How can I get this UDP relay package for casting across VLANs?
-
Obviously it would need to be compiled for aarch64. It might be simple enough a compile against FreeBSD 12.2 will work. You would need to be setup for cross-compiling or have am aarch64 build box.
Adding your comments to the feature request night be best.Steve
-
@tman222 said in How can I get this UDP relay package for casting across VLANs?:
udpbroadcastrelay
I think it is here https://freebsd.pkgs.org/12/freebsd-aarch64/udpbroadcastrelay-0.3.b.txz.html
I can't test it for aarch64, as I don't own one, but downloaded the am64 version copied it to pfSense 2.5.0 and did a
chmod 755 udpbroadcastrelayThen excuted it and it performed nicely.
-
Oh that's interesting, I didn't realise it had been included upstream. Makes things a lot easier.
Though I had to upload it rather than fetch it directly:
[21.02-RELEASE][admin@2100-2.stevew.lan]/tmp: pkg add udpbroadcastrelay-0.3.b.txz Installing udpbroadcastrelay-0.3.b... Extracting udpbroadcastrelay-0.3.b: 100% [21.02-RELEASE][admin@2100-2.stevew.lan]/tmp: rehash [21.02-RELEASE][admin@2100-2.stevew.lan]/tmp: udpbroadcastrelay usage: udpbroadcastrelay [--id ID] [--port udp-port] [--dev dev1] [--dev dev2] [--dev devX] [-s IP] [--multicast ip1] [--multicast ipX] [-t|--ttl-id] [-d] [-f] [-h|--help]Edit: Looks like it was only added last week.
Steve
-
Cool, this is great news! I assume this link is for the amd64 version of the package?
https://pkgs.org/download/udpbroadcastrelay
https://freebsd.pkgs.org/12/freebsd-amd64/udpbroadcastrelay-0.3.b.txz.htmlI actually just recently recompiled the udpbroadcastrelay source for pfSense 2.5.0 (FreeBSD 12.2 Stable) but will keep this link in mind for future versions. I'll also update my initial post in the thread above.
-
@stephenw10 - when installing the
udpbroadcastrelayas a FreeBSD package, where on the file system is the binary located (will be needed for ShellCmd)? Thanks in advance. -
@tman222 said in How can I get this UDP relay package for casting across VLANs?:
@stephenw10 - when installing the
udpbroadcastrelayas a FreeBSD package, where on the file system is the binary located (will be needed for ShellCmd)? Thanks in advance.Usually binary executables from packages go in
/usr/local/binand configuration files in/usr/local/etc. Any shell script provided with the package typically winds up in/usr/local/etc/rc.d. But these are not hard and fast rules - a package creator might deviate from the standard practice. -
-
btw if you don't have the repository, then do a
pkg add https://pkg.freebsd.org/FreeBSD:12:amd64/quarterly/All/udpbroadcastrelay-0.3.b.txzfor an AMD64 and then a
rehashand a
pkg info udpbroadcastrelayshows it is nicely installed
[2.5.0-RELEASE][root@pfSense.localdomain]/: pkg info udpbroadcastrelay udpbroadcastrelay-0.3.b Name : udpbroadcastrelay Version : 0.3.b Installed on : Wed Mar 17 11:54:50 2021 CET Origin : net/udpbroadcastrelay Architecture : FreeBSD:12:amd64 Prefix : /usr/local Categories : net Licenses : GPLv2 Maintainer : m.muenz@gmail.com WWW : https://github.com/marjohn56/udpbroadcastrelay Comment : UDP multicast/unicast relayer Annotations : FreeBSD_version: 1202000 Flat size : 39.2KiB Description : udpbroadcastrelay is a UDP multicast relayer. Its intended use is to rebroadbcast udp packets on a specific port across interfaces, be those interfaces physical or VLAN. It is used where devices such as Sonos or Sky are spread accross different subnets and are not able to detect the servers or devices. WWW: https://github.com/marjohn56/udpbroadcastrelay -
Hi,
can someone give me a hint how the command looks like for Shellcmd/command prompt (pfsense 2.5.0 / APU2C4)?
