Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard Firebox M440

    Hardware
    6
    137
    25.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      pglover19
      last edited by

      If I get teamviewer setup tonight, will you be able remote into my system tonight?

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Yes, but SSH to the device would be better if you can.

        Steve

        1 Reply Last reply Reply Quote 0
        • P
          pglover19
          last edited by

          Once you go in via teamviewer, the M440 device will be on the network and we can use Putty to establish a SSH session to the device.

          Do you have a simpler method?

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Just setup a port forward to ssh on it on some random high port. Restrict it to my source IP only?
            That's what I would do here. You have another pfSense box in front of it?

            Steve

            1 Reply Last reply Reply Quote 0
            • P
              pglover19
              last edited by

              Not sure how to do that. I will need to do some research to implement your suggestion.

              1 Reply Last reply Reply Quote 0
              • P
                pglover19
                last edited by

                Any instructions on how to set this up in pfSense?

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Setting up a port forward? Sure: https://www.netgate.com/docs/pfsense/book/nat/port-forwards.html

                  If the m440 is using only the igb NIC and it's the LAN it might need it's default route setting to your upstream pfSense in order to reply though.

                  Steve

                  1 Reply Last reply Reply Quote 0
                  • P
                    pglover19
                    last edited by

                    The M440 will have a default address of 192.168.1.1 on the LAN interface which is a valid IP address on my network. I will be able to access the device from any computer on my network.

                    So, can you provide details on how I would setup port forwarding in pfSense to allow you in?

                    1 Reply Last reply Reply Quote 0
                    • P
                      pglover19
                      last edited by

                      Can you PM me your source IP address.

                      1 Reply Last reply Reply Quote 0
                      • P
                        pglover19
                        last edited by

                        I got it.. Just need to restrict based on your IP address. I had to add some routing on the pfSense setup on the M440. It is working.

                        1 Reply Last reply Reply Quote 0
                        • P
                          pglover19
                          last edited by

                          Were there any information in the WatchGuard OS boot log file that were useful?

                          1 Reply Last reply Reply Quote 0
                          • P
                            pglover19
                            last edited by

                            Any update?

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Sorry, busy day. I'll update when I can.

                              1 Reply Last reply Reply Quote 0
                              • P
                                pglover19
                                last edited by

                                0_1540741535990_IMG_1466.jpg

                                1 Reply Last reply Reply Quote 0
                                • P
                                  pglover19
                                  last edited by

                                  0_1540742959604_IMG_1469.jpg

                                  1 Reply Last reply Reply Quote 0
                                  • P
                                    pglover19
                                    last edited by

                                    0_1540749284009_IMG_1472.jpg

                                    0_1540749298477_IMG_1473.jpg

                                    1 Reply Last reply Reply Quote 0
                                    • P
                                      pglover19
                                      last edited by

                                      0_1540759769872_CaptureJ5.JPG

                                      1 Reply Last reply Reply Quote 0
                                      • P
                                        pglover19
                                        last edited by

                                        0_1541254965637_Capture200.JPG

                                        1 Reply Last reply Reply Quote 0
                                        • A
                                          apocalyps3736
                                          last edited by stephenw10

                                          I had the same issue with the 24 ports not working on pfsense. This is from the WG boot:

