Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard Firebox M440

    Hardware
    6
    137
    25.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Setting up a port forward? Sure: https://www.netgate.com/docs/pfsense/book/nat/port-forwards.html

      If the m440 is using only the igb NIC and it's the LAN it might need it's default route setting to your upstream pfSense in order to reply though.

      Steve

      1 Reply Last reply Reply Quote 0
      • P
        pglover19
        last edited by

        The M440 will have a default address of 192.168.1.1 on the LAN interface which is a valid IP address on my network. I will be able to access the device from any computer on my network.

        So, can you provide details on how I would setup port forwarding in pfSense to allow you in?

        1 Reply Last reply Reply Quote 0
        • P
          pglover19
          last edited by

          Can you PM me your source IP address.

          1 Reply Last reply Reply Quote 0
          • P
            pglover19
            last edited by

            I got it.. Just need to restrict based on your IP address. I had to add some routing on the pfSense setup on the M440. It is working.

            1 Reply Last reply Reply Quote 0
            • P
              pglover19
              last edited by

              Were there any information in the WatchGuard OS boot log file that were useful?

              1 Reply Last reply Reply Quote 0
              • P
                pglover19
                last edited by

                Any update?

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Sorry, busy day. I'll update when I can.

                  1 Reply Last reply Reply Quote 0
                  • P
                    pglover19
                    last edited by

                    0_1540741535990_IMG_1466.jpg

                    1 Reply Last reply Reply Quote 0
                    • P
                      pglover19
                      last edited by

                      0_1540742959604_IMG_1469.jpg

                      1 Reply Last reply Reply Quote 0
                      • P
                        pglover19
                        last edited by

                        0_1540749284009_IMG_1472.jpg

                        0_1540749298477_IMG_1473.jpg

                        1 Reply Last reply Reply Quote 0
                        • P
                          pglover19
                          last edited by

                          0_1540759769872_CaptureJ5.JPG

                          1 Reply Last reply Reply Quote 0
                          • P
                            pglover19
                            last edited by

                            0_1541254965637_Capture200.JPG

                            1 Reply Last reply Reply Quote 0
                            • A
                              apocalyps3736
                              last edited by stephenw10

                              I had the same issue with the 24 ports not working on pfsense. This is from the WG boot:

