31, revid=0x0e
      	domain=0, bus=0, slot=2, func=0
      	class=03-00-00, hdrtype=0x00, mfdev=0
      	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      	intpin=a, irq=11
      	powerspec 2  supports D0 D3  current D0
      	MSI supports 1 message
      	map[10]: type Memory, range 32, base 0xd0000000, size 22, enabled
      pcib0: allocated type 3 (0xd0000000-0xd03fffff) for rid 10 of pci0:0:2:0
      	map[18]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled
      pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 18 of pci0:0:2:0
      	map[20]: type I/O Port, range 32, base 0xf080, size  3, enabled
      pcib0: allocated type 4 (0xf080-0xf087) for rid 20 of pci0:0:2:0
      pcib0: matched entry for 0.2.INTA
      pcib0: slot 2 INTA hardwired to IRQ 16
      found->	vendor=0x8086, dev=0x0f23, revid=0x0e
      	domain=0, bus=0, slot=19, func=0
      	class=01-06-01, hdrtype=0x00, mfdev=0
      	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      	intpin=a, irq=10
      	powerspec 3  supports D0 D3  current D0
      	MSI supports 1 message
      	map[10]: type I/O Port, range 32, base 0xf070, size  3, enabled
      pcib0: allocated type 4 (0xf070-0xf077) for rid 10 of pci0:0:19:0
      	map[14]: type I/O Port, range 32, base 0xf060, size  2, enabled
      pcib0: allocated type 4 (0xf060-0xf063) for rid 14 of pci0:0:19:0
      	map[18]: type I/O Port, range 32, base 0xf050, size  3, enabled
      pcib0: allocated type 4 (0xf050-0xf057) for rid 18 of pci0:0:19:0
      	map[1c]: type I/O Port, range 32, base 0xf040, size  2, enabled
      pcib0: allocated type 4 (0xf040-0xf043) for rid 1c of pci0:0:19:0
      	map[20]: type I/O Port, range 32, base 0xf020, size  5, enabled
      pcib0: allocated type 4 (0xf020-0xf03f) for rid 20 of pci0:0:19:0
      	map[24]: type Memory, range 32, base 0xd0a02000, size 11, enabled
      pcib0: allocated type 3 (0xd0a02000-0xd0a027ff) for rid 24 of pci0:0:19:0
      pcib0: matched entry for 0.19.INTA
      pcib0: slot 19 INTA hardwired to IRQ 19
      found->	vendor=0x8086, dev=0x0f18, revid=0x0e
      	domain=0, bus=0, slot=26, func=0
      	class=10-80-00, hdrtype=0x00, mfdev=0
      	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      	intpin=a, irq=255
      	powerspec 3  supports D0 D3  current D0
      	MSI supports 1 message
      	map[10]: type Memory, range 32, base 0xd0500000, size 20, memory disabled
      pcib0: allocated type 3 (0xd0500000-0xd05fffff) for rid 10 of pci0:0:26:0
      	map[14]: type Memory, range 32, base 0xd0400000, size 20, enabled
      pcib0: allocated type 3 (0xd0400000-0xd04fffff) for rid 14 of pci0:0:26:0
      found->	vendor=0x8086, dev=0x0f48, revid=0x0e
      	domain=0, bus=0, slot=28, func=0
      	class=06-04-00, hdrtype=0x01, mfdev=1
      	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      	intpin=a, irq=11
      	powerspec 3  supports D0 D3  current D0
      	MSI supports 1 message
      pcib0: matched entry for 0.28.INTA
      pcib0: slot 28 INTA hardwired to IRQ 16
      	secbus=1, subbus=1
      found->	vendor=0x8086, dev=0x0f4a, revid=0x0e
      	domain=0, bus=0, slot=28, func=1
      	class=06-04-00, hdrtype=0x01, mfdev=1
      	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      	intpin=b, irq=5
      	powerspec 3  supports D0 D3  current D0
      	MSI supports 1 message
      pcib0: matched entry for 0.28.INTB
      pcib0: slot 28 INTB hardwired to IRQ 17
      	secbus=2, subbus=2
      found->	vendor=0x8086, dev=0x0f4c, revid=0x0e
      	domain=0, bus=0, slot=28, func=2
      	class=06-04-00, hdrtype=0x01, mfdev=1
      	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      	intpin=c, irq=3
      	powerspec 3  supports D0 D3  current D0
      	MSI supports 1 message
      pcib0: matched entry for 0.28.INTC
      pcib0: slot 28 INTC hardwired to IRQ 18
      	secbus=3, subbus=3
      found->	vendor=0x8086, dev=0x0f4e, revid=0x0e
      	domain=0, bus=0, slot=28, func=3
      	class=06-04-00, hdrtype=0x01, mfdev=1
