WireGuard in pfSense 2.5 Performance

cmcdonald

@yon-0 So it does look like issues with path discovery, icmp, etc. That would make sense. I still think at least in the interim, that an MSS clamp should be enabled by default in pfSense until there is an upstream fix.

cmcdonald

https://redmine.pfsense.org/issues/11600

yon 0

@rcmcdonald91

They are still working on repairing...

commit ee576c47db60432c37e54b1e2b43a8ca6d3a8dca upstream.

The icmp{,v6}_send functions make all sorts of use of skb->cb, casting
it with IPCB or IP6CB, assuming the skb to have come directly from the
inet layer. But when the packet comes from the ndo layer, especially
when forwarded, there's no telling what might be in skb->cb at that
point. As a result, the icmp sending code risks reading bogus memory
contents, which can result in nasty stack overflows such as this one
reported by a user:

    panic+0x108/0x2ea
    __stack_chk_fail+0x14/0x20
    __icmp_send+0x5bd/0x5c0
    icmp_ndo_send+0x148/0x160

In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read
from it. The optlen parameter there is of particular note, as it can
induce writes beyond bounds. There are quite a few ways that can happen
in __ip_options_echo. For example:

    // sptr/skb are attacker-controlled skb bytes
    sptr = skb_network_header(skb);
    // dptr/dopt points to stack memory allocated by __icmp_send
    dptr = dopt->__data;
    // sopt is the corrupt skb->cb in question
    if (sopt->rr) {
        optlen  = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data
        soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data
        // this now writes potentially attacker-controlled data, over
        // flowing the stack:
        memcpy(dptr, sptr+sopt->rr, optlen);
    }

In the icmpv6_send case, the story is similar, but not as dire, as only
IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is
worse than the iif case, but it is passed to ipv6_find_tlv, which does
a bit of bounds checking on the value.

This is easy to simulate by doing a `memset(skb->cb, 0x41,
sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by
good fortune and the rarity of icmp sending from that context that we've
avoided reports like this until now. For example, in KASAN:

    BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0
    Write of size 38 at addr ffff888006f1f80e by task ping/89
    CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5
    Call Trace:
     dump_stack+0x9a/0xcc
     print_address_description.constprop.0+0x1a/0x160
     __kasan_report.cold+0x20/0x38
     kasan_report+0x32/0x40
     check_memory_region+0x145/0x1a0
     memcpy+0x39/0x60
     __ip_options_echo+0xa0e/0x12b0
     __icmp_send+0x744/0x1700

Actually, out of the 4 drivers that do this, only gtp zeroed the cb for
the v4 case, while the rest did not. So this commit actually removes the
gtp-specific zeroing, while putting the code where it belongs in the
shared infrastructure of icmp{,v6}_ndo_send.

This commit fixes the issue by passing an empty IPCB or IP6CB along to
the functions that actually do the work. For the icmp_send, this was
already trivial, thanks to __icmp_send providing the plumbing function.
For icmpv6_send, this required a tiny bit of refactoring to make it
behave like the v4 case, after which it was straight forward.

brians

Here is real world performance using a custom pfSense 2.5 at home... it is an older HP EliteDesk 800 G1, quad core i5-4570, 12GB RAM, 40GB SSD. I added a second intel NIC for WAN.

My pfSense at home is on a Telus gigabit purefibre connection 1Gbps up/down. Remote site with WireGuard is an SG-5100 21.02 on Telus managed business fibre symmetrical 1Gbps up/down.

Here is screenshot during 70GB of files transferred over SMB from a local Windows 2016 Server to an OMV NAS on remote end, which took about 13 minutes.

xparanoik

@brians Thanks for sharing! Would you be mind running iperf3 tests and share those as well? That'd remove any bottlenecks from SMB protocol or your NAS disks. You seem to have a very good setup since both locations share the same ISP, so I am curious to see iperf3 tests. Thanks!

brians

@xparanoik
I waited until after work to do.

This is from a Windows 10 PC 192.168.10.140 at home connected to pfsense at work 192.168.21.1

In past testing sometimes I get a bit higher send from my house in the 900's but today didn't seem to.

xparanoik

@brians Nice, thanks for sharing

perlenbacher

WireGuard performance should soon be much improved:

https://www.phoronix.com/scan.php?page=news_item&px=FreeBSD-New-WireGuard

link text

KOM

Oof. Not exactly a shining endorsement. I feel bad for Netgate here. They paid for Wireguard in FreeBSD because nobody else gave a damn and then a month after release, the protocol creator shows up and redoes it all for free.

cmcdonald

@kom ugh... I’ll be anxiously biting my nails. The next 24-48 hrs are delicate for everyone involved.

dirtyfreebooter

https://lists.zx2c4.com/pipermail/wireguard/2021-March/006499.html

JFC, this is not shaping up to be professional conversation and collaboration. Netgate/pfSense I am so disappointed... Argh...

brians

This post is deleted!

heper

@kom why feel bad for netgate?
netgate decided to spend money on one of their products & got a working "thingy" as a result ... netgate's goal has been met

a month later someone else claims they'll supply an even better "thingy" for free.
this doesn't even matter to netgate because the decision to spend money on "thingy" is in the past. the money is gone

what does matter:
we get a shit-throwing competition on reddit / phoronix & a mailing list
all this for FREE ... opensource entertainment at it's finest

xparanoik

@heper It seems that Netgate should have coordinated with Jason D. and perhaps get his input on the patches they planned to submit, then this could have been avoided.

KOM

Netgate is being completely trashed in the comments of the Ars article. It seems that Netgate Scott's msg to Donenfeld isn't being received very well.

heper

@xparanoik
Only the parties involved can comment on that.... Shoulda woulda coulda are pointless when uttered by outsiders

xparanoik

@heper But my suggestion is still objectively a positive thing, assume the opposite is exactly what happeneed as said by Jason himself (and confirmed via other means, such as other mailing list threads).

dirtyfreebooter

@heper this has nothing to do with "FREE". I don't want to be a Netgate customer or use products if the company is going to treat the open-source community which its ENTIRE product line is based off of, both TSNR and pfSense, like garbage and threaten them when they speak up/out.

I sort-of got the whole pfSense+ thing. Seeing things like the Wireguard contributions, made me think they still know that open-source is a big portion of their ecosystem.

But... Scott is acting 1000% unprofessional. Jason's reply was after months of trying to work with Netgate, which apparently went unanswered. And then Scott, so unprofessionally threatens Jason with blog post "warning people not to work with him"... now its the whole OPNsense stuff all over again.

Netgate, grow up. Admit your Wireguard port was not quality, you failed to work with Wireguard properly, apologize to Jason, and more forward with the community.

A Former User

@dirtyfreebooter said in WireGuard in pfSense 2.5 Performance:

Netgate/pfSense I am so disappointed... Argh...

That was an interesting read. Disappointed sounds charitable, childish comes to my mind.

It's going to be hard for Netgate to get past this. I do hope someone has the courage to take ownership, admit what needs to be admitted and set the tone for a more adult demeanor going forward. Any words from Netgate (blog post or whatnot) will sound disingenuous. I guess you make your bed, you have to sleep in it.

Makes me wonder what will make it past code review when they bring out the re-worked, closed source, product?

dirtyfreebooter

https://www.netgate.com/blog/painful-lessons-learned-in-security-and-community.html