HA XMLRPC error

[Derelict]

Yeah. Everything that was initially set up by the TCP handshake starting with a SYN going out has been blown away so...

[johnpoz]

Ok that makes sense then - thanks. Even though there is a rule that allows pfsense to talk out, it still needs a valid state.

[johnpoz]

So if they are seeing this block - how do they restart the sync process so there is a new state created? I really need to play more with the HA stuff.. Time to fire up some vms and play with the HA setup ;) My understanding of the inner works of that is very lacking - I just have not had need to play with it.

[Derelict]

@johnpoz It will kick off another sync when another change is made or there's a button in Status > Filter Reload (of all places).

[johnpoz]

hehe - that image just got better, I was thinking man derelict must be blind if has fonts/resolution set like that ;) Now it looks normal.. Before it was HUGE ;)

[Derelict]

@johnpoz It plays pretty nice in VMs. If you decide to lab it and have any questions just shout. Nothing special needed in proxmox.

[johnpoz]

But if the sync is having issues talking to the other side, wouldn't it auto send a new syn?

[Derelict]

@johnpoz I made a folder action that automatically downsizes screencaps from the 4K when they are taken. I have gotten lazy with Cmd-Option-Shift-4 (instead of Cmd-Shift-4) because it automatically sends the capture to the clipboard instead of the disk.

[Derelict]

@johnpoz said in HA XMLRPC error:

But if the sync is having issues talking to the other side, wouldn't it auto send a new syn?

A config sync is a one-time/as-needed event. If the connection fails it isn't retried - or maybe it is I don't know. Not really sure of why it is coded that way (if it is) and wouldn't understand it if I looked in there.

But that would not change those logged blocks or the logged XMLRPC message. It would just try again and succeed.

[johnpoz]

So you running 4k on your monitor? You Suck! ;) you have all the good toys!

[Derelict]

@johnpoz 5K iMac with a 4K on each side

[johnpoz]

Yeah you suck! ;) heheheh.. I finally updated main tv to 4k.. But upgrading my pc to do 4k with new monitor is cost prohibitive currently.. Damn budget committee (wife) can be a problem ;)

[bolvar]

@Derelict

Hy

Nothing changes made everything is on default values.

The problem now gone when i checked out the gateway monitoring.Now its a little bit like pfsense has a soul :D

[JeGr]

@Derelict said in HA XMLRPC error:

@johnpoz It will kick off another sync when another change is made or there's a button in Status > Filter Reload (of all places).

DAMN! Never even saw that/realized it is there. Important tidbit to add to my slides! :)

mutters to self: so many HA setups and never even saw that button... might be getting blind on my old days...

[Derelict]

Status (CARP) seems like a better place for that. There must be...reasons.

Yeah. It's there because it gives progress feedback using the same mechanism as a filter reload.

[JeGr]

@Derelict said in HA XMLRPC error:

Status (CARP) seems like a better place for that. There must be...reasons.

I'm sure ;) But ... what about bringing it to both places? I must say the filter reload screen is one of the last (and least) ones I was ever using and would have never searched for a HA related sync button there.

[Derelict]

They probably wouldn't want to duplicate that command output display code on another page but a link to the filter reload page there might be possible.

[bolvar]

Problem "solved".
I have monitoring on my wan gw and both on my core router.
I have disabled the monitoring on my wan gw and the error gone. So if you only have 1 public ip the gw monitoring should be off. Not the best solution but this workes only.