      	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      	intpin=d, irq=10
      	powerspec 3  supports D0 D3  current D0
      	MSI supports 1 message
      pcib0: matched entry for 0.28.INTD
      pcib0: slot 28 INTD hardwired to IRQ 19
      	secbus=4, subbus=4
      found->	vendor=0x8086, dev=0x0f34, revid=0x0e
      	domain=0, bus=0, slot=29, func=0
      	class=0c-03-20, hdrtype=0x00, mfdev=0
      	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      	intpin=a, irq=4
      	powerspec 3  supports D0 D3  current D0
      	map[10]: type Memory, range 32, base 0xd0a01000, size 10, enabled
      pcib0: allocated type 3 (0xd0a01000-0xd0a013ff) for rid 10 of pci0:0:29:0
      pcib0: matched entry for 0.29.INTA
      pcib0: slot 29 INTA hardwired to IRQ 23
      found->	vendor=0x8086, dev=0x0f1c, revid=0x0e
      	domain=0, bus=0, slot=31, func=0
      	class=06-01-00, hdrtype=0x00, mfdev=1
      	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      found->	vendor=0x8086, dev=0x0f12, revid=0x0e
      	domain=0, bus=0, slot=31, func=3
      	class=0c-05-00, hdrtype=0x00, mfdev=0
      	cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
      	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      	intpin=b, irq=3
      	powerspec 3  supports D0 D3  current D0
      	map[10]: type Memory, range 32, base 0xd0a00000, size  5, enabled
      pcib0: allocated type 3 (0xd0a00000-0xd0a0001f) for rid 10 of pci0:0:31:3
      	map[20]: type I/O Port, range 32, base 0xf000, size  5, enabled
      pcib0: allocated type 4 (0xf000-0xf01f) for rid 20 of pci0:0:31:3
      pcib0: matched entry for 0.31.INTB
      pcib0: slot 31 INTB hardwired to IRQ 18
      random: harvesting attach, 8 bytes (4 bits) from hostb0
      vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
      drmn0: <Intel Valleyview (mobile)> on vgapci0
      info: [drm] Memory usable by graphics device = 2048M
      pcib0: allocated type 3 (0xd0600000-0xd0603fff) for rid 100 of drmn0
      intel_iicbb0 on drmn0
      iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
      iic0: <I2C generic I/O> on iicbus0
      random: harvesting attach, 8 bytes (4 bits) from iic0
      random: harvesting attach, 8 bytes (4 bits) from iicbus0
      random: harvesting attach, 8 bytes (4 bits) from iicbb0
      random: harvesting attach, 8 bytes (4 bits) from intel_iicbb0
      iicbus1: <Philips I2C bus> on intel_gmbus0
      iic1: <I2C generic I/O> on iicbus1
      random: harvesting attach, 8 bytes (4 bits) from iic1
      random: harvesting attach, 8 bytes (4 bits) from iicbus1
      random: harvesting attach, 8 bytes (4 bits) from intel_gmbus0
      intel_iicbb1 on drmn0
      iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
      iic2: <I2C generic I/O> on iicbus2
      random: harvesting attach, 8 bytes (4 bits) from iic2
      random: harvesting attach, 8 bytes (4 bits) from iicbus2
      random: harvesting attach, 8 bytes (4 bits) from iicbb1
      random: harvesting attach, 8 bytes (4 bits) from intel_iicbb1
      iicbus3: <Philips I2C bus> on intel_gmbus1
      iic3: <I2C generic I/O> on iicbus3
      random: harvesting attach, 8 bytes (4 bits) from iic3
      random: harvesting attach, 8 bytes (4 bits) from iicbus3
      random: harvesting attach, 8 bytes (4 bits) from intel_gmbus1
      intel_iicbb2 on drmn0
      iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
      iic4: <I2C generic I/O> on iicbus4
      random: harvesting attach, 8 bytes (4 bits) from iic4
      random: harvesting attach, 8 bytes (4 bits) from iicbus4
      random: harvesting attach, 8 bytes (4 bits) from iicbb2
      random: harvesting attach, 8 bytes (4 bits) from intel_iicbb2
      iicbus5: <Philips I2C bus> on intel_gmbus2
      iic5: <I2C generic I/O> on iicbus5
      random: harvesting attach, 8 bytes (4 bits) from iic5
      random: harvesting attach, 8 bytes (4 bits) from iicbus5
      random: harvesting attach, 8 bytes (4 bits) from intel_gmbus2
      
