Available Packages is empty in Package Manager
-
@kweetwel To avoid high CPU utilization and temperature first go to System -> Update -> Update settings and check "Disable the Dashboard auto-update check". Then reboot the firewall and pkg-static is not going to start. Remember to re-enable it when the repo problem is fixed.
-
@sotirone Thanks for the tip. Already did it. The only thing is, that the process still was restarting after I killed it. The temps are under control at the moment, so I'm a little less stressed. :)
-
We are running pfsense 2.4.4-RELEASE-p2, the same problem occurred today.
-
Same problem here on 2 boxes, since 1PM London time. Unacceptable if pfSense is being offered a commercial product under the Netgate brand.
-
It would be nice to hear a reply from pfsense about this problem.
Elvin
-
Disable the dashboard automatic update check, the process will disappear after some time (max ~1 hour). No reboot or anything is required.
I'm sure the Devs will fix this issue in future.
Shit happens sometimes...months ago I had some 30.000 € HP BTO Server dead on arrival.
-Rico
-
@emammadov said in Available Packages is empty in Package Manager:
It would be nice to hear a reply from pfsense about this problem.
https://twitter.com/NetgateUSA/status/1088455647807455232
-Rico
-
Thank you for your reply. But it would be also nice to see this kind of messages in the section of "Message from the pfSense team"".
-
This appears to have been resolved.
-
We are still experiencing this issue. I have checked "Dashboard check - Disable the Dashboard auto-update check". Maybe it is because of it?
-
It began to work now.
-
This post is deleted! -
This post is deleted! -
S stephenw10 locked this topic on
