pfSense behind 4g router
-
Or it could be a remote access style
What can I use as other remote access style?
If the installation and configuration could be simple on the server side ...
My main wish is to not use a client to connect to my LAN. -
@Gérald said in pfSense behind 4g router:
I am on the private network of my access provider with a private IP and it is impossible for me to access my cameras and my home automation from the outside.
Don't you just love NAT?
This is just one reason we need to move to IPv6. NAT requires hacks upon hacks to get around the problems it causes.
-
You can use site-to-site or multi-client style setup. Both will work as long as you have the server end of the tunnel at the VPS and the client end behind the 4G router. That is required since the client initiates the connection to the server outbound.
Once the tunnel is up you can just access hosts on your LAN by port forwarding from the VPS end.
Steve
-
Thanks a lot for all these informations.
I will try that ... -
I come back to you after testing a lot of things.
I tested the reverse ssh and it works exactly as I described in my first post myPublicIP: myPort
I installed on my VPS a Debian distribution and I initiate a tunnel with the command: ssh -R remote_port: host: localport your_username @ IP address of the server.
Is it possible to do the same thing in pfSense? -
Yes: https://www.freebsd.org/cgi/man.cgi?query=ssh
But you should use a VPN for this really.
Steve
-
Thanks for this !!!
But no package for that ? -
For SSH? It's included by default, client and server.
-
Really !!!
And it's where ?? -
@Gérald said in pfSense behind 4g router:
Really !!!
And it's where ??SSH is built in to pfSense, or rather the FreeBSD it runs on. If you're running Linux, it's also built in, but you need something like Putty on Windows.
-
I know that SSH is integrated with freeBSD.
I use it this way to access my servers.
But it seems that there is no interface in pfSense to make SSH tunnel creation more user frendly -
@stephenw10 said in pfSense behind 4g router:
...you should use a VPN for this really.
But I'm not sure what you expect to see here for SSH. Once it's enabled in System > Advanced > Admin Access you can tunnel stuff to it or use it as a proxy, which I generally prefer.
Steve
-
@Gérald said in pfSense behind 4g router:
But it seems that there is no interface in pfSense to make SSH tunnel creation more user frendly
????
You don't need a tunnel for SSH. It's encrypted on it's own.
-
Looks like he's trying to setup this sort of tunnel:
https://www.ssh.com/ssh/tunneling/example#sec-Remote-Forwarding -
@stephenw10 said in pfSense behind 4g router:
Looks like he's trying to setup this sort of tunnel:
https://www.ssh.com/ssh/tunneling/example#sec-Remote-ForwardingThat's exactly it, as previously stated ...
-
Ok, so it's exactly the same as it would be for Debian. What do you expect to see in a 'package' for this?
Steve
-
Thanks for your interest !
I would like a package that would allow me to set up SSH tunnels quickly between my LAN and my VPS
To be able to control their states and an automatic reconnection (autossh) in case of disconnection. -
Hmm, I see. So maybe something like the port forward setup page but including configuring the actual SSH connections?
I've never seen anything like that offered on any firewall to be honest. Really this is exactly where you would usually just use a VPN. Is there some reason you don't want to use a VPN?
Steve
-
Wo not have to install clients on external devices
-
Well normally you would setup a site-to-site VPN and client can then connect across it directly. No need to install VPN clients on the hosts behind the firewall. Unless I'm missing something...