      1 Reply Last reply Reply Quote 0
      • N
        nrw
        last edited by

        part 2:

        intel_iicbb3 on drmn0
        iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
        iic6: <I2C generic I/O> on iicbus6
        random: harvesting attach, 8 bytes (4 bits) from iic6
        random: harvesting attach, 8 bytes (4 bits) from iicbus6
        random: harvesting attach, 8 bytes (4 bits) from iicbb3
        random: harvesting attach, 8 bytes (4 bits) from intel_iicbb3
        iicbus7: <Philips I2C bus> on intel_gmbus3
        iic7: <I2C generic I/O> on iicbus7
        random: harvesting attach, 8 bytes (4 bits) from iic7
        random: harvesting attach, 8 bytes (4 bits) from iicbus7
        random: harvesting attach, 8 bytes (4 bits) from intel_gmbus3
        intel_iicbb4 on drmn0
        iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
        iic8: <I2C generic I/O> on iicbus8
        random: harvesting attach, 8 bytes (4 bits) from iic8
        random: harvesting attach, 8 bytes (4 bits) from iicbus8
        random: harvesting attach, 8 bytes (4 bits) from iicbb4
        random: harvesting attach, 8 bytes (4 bits) from intel_iicbb4
        iicbus9: <Philips I2C bus> on intel_gmbus4
        iic9: <I2C generic I/O> on iicbus9
        random: harvesting attach, 8 bytes (4 bits) from iic9
        random: harvesting attach, 8 bytes (4 bits) from iicbus9
        random: harvesting attach, 8 bytes (4 bits) from intel_gmbus4
        intel_iicbb5 on drmn0
        iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
        iic10: <I2C generic I/O> on iicbus10
        random: harvesting attach, 8 bytes (4 bits) from iic10
        random: harvesting attach, 8 bytes (4 bits) from iicbus10
        random: harvesting attach, 8 bytes (4 bits) from iicbb5
        random: harvesting attach, 8 bytes (4 bits) from intel_iicbb5
        iicbus11: <Philips I2C bus> on intel_gmbus5
        iic11: <I2C generic I/O> on iicbus11
        random: harvesting attach, 8 bytes (4 bits) from iic11
        random: harvesting attach, 8 bytes (4 bits) from iicbus11
        random: harvesting attach, 8 bytes (4 bits) from intel_gmbus5
        vgapci0: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 256 to local APIC 0 vector 51
        vgapci0: using IRQ 256 for MSI
        info: [drm] MSI enabled 1 message(s)
        info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
        info: [drm] Driver supports precise vblank timestamp query.
        error: [drm:pid0:ironlake_wait_panel_status] *ERROR* Panel status timeout: status 04c70005 control abcd0005
        drm_iic_dp_aux0 on drmn0
        random: harvesting attach, 8 bytes (4 bits) from drm_iic_dp_aux0
        info: [drm] failed to retrieve link info, disabling eDP
        drm_iic_dp_aux0: detached
        intel_sdvo_ddc_proxy397632 on drmn0
        random: harvesting attach, 8 bytes (4 bits) from intel_sdvo_ddc_proxy397632
        intel_sdvo_ddc_proxy397632: detached
        drm_iic_dp_aux1 on drmn0
        random: harvesting attach, 8 bytes (4 bits) from drm_iic_dp_aux1
        drmn0: taking over the fictitious range 0xc0000000-0xd0000000
        info: [drm] Connector VGA-1: get mode from tunables:
        info: [drm]   - kern.vt.fb.modes.VGA-1
        info: [drm]   - kern.vt.fb.default_mode
        info: [drm] Connector HDMI-A-1: get mode from tunables:
        info: [drm]   - kern.vt.fb.modes.HDMI-A-1
        info: [drm]   - kern.vt.fb.default_mode
        info: [drm] Connector DP-1: get mode from tunables:
        info: [drm]   - kern.vt.fb.modes.DP-1
        info: [drm]   - kern.vt.fb.default_mode
        info: [drm] Connector HDMI-A-2: get mode from tunables:
        info: [drm]   - kern.vt.fb.modes.HDMI-A-2
        info: [drm]   - kern.vt.fb.default_mode
        info: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
        00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
        drmn0: warning: HDMI-A-2: EDID block 0 invalid.
        fbd0 on drmn0
        VT: Replacing driver "efifb" with new "fb".
        random: harvesting attach, 8 bytes (4 bits) from fbd0
        drmn0: More than 8 outputs detected
        info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
        random: harvesting attach, 8 bytes (4 bits) from drmn0
        vgapci0: Boot video device
        random: harvesting attach, 8 bytes (4 bits) from vgapci0
        ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a02000-0xd0a027ff irq 19 at device 19.0 on pci0
        ahci0: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 257 to local APIC 2 vector 48
        ahci0: using IRQ 257 for MSI
        ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
        ahci0: Caps: 64bit NCQ ALP AL CLO 3Gbps PMD SSC PSC 32cmd 2ports
        ahci0: Caps2: DESO SADM SDS
        ahcich0: <AHCI channel> at channel 0 on ahci0
        ahcich0: Caps: DSP
        random: harvesting attach, 8 bytes (4 bits) from ahcich0
        ahcich1: not probed (disabled)
        random: harvesting attach, 8 bytes (4 bits) from ahci0
        pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
        pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
        pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1
        pcib0: allocated type 3 (0xd0900000-0xd09fffff) for rid 20 of pcib1
        pcib1: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 258 to local APIC 4 vector 48
        pcib1: using IRQ 258 for MSI
        pcib1: [GIANT-LOCKED]
        pcib1: HotPlug command: 0000 -> 1028
        pcib1:   domain            0
        pcib1:   secondary bus     1
        pcib1:   subordinate bus   1
        pcib1:   I/O decode        0xe000-0xefff
        pcib1:   memory decode     0xd0900000-0xd09fffff
        pci1: <ACPI PCI bus> on pcib1
        pcib1: allocated bus range (1-1) for rid 0 of pci1
        pci1: domain=0, physical bus=1
        found->	vendor=0x8086, dev=0x150c, revid=0x00
        	domain=0, bus=1, slot=0, func=0
        	class=02-00-00, hdrtype=0x00, mfdev=0
        	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        	intpin=a, irq=11
        	powerspec 2  supports D0 D3  current D0
        	MSI supports 1 message, 64 bit
        	MSI-X supports 7 messages in map 0x1c
        	map[10]: type Memory, range 32, base 0xd0900000, size 17, enabled
        pcib1: allocated memory range (0xd0900000-0xd091ffff) for rid 10 of pci0:1:0:0
        	map[18]: type I/O Port, range 32, base 0xe000, size  5, enabled
        pcib1: allocated I/O port range (0xe000-0xe01f) for rid 18 of pci0:1:0:0
        	map[1c]: type Memory, range 32, base 0xd0920000, size 14, enabled
        pcib1: allocated memory range (0xd0920000-0xd0923fff) for rid 1c of pci0:1:0:0
        pcib1: matched entry for 1.0.INTA
        pcib1: slot 0 INTA hardwired to IRQ 16
        em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
        em0: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 259 to local APIC 6 vector 49
        em0: using IRQ 259 for MSI
