Pfsense blocking Playstation network on my ps4 and 3 and other phone apps
-
@johnpoz there is one idea , but I need to see the result of packet capture and ifconfig
-
its DM400 its rubbish in modem router mode not too bad in modem mode
-
Yeah really need to see a packet capture.. 17.5kbps up is means there is something major wrong if your seeing 2mbps normally.
That is 115X different..
-
i will do it this even also can a anyone recommend a good modem only to buy?
i am grateful for all you help guys
-
What hardware are you running pfSense on? Or did I miss that somewhere?
-
For what kind of connection? You would really need to use something that is ok'd by your ISP to be honest.
I have my own cable modem - but it is listed on their compatibility list, while something for sure could work that supports the technology your ISP is using.. If not on their approved list, and something isn't working they will just say its the modem..
-
@davidserverguy2019 said in Pfsense blocking Playstation network on my ps4 and 3 and other phone apps:
Modem DM200
https://www.netgear.com/home/products/networking/dsl-modems-routers/DM200.aspx
-
You are on ADSL I assume with those speeds? Rather than VDSL(FTTC).
I used a Draytek V120 with Plusnet on ADSL very successfully for years. The V130 can also do VDSL if you ever upgrade to "fibre". I think I still have it here somewhere...
Otherwise the standard Openreach modems are great for VDSL and I believe they can also do ADSL though I've never tried that.
Steve
-
I am on fibre
-
Right that is just some of it the i have shared the link the the cap file lol be here all day other wise
https://www.dropbox.com/s/eqp5f7he50wd311/packetcapture.cap?dl=0
-
@konstanti here is a link to the ipconfig in note pad as it just gets flagged as spam on here
https://www.dropbox.com/s/bu9usrrvtrc0mmt/IPconfig.txt?dl=0
-
OK, system - advanced - network
Check disable hardware checksum offload
Save
Reboot -
I removed the posts with all the dump info in them - impossible to get any useful info off of those... The actual pcap file is what is needed which you linked too.
From a quick look.. why does .251 send so many RST.. Seems like a really shitty way to close off a conversation.. They seem to be after fin as well.. And then it has more conversations from the same source port?
Going to take a bit to try and go through this sniff... But its not really complete.. You really should have a sniff of when the ps4 turns on.. There are conversations that start was missed..
-
still same problem
-
@davidserverguy2019 show output ifconfig bge0 and
Ifconfig bge1 -
https://www.dropbox.com/s/7fort68kyjkikk5/IPconfig%20bge0.txt?dl=0
https://www.dropbox.com/s/qp7v83k7coxsqss/IPconfig%20bge1.txt?dl=0 -
@davidserverguy2019 OK, show, please, status/interfaces
-
@johnpoz New Capture below
https://www.dropbox.com/s/eqp5f7he50wd311/packetcapture.cap?dl=0 -
@konstanti here you go
https://www.dropbox.com/s/57a7sak8eb7xz24/20181230_102038.jpg?dl=0
-
Ok this is odd... So here is the ps4 talking to UPnP and getting your public IP... That gets answered..
But what is odd is why the retrans and dupack and out of order stuff.. This ps4 is wireless? Can you wire it?
There is a shit ton of RST from the ps4?? Seems ODD..