                              99.449275] Intel(R) Gigabit Ethernet Network Driver - version 5.2.15
[   99.769656] [   99.456467] Copyright (c) 2007-2014 Intel Corporation.
Running /etc/run[   99.463239] igb_sw_init: sw0
 Max Frame 1526
[   99.829545] igb 0000:00:14.0: added PHC on eth0
[   99.834127] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection
[   99.841038] igb 0000:00:14.0: eth0: (PCIe:integrated:integrated)
[   99.847172] igb 0000:00:14.0 eth0: MAC: 00:a0:c9:00:00:00
[   99.852680] igb 0000:00:14.0: eth0: PBA No: 001800-000
[   99.857964] igb 0000:00:14.0: LRO is disabled
[   99.862358] igb 0000:00:14.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[   99.870190] igb_sw_init: sw1 Max Frame 1526
[  100.235046] igb 0000:00:14.1: added PHC on eth1
[  100.239636] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection
[  100.246548] igb 0000:00:14.1: eth1: (PCIe:integrated:integrated)
[  100.252679] igb 0000:00:14.1 eth1: MAC: 00:a0:c9:00:00:01
[  100.258191] igb 0000:00:14.1: eth1: PBA No: 001800-000
[  100.263472] igb 0000:00:14.1: LRO is disabled
[  100.267873] igb 0000:00:14.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[  100.275729] igb_sw_init: sw2 Max Frame 1526
[  100.640167] igb 0000:00:14.2: added PHC on eth2
[  100.644739] igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection
[  100.651652] igb 0000:00:14.2: eth2: (PCIe:integrated:integrated)
[  100.657782] igb 0000:00:14.2 eth2: MAC: 00:a0:c9:00:00:02
[  100.663301] igb 0000:00:14.2: eth2: PBA No: 001800-000
[  100.668591] igb 0000:00:14.2: LRO is disabled
[  100.672986] igb 0000:00:14.2: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[  100.680813] igb_sw_init: sw3 Max Frame 1526
[  101.043999] igb 0000:00:14.3: added PHC on eth3
[  101.048577] igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection
[  101.055512] igb 0000:00:14.3: eth3: (PCIe:integrated:integrated)
[  101.061679] igb 0000:00:14.3 eth3: MAC: 00:a0:c9:00:00:03
[  101.067196] igb 0000:00:14.3: eth3: PBA No: 001800-000
[  101.072482] igb 0000:00:14.3: LRO is disabled
[  101.076873] igb 0000:00:14.3: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[  101.144488] igb 0000:01:00.0: added PHC on eth4
[  101.149078] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[  101.156009] igb 0000:01:00.0: eth4: (PCIe:2.5GT/s:Width x1)
[  101.161708] igb 0000:01:00.0 eth4: MAC: 00:90:7f:d0:44:27
[  101.167189] igb 0000:01:00.0: eth4: PBA No: 000300-000
[  101.172397] igb 0000:01:00.0: LRO is disabled
[  101.176791] igb 0000:01:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[  101.186125] Intel(R) 10 Gigabit PCI Express Network Driver - version 4.1.5
[  101.193037] Copyright (c) 1999-2015 Intel Corporation.
[  102.359529] ixgbe 0000:03:00.0: PCI Express bandwidth of 32GT/s available
[  102.366384] ixgbe 0000:03:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[  102.373630] ixgbe 0000:03:00.0 eth5: MAC: 2, PHY: 1, PBA No: FFFFFF-0FF
[  102.380309] ixgbe 0000:03:00.0: 00:90:7f:d0:44:40
[  102.385089] ixgbe 0000:03:00.0 eth5: Enabled Features: RxQ: 8 TxQ: 8 FdirHash RSC
[  102.392750] ixgbe 0000:03:00.0 eth5: Intel(R) 10 Gigabit Network Connection
[  103.568275] ixgbe 0000:03:00.1: PCI Express bandwidth of 32GT/s available
[  103.575119] ixgbe 0000:03:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[  103.582400] ixgbe 0000:03:00.1 eth6: MAC: 2, PHY: 1, PBA No: FFFFFF-0FF
[  103.589088] ixgbe 0000:03:00.1: 00:90:7f:d0:44:41
[  103.593857] ixgbe 0000:03:00.1 eth6: Enabled Features: RxQ: 8 TxQ: 8 FdirHash RSC
[  103.601491] ixgbe 0000:03:00.1 eth6: Intel(R) 10 Gigabit Network Connection
[  107.620905]
[  107.620905] PEX: Marvell device fixup
[  107.626199] Configuring cross bar for xCat2 device 0xe7fe
[  107.637923]
[  107.640321] stub function bspPciFindDevReset returning MV_OK
[  107.652822]
[  107.652822] presteraSmi_init: Init OK!
[  107.658284] DMA - dma_area: 0xffffc9000d580000(v) ,dma_base: 0x80000000(p), dma_len: 0x200000
[  107.667629] HSU - hsu_area: 0xffffc9000d800000(v) ,hsu_base: 0x88000000(p), hsu_len: 0x800000
[  107.676642]
[  107.676642] wg_pss_init: Built Oct 17 2016 17:54:50
[  107.683072] pss_create:  eth0    ->   sw0
[  107.704448] pss_create:  eth1    ->   sw1
[  107.737763] pss_create:  eth2    ->   sw2
[  107.774455] pss_create:  eth3    ->   sw3
[  107.804477] pss_create:  eth4    ->   eth0
[  107.834500] pss_create:  eth5    ->   eth25
[  107.871198] pss_create:  eth6    ->   eth26
[  107.901833] pss_create:  eth1   [ 9]  sw0    tag 4064
[  107.907367] pss_create:  eth2   [10]  sw1    tag 4065
[  107.912905] pss_create:  eth3   [11]  sw2    tag 4066
[  107.918452] pss_create:  eth4   [12]  sw3    tag 4067
[  107.923973] pss_create:  eth5   [13]  sw0    tag 4068
[  107.929497] pss_create:  eth6   [14]  sw1    tag 4069
[  107.935028] pss_create:  eth7   [15]  sw2    tag 4070
[  107.940572] pss_create:  eth8   [16]  sw3    tag 4071
[  107.946104] pss_create:  eth9   [17]  sw0    tag 4072
[  107.951637] pss_create:  eth10  [18]  sw1    tag 4073
[  107.957199] pss_create:  eth11  [19]  sw2    tag 4074
[  107.962739] pss_create:  eth12  [20]  sw3    tag 4075
[  107.968302] pss_create:  eth13  [21]  sw0    tag 4076
[  107.973851] pss_create:  eth14  [22]  sw1    tag 4077
[  107.979379] pss_create:  eth15  [23]  sw2    tag 4078
[  107.984912] pss_create:  eth16  [24]  sw3    tag 4079
[  107.990457] pss_create:  eth17  [25]  sw0    tag 4080
[  107.996015] pss_create:  eth18  [26]  sw1    tag 4081
[  108.001548] pss_create:  eth19  [27]  sw2    tag 4082
[  108.007063] pss_create:  eth20  [28]  sw3    tag 4083
[  108.012600] pss_create:  eth21  [29]  sw0    tag 4084
[  108.018141] pss_create:  eth22  [30]  sw1    tag 4085
[  108.023685] pss_create:  eth23  [31]  sw2    tag 4086
[  108.029240] pss_create:  eth24  [32]  sw3    tag 4087