        em0: Using an MSI interrupt
        em0: bpf attached
        em0: Ethernet address: 00:71:21:aa:43:a4
        em0: netmap queues/slots: TX 1/1024, RX 1/1024
        random: harvesting attach, 8 bytes (4 bits) from em0
        random: harvesting attach, 8 bytes (4 bits) from pci1
        random: harvesting attach, 8 bytes (4 bits) from pcib1
        pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
        pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib2
        pcib0: allocated type 3 (0xd0800000-0xd08fffff) for rid 20 of pcib2
        pcib2: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 260 to local APIC 0 vector 52
        pcib2: using IRQ 260 for MSI
        pcib2: [GIANT-LOCKED]
        pcib2: HotPlug command: 0000 -> 1028
        pcib2:   domain            0
        pcib2:   secondary bus     2
        pcib2:   subordinate bus   2
        pcib2:   I/O decode        0xd000-0xdfff
        pcib2:   memory decode     0xd0800000-0xd08fffff
        pci2: <ACPI PCI bus> on pcib2
        pcib2: allocated bus range (2-2) for rid 0 of pci2
        pci2: domain=0, physical bus=2
        found->	vendor=0x8086, dev=0x150c, revid=0x00
        	domain=0, bus=2, slot=0, func=0
        	class=02-00-00, hdrtype=0x00, mfdev=0
        	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        	intpin=a, irq=5
        	powerspec 2  supports D0 D3  current D0
        	MSI supports 1 message, 64 bit
        	MSI-X supports 7 messages in map 0x1c
        	map[10]: type Memory, range 32, base 0xd0800000, size 17, enabled
        pcib2: allocated memory range (0xd0800000-0xd081ffff) for rid 10 of pci0:2:0:0
        	map[18]: type I/O Port, range 32, base 0xd000, size  5, enabled
        pcib2: allocated I/O port range (0xd000-0xd01f) for rid 18 of pci0:2:0:0
        	map[1c]: type Memory, range 32, base 0xd0820000, size 14, enabled
        pcib2: allocated memory range (0xd0820000-0xd0823fff) for rid 1c of pci0:2:0:0
        pcib2: matched entry for 2.0.INTA
        pcib2: slot 0 INTA hardwired to IRQ 17
        em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
        em1: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 261 to local APIC 2 vector 49
        em1: using IRQ 261 for MSI
        em1: Using an MSI interrupt
        em1: bpf attached
        em1: Ethernet address: 00:71:21:aa:43:a5
        em1: netmap queues/slots: TX 1/1024, RX 1/1024
        random: harvesting attach, 8 bytes (4 bits) from em1
        random: harvesting attach, 8 bytes (4 bits) from pci2
        random: harvesting attach, 8 bytes (4 bits) from pcib2
        pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
        pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib3
        pcib0: allocated type 3 (0xd0700000-0xd07fffff) for rid 20 of pcib3
        pcib3: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 262 to local APIC 4 vector 49
        pcib3: using IRQ 262 for MSI
        pcib3: [GIANT-LOCKED]
        pcib3: HotPlug command: 0000 -> 1028
        pcib3:   domain            0
        pcib3:   secondary bus     3
        pcib3:   subordinate bus   3
        pcib3:   I/O decode        0xc000-0xcfff
        pcib3:   memory decode     0xd0700000-0xd07fffff
        pci3: <ACPI PCI bus> on pcib3
        pcib3: allocated bus range (3-3) for rid 0 of pci3
        pci3: domain=0, physical bus=3
        found->	vendor=0x8086, dev=0x150c, revid=0x00
        	domain=0, bus=3, slot=0, func=0
        	class=02-00-00, hdrtype=0x00, mfdev=0
        	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        	intpin=a, irq=3
        	powerspec 2  supports D0 D3  current D0
        	MSI supports 1 message, 64 bit
        	MSI-X supports 7 messages in map 0x1c
        	map[10]: type Memory, range 32, base 0xd0700000, size 17, enabled
        pcib3: allocated memory range (0xd0700000-0xd071ffff) for rid 10 of pci0:3:0:0
        	map[18]: type I/O Port, range 32, base 0xc000, size  5, enabled
        pcib3: allocated I/O port range (0xc000-0xc01f) for rid 18 of pci0:3:0:0
        	map[1c]: type Memory, range 32, base 0xd0720000, size 14, enabled
        pcib3: allocated memory range (0xd0720000-0xd0723fff) for rid 1c of pci0:3:0:0
        pcib3: matched entry for 3.0.INTA
        pcib3: slot 0 INTA hardwired to IRQ 18
        em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
        em2: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 263 to local APIC 6 vector 50
        em2: using IRQ 263 for MSI
        em2: Using an MSI interrupt
        em2: bpf attached
        em2: Ethernet address: 00:71:21:aa:43:a6
        em2: netmap queues/slots: TX 1/1024, RX 1/1024
        random: harvesting attach, 8 bytes (4 bits) from em2
        random: harvesting attach, 8 bytes (4 bits) from pci3
        random: harvesting attach, 8 bytes (4 bits) from pcib3
        pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
        pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib4
        pcib4: failed to allocate initial memory window: 0xd0600000-0xd06fffff
        pcib4: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 264 to local APIC 0 vector 53
        pcib4: using IRQ 264 for MSI
        pcib4: [GIANT-LOCKED]
        pcib4: HotPlug command: 0000 -> 1028
        pcib4:   domain            0
        pcib4:   secondary bus     4
        pcib4:   subordinate bus   4
        pcib4:   I/O decode        0xb000-0xbfff
        pci4: <ACPI PCI bus> on pcib4
        pcib4: allocated bus range (4-4) for rid 0 of pci4
        pci4: domain=0, physical bus=4
        found->	vendor=0x8086, dev=0x150c, revid=0x00
        	domain=0, bus=4, slot=0, func=0
        	class=02-00-00, hdrtype=0x00, mfdev=0
        	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        	intpin=a, irq=10
        	powerspec 2  supports D0 D3  current D0
        	MSI supports 1 message, 64 bit
        	MSI-X supports 7 messages in map 0x1c
        	map[10]: type Memory, range 32, base 0xd0600000, size 17, enabled
        pcib4: failed to allocate initial memory window (0xd0600000-0xd061ffff,0x20000)
        pci4: pci0:4:0:0 bar 0x10 failed to allocate
        	map[18]: type I/O Port, range 32, base 0xb000, size  5, enabled
        pcib4: allocated I/O port range (0xb000-0xb01f) for rid 18 of pci0:4:0:0
        	map[1c]: type Memory, range 32, base 0xd0620000, size 14, memory disabled
        pcib4: failed to allocate initial memory window (0xd0620000-0xd0623fff,0x4000)
        pci4: pci0:4:0:0 bar 0x1c failed to allocate
        pcib4: matched entry for 4.0.INTA
        pcib4: slot 0 INTA hardwired to IRQ 19
        em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f irq 19 at device 0.0 on pci4
        pcib4: failed to allocate initial memory window (0-0xffffffff,0x20000)
        em3: 0x20000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
        em3: Unable to allocate bus resource: memory
        em3: Allocation of PCI resources failed
        device_attach: em3 attach returned 6
