Available Packages is empty in Package Manager
-
@sotirone
Yes -
@asv345h Just checked after my first comment, I now have two instances of pkg-static occupying two out of four cores at 100%. Total CPU usage around 55%, temps in the 70s (HP T620 thin client) and one-minute load average of 2.59.
-
I've had the same problem with pkg-static eating one core, after ~1 hour the process disappeared without reboot or anything, so just be patient.
But I disabled the dashboard update check in the Update Settings.-Rico
-
Do you know when it is going to be fixed?
-
This post is deleted! -
the same here !!
I have failed to perform an upgrade from 2.4.4_1 to 2.4.4_2... the box keeps stuck at initializing system update :/Any time estimation ?
-
DNS Serveur seem to be broken
set type=ANY
pkg.pfsense.org
Serveur : rooter.myrezo.priv
Address: 192.168.190.254pfsense.org
primary name server = ns1.netgate.com
responsible mail addr = admin.netgate.com
serial = 201608344
refresh = 3600 (1 hour)
retry = 7200 (2 hours)
expire = 1209600 (14 days)
default TTL = 3600 (1 hour)No SRV record avaible
ns1.netgate.com IS OUT no response
-
We are running pfsense 2.4.4-RELEASE-p2, everything was okay until now, this problem occurred today.
-
With my Qotom i5 firewall also a 100% CPU usage from pkg-static. I can't update the box.
I did a reinstall and then found this thread... :(PowerD is running the Minimum setting. On adaptive the CPU reached 90c. Now the temperature is around 50c
-
@kweetwel To avoid high CPU utilization and temperature first go to System -> Update -> Update settings and check "Disable the Dashboard auto-update check". Then reboot the firewall and pkg-static is not going to start. Remember to re-enable it when the repo problem is fixed.
-
@sotirone Thanks for the tip. Already did it. The only thing is, that the process still was restarting after I killed it. The temps are under control at the moment, so I'm a little less stressed. :)
-
We are running pfsense 2.4.4-RELEASE-p2, the same problem occurred today.
-
Same problem here on 2 boxes, since 1PM London time. Unacceptable if pfSense is being offered a commercial product under the Netgate brand.
-
It would be nice to hear a reply from pfsense about this problem.
Elvin
-
Disable the dashboard automatic update check, the process will disappear after some time (max ~1 hour). No reboot or anything is required.
I'm sure the Devs will fix this issue in future.
Shit happens sometimes...months ago I had some 30.000 € HP BTO Server dead on arrival.
-Rico
-
@emammadov said in Available Packages is empty in Package Manager:
It would be nice to hear a reply from pfsense about this problem.
https://twitter.com/NetgateUSA/status/1088455647807455232
-Rico
-
Thank you for your reply. But it would be also nice to see this kind of messages in the section of "Message from the pfSense team"".
-
This appears to have been resolved.
-
We are still experiencing this issue. I have checked "Dashboard check - Disable the Dashboard auto-update check". Maybe it is because of it?
-
It began to work now.