                                          99.449275] Intel(R) Gigabit Ethernet Network Driver - version 5.2.15
[   99.769656] [   99.456467] Copyright (c) 2007-2014 Intel Corporation.
Running /etc/run[   99.463239] igb_sw_init: sw0
 Max Frame 1526
[   99.829545] igb 0000:00:14.0: added PHC on eth0
[   99.834127] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection
[   99.841038] igb 0000:00:14.0: eth0: (PCIe:integrated:integrated)
[   99.847172] igb 0000:00:14.0 eth0: MAC: 00:a0:c9:00:00:00
[   99.852680] igb 0000:00:14.0: eth0: PBA No: 001800-000
[   99.857964] igb 0000:00:14.0: LRO is disabled
[   99.862358] igb 0000:00:14.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[   99.870190] igb_sw_init: sw1 Max Frame 1526
[  100.235046] igb 0000:00:14.1: added PHC on eth1
[  100.239636] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection
[  100.246548] igb 0000:00:14.1: eth1: (PCIe:integrated:integrated)
[  100.252679] igb 0000:00:14.1 eth1: MAC: 00:a0:c9:00:00:01
[  100.258191] igb 0000:00:14.1: eth1: PBA No: 001800-000
[  100.263472] igb 0000:00:14.1: LRO is disabled
[  100.267873] igb 0000:00:14.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[  100.275729] igb_sw_init: sw2 Max Frame 1526
[  100.640167] igb 0000:00:14.2: added PHC on eth2
[  100.644739] igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection
[  100.651652] igb 0000:00:14.2: eth2: (PCIe:integrated:integrated)
[  100.657782] igb 0000:00:14.2 eth2: MAC: 00:a0:c9:00:00:02
[  100.663301] igb 0000:00:14.2: eth2: PBA No: 001800-000
[  100.668591] igb 0000:00:14.2: LRO is disabled
[  100.672986] igb 0000:00:14.2: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[  100.680813] igb_sw_init: sw3 Max Frame 1526
[  101.043999] igb 0000:00:14.3: added PHC on eth3
[  101.048577] igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection
[  101.055512] igb 0000:00:14.3: eth3: (PCIe:integrated:integrated)
[  101.061679] igb 0000:00:14.3 eth3: MAC: 00:a0:c9:00:00:03
[  101.067196] igb 0000:00:14.3: eth3: PBA No: 001800-000
[  101.072482] igb 0000:00:14.3: LRO is disabled
[  101.076873] igb 0000:00:14.3: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[  101.144488] igb 0000:01:00.0: added PHC on eth4
[  101.149078] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[  101.156009] igb 0000:01:00.0: eth4: (PCIe:2.5GT/s:Width x1)
[  101.161708] igb 0000:01:00.0 eth4: MAC: 00:90:7f:d0:44:27
[  101.167189] igb 0000:01:00.0: eth4: PBA No: 000300-000
[  101.172397] igb 0000:01:00.0: LRO is disabled
[  101.176791] igb 0000:01:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[  101.186125] Intel(R) 10 Gigabit PCI Express Network Driver - version 4.1.5
[  101.193037] Copyright (c) 1999-2015 Intel Corporation.
[  102.359529] ixgbe 0000:03:00.0: PCI Express bandwidth of 32GT/s available
[  102.366384] ixgbe 0000:03:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[  102.373630] ixgbe 0000:03:00.0 eth5: MAC: 2, PHY: 1, PBA No: FFFFFF-0FF
[  102.380309] ixgbe 0000:03:00.0: 00:90:7f:d0:44:40
[  102.385089] ixgbe 0000:03:00.0 eth5: Enabled Features: RxQ: 8 TxQ: 8 FdirHash RSC
[  102.392750] ixgbe 0000:03:00.0 eth5: Intel(R) 10 Gigabit Network Connection
[  103.568275] ixgbe 0000:03:00.1: PCI Express bandwidth of 32GT/s available
[  103.575119] ixgbe 0000:03:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[  103.582400] ixgbe 0000:03:00.1 eth6: MAC: 2, PHY: 1, PBA No: FFFFFF-0FF
[  103.589088] ixgbe 0000:03:00.1: 00:90:7f:d0:44:41
[  103.593857] ixgbe 0000:03:00.1 eth6: Enabled Features: RxQ: 8 TxQ: 8 FdirHash RSC
[  103.601491] ixgbe 0000:03:00.1 eth6: Intel(R) 10 Gigabit Network Connection
[  107.620905]
[  107.620905] PEX: Marvell device fixup
[  107.626199] Configuring cross bar for xCat2 device 0xe7fe
[  107.637923]
[  107.640321] stub function bspPciFindDevReset returning MV_OK
[  107.652822]
[  107.652822] presteraSmi_init: Init OK!
[  107.658284] DMA - dma_area: 0xffffc9000d580000(v) ,dma_base: 0x80000000(p), dma_len: 0x200000
[  107.667629] HSU - hsu_area: 0xffffc9000d800000(v) ,hsu_base: 0x88000000(p), hsu_len: 0x800000
[  107.676642]
[  107.676642] wg_pss_init: Built Oct 17 2016 17:54:50
[  107.683072] pss_create:  eth0    ->   sw0
[  107.704448] pss_create:  eth1    ->   sw1
[  107.737763] pss_create:  eth2    ->   sw2
[  107.774455] pss_create:  eth3    ->   sw3
[  107.804477] pss_create:  eth4    ->   eth0
[  107.834500] pss_create:  eth5    ->   eth25
[  107.871198] pss_create:  eth6    ->   eth26
[  107.901833] pss_create:  eth1   [ 9]  sw0    tag 4064
[  107.907367] pss_create:  eth2   [10]  sw1    tag 4065
[  107.912905] pss_create:  eth3   [11]  sw2    tag 4066
[  107.918452] pss_create:  eth4   [12]  sw3    tag 4067
[  107.923973] pss_create:  eth5   [13]  sw0    tag 4068
[  107.929497] pss_create:  eth6   [14]  sw1    tag 4069
[  107.935028] pss_create:  eth7   [15]  sw2    tag 4070
[  107.940572] pss_create:  eth8   [16]  sw3    tag 4071
[  107.946104] pss_create:  eth9   [17]  sw0    tag 4072
[  107.951637] pss_create:  eth10  [18]  sw1    tag 4073
[  107.957199] pss_create:  eth11  [19]  sw2    tag 4074
[  107.962739] pss_create:  eth12  [20]  sw3    tag 4075
[  107.968302] pss_create:  eth13  [21]  sw0    tag 4076
[  107.973851] pss_create:  eth14  [22]  sw1    tag 4077
[  107.979379] pss_create:  eth15  [23]  sw2    tag 4078
[  107.984912] pss_create:  eth16  [24]  sw3    tag 4079
[  107.990457] pss_create:  eth17  [25]  sw0    tag 4080
[  107.996015] pss_create:  eth18  [26]  sw1    tag 4081
[  108.001548] pss_create:  eth19  [27]  sw2    tag 4082
[  108.007063] pss_create:  eth20  [28]  sw3    tag 4083
[  108.012600] pss_create:  eth21  [29]  sw0    tag 4084
[  108.018141] pss_create:  eth22  [30]  sw1    tag 4085
[  108.023685] pss_create:  eth23  [31]  sw2    tag 4086
[  108.029240] pss_create:  eth24  [32]  sw3    tag 4087

                                          As you can see watchguard uses a custom lib libwg_pss and some others to make this happen. I'm now trying to use the WG kernel and libs to create a linux distro where all the ports are accessible.

                                          1 Reply Last reply Reply Quote 0
                                          • P
                                            pglover19
                                            last edited by

                                            I have 2 of these units. It would be great to get the units working with pfSense. Let me know what help you need from me.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post