        random: harvesting attach, 8 bytes (4 bits) from pci4
        random: harvesting attach, 8 bytes (4 bits) from pcib4
        ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a01000-0xd0a013ff irq 23 at device 29.0 on pci0
        ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 50
        usbus0: EHCI version 1.0
        usbus0 on ehci0
        ehci0: usbpf: Attached
        random: harvesting attach, 8 bytes (4 bits) from usbus0
        usbus0: random: harvesting attach, 8 bytes (4 bits) from ehci0
        480Mbps High Speed USB v2.0
        isab0: <PCI-ISA bridge> at device 31.0 on pci0
        isa0: <ISA bus> on isab0
        random: harvesting attach, 8 bytes (4 bits) from isa0
        random: harvesting attach, 8 bytes (4 bits) from isab0
        pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
        random: harvesting attach, 8 bytes (4 bits) from pci0
        random: harvesting attach, 8 bytes (4 bits) from pcib0
        acpi_button0: <Sleep Button> on acpi0
        random: harvesting attach, 8 bytes (4 bits) from acpi_button0
        ACPI: Enabled 6 GPEs in block 00 to 3F
        random: harvesting attach, 8 bytes (4 bits) from acpi0
        AcpiOsExecute: task queue not started
        random: harvesting attach, 8 bytes (4 bits) from apic0
        random: harvesting attach, 8 bytes (4 bits) from nexus0
        pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
        pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
        pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
        pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xc0000-0xce7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xce800-0xcefff) for rid 1 of orm0
        pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xcf800-0xcffff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
        pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
        pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
        pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
        pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
        pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe0000-0xe07ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe0800-0xe0fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe1800-0xe1fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe2000-0xe27ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe2800-0xe2fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe3000-0xe37ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe3800-0xe3fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe4000-0xe47ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe4800-0xe4fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe5000-0xe57ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe5800-0xe5fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe6000-0xe67ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe6800-0xe6fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe7000-0xe77ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe7800-0xe7fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe8000-0xe87ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe8800-0xe8fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe9000-0xe97ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xe9800-0xe9fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xea000-0xea7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xea800-0xeafff) for rid 1 of orm0
        pcib0: allocated type 3 (0xeb000-0xeb7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xeb800-0xebfff) for rid 1 of orm0
        pcib0: allocated type 3 (0xec000-0xec7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xec800-0xecfff) for rid 1 of orm0
        pcib0: allocated type 3 (0xed000-0xed7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xed800-0xedfff) for rid 1 of orm0
        pcib0: allocated type 3 (0xee000-0xee7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xee800-0xeefff) for rid 1 of orm0
        pcib0: allocated type 3 (0xef000-0xef7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xef800-0xeffff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf0000-0xf07ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf0800-0xf0fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf1000-0xf17ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf1800-0xf1fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf2000-0xf27ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf2800-0xf2fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf3000-0xf37ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf3800-0xf3fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf4000-0xf47ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf4800-0xf4fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf5000-0xf57ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf5800-0xf5fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf6000-0xf67ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf6800-0xf6fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf7000-0xf77ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf7800-0xf7fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf8000-0xf87ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf8800-0xf8fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf9000-0xf97ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xf9800-0xf9fff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfa000-0xfa7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfa800-0xfafff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfb000-0xfb7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfb800-0xfbfff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfc000-0xfc7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfc800-0xfcfff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfd000-0xfd7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfd800-0xfdfff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfe000-0xfe7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xfe800-0xfefff) for rid 1 of orm0
        pcib0: allocated type 3 (0xff000-0xff7ff) for rid 1 of orm0
        pcib0: allocated type 3 (0xff800-0xfffff) for rid 1 of orm0
        ahc_isa_identify 0: ioport 0xc00 alloc failed
        ahc_isa_identify 1: ioport 0x1c00 alloc failed
        ahc_isa_identify 2: ioport 0x2c00 alloc failed
        ahc_isa_identify 3: ioport 0x3c00 alloc failed
        ahc_isa_identify 4: ioport 0x4c00 alloc failed
        ahc_isa_identify 5: ioport 0x5c00 alloc failed
        ahc_isa_identify 6: ioport 0x6c00 alloc failed
        ahc_isa_identify 7: ioport 0x7c00 alloc failed
        ahc_isa_identify 8: ioport 0x8c00 alloc failed
        ahc_isa_identify 9: ioport 0x9c00 alloc failed
        ahc_isa_identify 10: ioport 0xac00 alloc failed
        ahc_isa_identify 11: ioport 0xbc00 alloc failed
        ahc_isa_identify 12: ioport 0xcc00 alloc failed
        ahc_isa_identify 13: ioport 0xdc00 alloc failed
        ahc_isa_identify 14: ioport 0xec00 alloc failed
