WireGuard in pfSense 2.5 Performance

Pippin

Glad to see Netgate shares these results in an honest way

dirtyfreebooter

The blog posts mentions setting MSS to 1380. Is that a Wireguard setting? Wireguard interface setting? Global pfSense setting? Thanks!

yon 0

@dirtyfreebooter

i will mtu setup 8920 mss may setup 1380 and 1360 ipv6

cmcdonald

@dirtyfreebooter If I understand the GUI correctly, then the value entered into the MSS field on the interface settings really should be the MTU value, and 40 bytes are substracted from the value in the MSS field to account for the TCP/IP header. So if you enter 1420 for both MTU and MSS, an MSS clamp of 1420-40=1380 will be applied. This doesn't appear to happen OOTB, even though it probably should for most cases (especially if your other interfaces are at 1500). Entering 1420 in the MSS field on both ends of my routed WG link fixed all my issues with random TCP connections failing, random TLS failures, etc.

dem

@vbman213 said in WireGuard in pfSense 2.5 Performance:

If I understand the GUI correctly, then the value entered into the MSS field on the interface settings really should be the MTU value...

It sure sounds that way. What value do you see in /tmp/rules.debug?

dem

Never mind, I checked myself and putting 1420 in the MSS field in the GUI results in max-mss 1380 in the rules.

cmcdonald

@dem I wonder if this is worth opening a redmine issue for. I can't see a reason why the max-mss shouldn't be set to to 1380 by default (1420-40) (...and rewording the GUI might be useful as well).

yon 0

According to the report that I found the problem and submitted, wireguard has bugs in the linux kernel, I don't know if freebsd pfsense is involved. This is about mtu icmp and other issues

[wireguard kernel bug(link url)

cmcdonald

@yon-0 So it does look like issues with path discovery, icmp, etc. That would make sense. I still think at least in the interim, that an MSS clamp should be enabled by default in pfSense until there is an upstream fix.

cmcdonald

https://redmine.pfsense.org/issues/11600

yon 0

@rcmcdonald91

They are still working on repairing...

commit ee576c47db60432c37e54b1e2b43a8ca6d3a8dca upstream.

The icmp{,v6}_send functions make all sorts of use of skb->cb, casting
it with IPCB or IP6CB, assuming the skb to have come directly from the
inet layer. But when the packet comes from the ndo layer, especially
when forwarded, there's no telling what might be in skb->cb at that
point. As a result, the icmp sending code risks reading bogus memory
contents, which can result in nasty stack overflows such as this one
reported by a user:

    panic+0x108/0x2ea
    __stack_chk_fail+0x14/0x20
    __icmp_send+0x5bd/0x5c0
    icmp_ndo_send+0x148/0x160

In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read
from it. The optlen parameter there is of particular note, as it can
induce writes beyond bounds. There are quite a few ways that can happen
in __ip_options_echo. For example:

    // sptr/skb are attacker-controlled skb bytes
    sptr = skb_network_header(skb);
    // dptr/dopt points to stack memory allocated by __icmp_send
    dptr = dopt->__data;
    // sopt is the corrupt skb->cb in question
    if (sopt->rr) {
        optlen  = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data
        soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data
        // this now writes potentially attacker-controlled data, over
        // flowing the stack:
        memcpy(dptr, sptr+sopt->rr, optlen);
    }

In the icmpv6_send case, the story is similar, but not as dire, as only
IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is
worse than the iif case, but it is passed to ipv6_find_tlv, which does
a bit of bounds checking on the value.

This is easy to simulate by doing a `memset(skb->cb, 0x41,
sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by
good fortune and the rarity of icmp sending from that context that we've
avoided reports like this until now. For example, in KASAN:

    BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0
    Write of size 38 at addr ffff888006f1f80e by task ping/89
    CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5
    Call Trace:
     dump_stack+0x9a/0xcc
     print_address_description.constprop.0+0x1a/0x160
     __kasan_report.cold+0x20/0x38
     kasan_report+0x32/0x40
     check_memory_region+0x145/0x1a0
     memcpy+0x39/0x60
     __ip_options_echo+0xa0e/0x12b0
     __icmp_send+0x744/0x1700

Actually, out of the 4 drivers that do this, only gtp zeroed the cb for
the v4 case, while the rest did not. So this commit actually removes the
gtp-specific zeroing, while putting the code where it belongs in the
shared infrastructure of icmp{,v6}_ndo_send.

This commit fixes the issue by passing an empty IPCB or IP6CB along to
the functions that actually do the work. For the icmp_send, this was
already trivial, thanks to __icmp_send providing the plumbing function.
For icmpv6_send, this required a tiny bit of refactoring to make it
behave like the v4 case, after which it was straight forward.

brians

Here is real world performance using a custom pfSense 2.5 at home... it is an older HP EliteDesk 800 G1, quad core i5-4570, 12GB RAM, 40GB SSD. I added a second intel NIC for WAN.

My pfSense at home is on a Telus gigabit purefibre connection 1Gbps up/down. Remote site with WireGuard is an SG-5100 21.02 on Telus managed business fibre symmetrical 1Gbps up/down.

Here is screenshot during 70GB of files transferred over SMB from a local Windows 2016 Server to an OMV NAS on remote end, which took about 13 minutes.

xparanoik

@brians Thanks for sharing! Would you be mind running iperf3 tests and share those as well? That'd remove any bottlenecks from SMB protocol or your NAS disks. You seem to have a very good setup since both locations share the same ISP, so I am curious to see iperf3 tests. Thanks!

brians

@xparanoik
I waited until after work to do.

This is from a Windows 10 PC 192.168.10.140 at home connected to pfsense at work 192.168.21.1

In past testing sometimes I get a bit higher send from my house in the 900's but today didn't seem to.

xparanoik

@brians Nice, thanks for sharing

perlenbacher

WireGuard performance should soon be much improved:

https://www.phoronix.com/scan.php?page=news_item&px=FreeBSD-New-WireGuard

link text

KOM

Oof. Not exactly a shining endorsement. I feel bad for Netgate here. They paid for Wireguard in FreeBSD because nobody else gave a damn and then a month after release, the protocol creator shows up and redoes it all for free.

cmcdonald

@kom ugh... I’ll be anxiously biting my nails. The next 24-48 hrs are delicate for everyone involved.

dirtyfreebooter

https://lists.zx2c4.com/pipermail/wireguard/2021-March/006499.html

JFC, this is not shaping up to be professional conversation and collaboration. Netgate/pfSense I am so disappointed... Argh...

brians

This post is deleted!