                              As you can see watchguard uses a custom lib libwg_pss and some others to make this happen. I'm now trying to use the WG kernel and libs to create a linux distro where all the ports are accessible.

                              1 Reply Last reply Reply Quote 0
                              • P
                                pglover19
                                last edited by

                                I have 2 of these units. It would be great to get the units working with pfSense. Let me know what help you need from me.

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  More eyes on this can't hurt. 😉

                                  Indeed WG loads a driver for the switch device and then configure it to accept the individual VLANs on the three igb NICs.

                                  It would be good to get a second opinion on connecting the switch serial console header internally if you can try that.
                                  If we can get any access to the switch that might help. It seem unlikely we would ever get a FreeBSD driver for the switch devise but if we can configure it via serial then we would only need an igb driver that recognises the phy (or lack thereof).

                                  Steve

                                  J 1 Reply Last reply Reply Quote 0
                                  • P
                                    pglover19
                                    last edited by

                                    Hi Stephen,

                                    I just purchased a third M440 on Ebay for a cheap price. I know we worked on trying to get pfSense to recognize all the 1GB ports on this unit last year and were unsuccessful.

                                    I'm willing to donate the third M440 to you if you would like to continue the effort to get this unit working with pfSense. I can ship the unit to you. Let me know what you think.

                                    1 Reply Last reply Reply Quote 0
                                    • J
                                      jrhymer @stephenw10
                                      last edited by

                                      @stephenw10 Stephen I would be willing to donate one of these units as well

                                      I 1 Reply Last reply Reply Quote 0
                                      • I
                                        i_am_a_Fred @jrhymer
                                        last edited by

                                        @jrhymer
                                        Hi, i can access to WebUI or proprietary interface (via WSM), can this help ?
                                        Regards.

                                        Fred.

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          In the Watchguard OS? I doubt it would tell us much. The boot logs, which we already have, are quite revealing.

                                          Steve

                                          S 1 Reply Last reply Reply Quote 1
                                          • S
                                            sevrix @stephenw10
                                            last edited by

                                            @stephenw10 Hello, I'm really invested in this as well but I have gotten nowhere, I know lots been a few years but I'm guessing there is no update on this? I'm based in UK/London I have a m440 and gotten nowhere with pfsense

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post