        isa_probe_children: disabling PnP devices
        atrtc: atrtc0 already exists; skipping it
        attimer: attimer0 already exists; skipping it
        sc: sc0 already exists; skipping it
        isa_probe_children: probing non-PnP devices
        orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
        random: harvesting attach, 8 bytes (4 bits) from orm0
        sc0 failed to probe on isa0
        vga0 failed to probe on isa0
        pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
        pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
        atkbdc0: AT keyboard controller not found
        atkbdc0 failed to probe at port 0x60,0x64 on isa0
        pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
        pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
        fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
        ppc0: cannot reserve I/O port range
        ppc0 failed to probe at irq 7 on isa0
        pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0
        uart0 failed to probe at port 0x3f8 irq 4 on isa0
        pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
        uart1 failed to probe at port 0x2f8 irq 3 on isa0
        isa_probe_children: probing PnP devices
        AcpiOsExecute: task queue not started
        random: harvesting attach, 8 bytes (4 bits) from acpi_perf0
        AcpiOsExecute: task queue not started
        random: harvesting attach, 8 bytes (4 bits) from acpi_perf1
        AcpiOsExecute: task queue not started
        random: harvesting attach, 8 bytes (4 bits) from acpi_perf2
        AcpiOsExecute: task queue not started
        random: harvesting attach, 8 bytes (4 bits) from acpi_perf3
        est0: <Enhanced SpeedStep Frequency Control> on cpu0
        random: harvesting attach, 8 bytes (4 bits) from cpufreq0
        random: harvesting attach, 8 bytes (4 bits) from est0
        est1: <Enhanced SpeedStep Frequency Control> on cpu1
        random: harvesting attach, 8 bytes (4 bits) from cpufreq1
        random: harvesting attach, 8 bytes (4 bits) from est1
        est2: <Enhanced SpeedStep Frequency Control> on cpu2
        random: harvesting attach, 8 bytes (4 bits) from cpufreq2
        random: harvesting attach, 8 bytes (4 bits) from est2
        est3: <Enhanced SpeedStep Frequency Control> on cpu3
        random: harvesting attach, 8 bytes (4 bits) from cpufreq3
        random: harvesting attach, 8 bytes (4 bits) from est3
        Device configuration finished.
        procfs registered
        lapic: Divisor 2, Frequency 41667712 Hz
        lapic: deadline tsc mode, Frequency 2000049336 Hz
        Timecounters tick every 1.000 msec
        enc0: bpf attached
        lo0: bpf attached
        vlan: initialized, using hash tables with chaining
        tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768
        IPsec: Initialized Security Association Processing.
        pfsync0: bpf attached
        pflog0: bpf attached
        AcpiOsExecute: enqueue 5 pending tasks
        hpt27xx: no controller detected.
        hptnr: no controller detected.
        hptrr: no controller detected.
        ahcich0: AHCI reset...
        ahcich0: SATA connect time=100us status=00000123
        ahcich0: AHCI reset: device found
        ahcich0: AHCI reset: device ready after 0ms
        ugen0.1: <Intel EHCI root HUB> at usbus0
        uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
        uhub0: 8 ports with 8 removable, self powered
        random: harvesting attach, 8 bytes (4 bits) from uhub0
        ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0
        uhub1 on uhub0
        uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0
        uhub1: 4 ports with 4 removable, self powered
        random: harvesting attach, 8 bytes (4 bits) from uhub1
        ugen0.3: <vendor 0x0bda product 0x8189> at usbus0
        urtw0 on uhub1
        urtw0: <vendor 0x0bda product 0x8189, class 0/0, rev 2.00/2.00, addr 3> on usbus0
        urtw0: rtl8187b rf rtl8225z2 hwrev e
        urtw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
        urtw0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
        random: harvesting attach, 8 bytes (4 bits) from urtw0
        ugen0.4: <vendor 0x0566 product 0x3107> at usbus0
        ukbd0 on uhub1
        ukbd0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0
        kbd: new array size 4
        kbd1 at ukbd0
        kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
        random: harvesting attach, 8 bytes (4 bits) from ukbd0
        uhid0 on uhub1
        uhid0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0
        random: harvesting attach, 8 bytes (4 bits) from uhid0
        pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
        pass0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device
        pass0: Serial Number 1611143330
        pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
        pass0: Command Queueing enabled
        ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
        GEOM: new disk ada0
        ada0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device
        ada0: Serial Number 1611143330
        ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
        ada0: Command Queueing enabled
        ada0: 30533MB (62533296 512 byte sectors)
        Trying to mount root from ufs:/dev/gptid/b3b3ce75-9d81-11e8-a6f3-007121aa43a4 [rw]...
        atrtc0: providing initial system time
        start_init: trying /sbin/init
        random: unblocking device.
        cpuctl: access to MSR registers/cpuid info.
        CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
          Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
          Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
          Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
          AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
          AMD Features2=0x101<LAHF,Prefetch>
          Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
          VT-x: (disabled in BIOS) Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
                Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
                Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
                Secondary Processor Controls=0x28ef<APIC,EPT,DT,RDTSCP,VPID,WBINVD,UG,RDRAND,VMFUNC>
                Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
                Entry Controls=0xda0400
                EPT Features=0x6114141<XO,PW4,UC,WB,2M,INVEPT,single,all>
                VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
          TSC: P-state invariant, performance statistics
        DTLB: 4k pages, fully associative, 32 entries
        Data TLB: 4 KB Pages, 4-way set associative, 128 entries
        Instruction TLB: 4 KByte pages, fully associative, 48 entries
        DTLB: 4 KByte/2 MByte pages, 4-way associative, 16 entries
        L2 cache: 1024 kbytes, 16-way associative, 64 bytes/line
        
        1 Reply Last reply Reply Quote 0
        • jimpJ
          jimp Rebel Alliance Developer Netgate
          last edited by

          The error messages there all still seem to point toward the same resolutions when searching. The things you've already tried, or something in the BIOS not allocating resources properly.

          You could try disabling MSI-X (hw.em.enable_msix=0 in /boot/loader.conf.local then reboot), but I'd still be on the lookout for a BIOS update or a BIOS option that might be related.

          Remember: Upvote with the ๐Ÿ‘ button for any user/post you find to be helpful, informative, or deserving of recognition!

          Need help fast? Netgate Global Support!

          Do not Chat/PM for help!

          1 Reply Last reply Reply Quote 0
          • N
            nrw
            last edited by

            When you said "PCI bus resource options", its means something like that?
            0_1538058210134_2018-09-27 17-15-54.JPG

            1 Reply Last reply Reply Quote 0
            • jimpJ
              jimp Rebel Alliance Developer Netgate
              last edited by

              Yes, like that, but not being familiar with your hardware I can't offer any suggestions there. You may need to try a few changes up or down to see if you can get an improvement. Judging by the device info in pciconf it's on bus 0, so try that first.

              Note what the initial values are and you can always change it back.

              Remember: Upvote with the ๐Ÿ‘ button for any user/post you find to be helpful, informative, or deserving of recognition!

              Need help fast? Netgate Global Support!

              Do not Chat/PM for help!

              1 Reply Last reply Reply Quote 0
              • N
                nrw
                last edited by nrw

                I tried to play with BIOS option, but my maximum achievement is halt pfsense on boot. Big question: why em3 worked on previous pfsense version? Maybe it not hardware issue?

                1 Reply Last reply Reply Quote 0
                • jimpJ
                  jimp Rebel Alliance Developer Netgate
                  last edited by

                  There are a number of OS/driver changes in FreeBSD 11.2 (pfSense 2.4.4) vs 11.1 (pfSense 2.4.3). It's entirely possible some driver change had a regression for your specific card. It may also be trying a newer/faster mode that it didn't do before, or support for some other piece of conflicting hardware was added that wasn't actively in use before.

                  Remember: Upvote with the ๐Ÿ‘ button for any user/post you find to be helpful, informative, or deserving of recognition!

                  Need help fast? Netgate Global Support!

                  Do not Chat/PM for help!

                  1 Reply Last reply Reply Quote 0
                  • KOMK
                    KOM
                    last edited by

                    'Reseved Memory'? 'Reseved Memory Alignment'? At least they managed to get it right the third time. First thing I'd check, as Jim already said, was for a BIOS update for that board.

                    1 Reply Last reply Reply Quote 0
                    • jimpJ
                      jimp Rebel Alliance Developer Netgate
                      last edited by jimp

                      You might want to look at https://forum.netgate.com/post/792753 -- a poster there suggested using an alternate video console.

                      So REMOVE this from /boot/loader.conf.local:

                      i915kms_load="YES"
                      drm.i915.enable_unsupported=1
                      

                      And then add this to /boot/loader.conf.local:

                      kern.vty=sc
                      

                      That may have a similar effect to disabling AGP on older hardware, freeing up enough bus resources for the additional NIC to function.

                      Remember: Upvote with the ๐Ÿ‘ button for any user/post you find to be helpful, informative, or deserving of recognition!

                      Need help fast? Netgate Global Support!

                      Do not Chat/PM for help!

                      1 Reply Last reply Reply Quote 0
                      • N
                        nrw
                        last edited by

                        "kern.vty=sc" bring back em3, yes!
                        But now video stop working after this line:
                        masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000

                        var/log/dmesq.boot:

                        Copyright (c) 1992-2018 The FreeBSD Project.
                        Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                        	The Regents of the University of California. All rights reserved.
                        FreeBSD is a registered trademark of The FreeBSD Foundation.
                        FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0a3(RELENG_2_4_4): Thu Sep 20 09:04:45 EDT 2018
                            root@buildbot3:/crossbuild/ce-244/obj/amd64/WvDslnYb/crossbuild/ce-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
                        FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
                        CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
                          Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
                          Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                          Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
                          AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
                          AMD Features2=0x101<LAHF,Prefetch>
                          Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
                          VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                          TSC: P-state invariant, performance statistics
                        real memory  = 4294967296 (4096 MB)
                        avail memory = 3979714560 (3795 MB)
                        Event timer "LAPIC" quality 600
                        ACPI APIC Table: <ALASKA A M I >
                        WARNING: L1 data cache covers less APIC IDs than a core
                        0 < 1
                        FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                        FreeBSD/SMP: 1 package(s) x 4 core(s)
                        Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748)
                        ioapic0 <Version 2.0> irqs 0-86 on motherboard
                        SMP: AP CPU #3 Launched!
                        SMP: AP CPU #1 Launched!
                        SMP: AP CPU #2 Launched!
                        Timecounter "TSC" frequency 2000049576 Hz quality 1000
                        random: entropy device external interface
                        wlan: mac acl policy registered
                        hn: tranparent VF mode, if_transmit will be used, instead of if_start
                        kbd0 at kbdmux0
                        netmap: loaded module
                        module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19
                        random: registering fast source Intel Secure Key RNG
                        random: fast provider: "Intel Secure Key RNG"
                        nexus0
                        cryptosoft0: <software crypto> on motherboard
                        padlock0: No ACE support.
                        acpi0: <ALASKA A M I > on motherboard
                        acpi0: Power Button (fixed)
                        unknown: I/O range not supported
                        cpu0: <ACPI CPU> on acpi0
                        cpu1: <ACPI CPU> on acpi0
                        cpu2: <ACPI CPU> on acpi0
                        cpu3: <ACPI CPU> on acpi0
                        atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
                        atrtc0: Warning: Couldn't map I/O.
                        atrtc0: registered as a time-of-day clock, resolution 1.000000s
                        Event timer "RTC" frequency 32768 Hz quality 0
                        hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
                        Timecounter "HPET" frequency 14318180 Hz quality 950
                        Event timer "HPET" frequency 14318180 Hz quality 450
                        Event timer "HPET1" frequency 14318180 Hz quality 440
                        Event timer "HPET2" frequency 14318180 Hz quality 440
                        attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
                        Timecounter "i8254" frequency 1193182 Hz quality 0
                        Event timer "i8254" frequency 1193182 Hz quality 100
                        Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
                        acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
                        pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
                        pcib0: _OSC returned error 0x10
                        pci0: <ACPI PCI bus> on pcib0
                        vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
                        vgapci0: Boot video device
                        ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a02000-0xd0a027ff irq 19 at device 19.0 on pci0
                        ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
                        ahcich0: <AHCI channel> at channel 0 on ahci0
                        pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
                        pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
                        pcib1: [GIANT-LOCKED]
                        pci1: <ACPI PCI bus> on pcib1
                        em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
                        em0: Using an MSI interrupt
                        em0: Ethernet address: 00:71:21:aa:43:a4
                        em0: netmap queues/slots: TX 1/1024, RX 1/1024
                        pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
                        pcib2: [GIANT-LOCKED]
                        pci2: <ACPI PCI bus> on pcib2
                        em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
                        em1: Using an MSI interrupt
                        em1: Ethernet address: 00:71:21:aa:43:a5
                        em1: netmap queues/slots: TX 1/1024, RX 1/1024
                        pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
                        pcib3: [GIANT-LOCKED]
                        pci3: <ACPI PCI bus> on pcib3
                        em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
                        em2: Using an MSI interrupt
                        em2: Ethernet address: 00:71:21:aa:43:a6
                        em2: netmap queues/slots: TX 1/1024, RX 1/1024
                        pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
                        pcib4: [GIANT-LOCKED]
                        pci4: <ACPI PCI bus> on pcib4
                        em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
                        em3: Using an MSI interrupt
                        em3: Ethernet address: 00:71:21:aa:43:a7
                        em3: netmap queues/slots: TX 1/1024, RX 1/1024
                        ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a01000-0xd0a013ff irq 23 at device 29.0 on pci0
                        usbus0: EHCI version 1.0
                        usbus0 on ehci0
                        usbus0: 480Mbps High Speed USB v2.0
                        isab0: <PCI-ISA bridge> at device 31.0 on pci0
                        isa0: <ISA bus> on isab0
                        acpi_button0: <Sleep Button> on acpi0
                        orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
                        ppc0: cannot reserve I/O port range
                        est0: <Enhanced SpeedStep Frequency Control> on cpu0
                        est1: <Enhanced SpeedStep Frequency Control> on cpu1
                        est2: <Enhanced SpeedStep Frequency Control> on cpu2
                        est3: <Enhanced SpeedStep Frequency Control> on cpu3
                        Timecounters tick every 1.000 msec
                        ugen0.1: <Intel EHCI root HUB> at usbus0
                        uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
                        uhub0: 8 ports with 8 removable, self powered
                        ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0
                        uhub1 on uhub0
                        uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0
                        uhub1: 4 ports with 4 removable, self powered
                        ugen0.3: <vendor 0x0bda product 0x8189> at usbus0
                        urtw0 on uhub1
                        urtw0: <vendor 0x0bda product 0x8189, class 0/0, rev 2.00/2.00, addr 3> on usbus0
                        urtw0: rtl8187b rf rtl8225z2 hwrev e
                        ugen0.4: <vendor 0x0566 product 0x3107> at usbus0
                        ukbd0 on uhub1
                        ukbd0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0
                        kbd1 at ukbd0
                        uhid0 on uhub1
                        uhid0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0
                        ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
                        ada0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device
                        ada0: Serial Number 1611143330
                        ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
                        ada0: Command Queueing enabled
                        ada0: 30533MB (62533296 512 byte sectors)
                        Trying to mount root from ufs:/dev/gptid/b3b3ce75-9d81-11e8-a6f3-007121aa43a4 [rw]...
                        random: unblocking device.
                        CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
                          Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
                          Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
                          Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
                          AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
                          AMD Features2=0x101<LAHF,Prefetch>
                          Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
                          VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
                          TSC: P-state invariant, performance statistics
                        
                        1 Reply Last reply Reply Quote 0
                        • N
                          nrw
                          last edited by nrw

                          From upgrade guide:

                          Systems with similar console problems not containing a graphics chip supported by the i915 driver 
                          may need to reinstall 2.4.4 to use a UEFI console
                          

                          Can it help in theory?

                          1 Reply Last reply Reply Quote 0
                          • N
                            nrw
                            last edited by

                            I'm an idiot ๐Ÿคข Decided to add parameters (i915kms_load="YES", ...) to /boot/loader.conf.local in advance, instead of checking the functionality without them. After deleting /boot/loader.conf.local, everything was OK. Excuse for troubling.

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.