With "find / -name 'udpbroadcastrelay'" I could find udpbroadcastrelay in "/usr/local/sbin/".
With Putty and "/usr/local/sbin/udpbroadcastrelay --id 1 --port 5353 --dev igb1 --dev igb1.12 --multicast 224.0.0.251 -s 1.1.1.1 -f > /dev/null" everything works perfectly but not in pfSene (command prompt) itself. -
@itar said in How can I get this UDP relay package for casting across VLANs?:
Hi,
can someone give me a hint how the command looks like for Shellcmd/command prompt (pfsense 2.5.0 / APU2C4)?
With "find / -name 'udpbroadcastrelay'" I could find udpbroadcastrelay in "/usr/local/sbin/".
With Putty and "/usr/local/sbin/udpbroadcastrelay --id 1 --port 5353 --dev igb1 --dev igb1.12 --multicast 224.0.0.251 -s 1.1.1.1 -f > /dev/null" everything works perfectly but not in pfSene (command prompt) itself.Hi @itar - please take a look at my post above, I think you might be missing the
/usr/bin/nohupcommand as part of the ShellCmd: -
Hi tman222,
thank you very much!
I read your post, but I thought it would also work with "/usr/local/sbin" instead of "/root/udpbroadcastrelay/". Now I copied "udpbroadcastrelay" to root... and it works like a charm
-
@itar said in How can I get this UDP relay package for casting across VLANs?:
Hi tman222,
thank you very much!
I read your post, but I thought it would also work with "/usr/local/sbin" instead of "/root/udpbroadcastrelay/". Now I copied "udpbroadcastrelay" to root... and it works like a charm
Hi @Itar - I would have expected it to work from
/usr/local/sbinas well as long as you have the/usr/local/nohupand call the executable by./udpbroadcastrelayif needed (note the./) The instructions above are bit dated back from when we had to compile the code manually to create the binary vs. installing it as a FreeBSD package. -
Hi tman222,
no, I tried /usr/bin/nohup /usr/local/sbin/udpbroadcastrelay/./udpbroadcastrelay --id 1 --port 5353 --dev igb0 --dev igb1 --multicast 224.0.0.251 -s 1.1.1.1 -f > /dev/null but it didn't work.
-
This post is deleted! -
@itar said in How can I get this UDP relay package for casting across VLANs?:
Hi tman222,
no, I tried /usr/bin/nohup /usr/local/sbin/udpbroadcastrelay/./udpbroadcastrelay --id 1 --port 5353 --dev igb0 --dev igb1 --multicast 224.0.0.251 -s 1.1.1.1 -f > /dev/null but it didn't work.
Hmmm - do either of these work?
/usr/bin/nohup /usr/local/sbin/./udpbroadcastrelay --id 1 --port 5353 --dev igb0 --dev igb1 --multicast 224.0.0.251 -s 1.1.1.1 -f > /dev/nullor
/usr/bin/nohup /usr/local/sbin/udpbroadcastrelay --id 1 --port 5353 --dev igb0 --dev igb1 --multicast 224.0.0.251 -s 1.1.1.1 -f > /dev/null -
Ahhhhh,
/usr/bin/nohup /usr/local/sbin/udpbroadcastrelay --id 1 --port 5353 --dev igb0 --dev igb1 --multicast 224.0.0.251 -s 1.1.1.1 -f > /dev/null
is working!
Thanks!
-
Re: How can I get this UDP relay package for casting across VLANs?
So I just came across this thread after trying for over a day to get Sonos clients on my LAN subnet discovering the Sonos devices on an isolated IOT subnet using the PIMD package as a multicast reflector.
IOS clients that had previously been connected when everything was on the same subnet continue to work once the relevant firewall rules were setup, but new clients (Mac, Win10) can't discover the Sonos device.
I've removed PIMD, rebooted and installed the package as per the instructions above. I'm seeing the following error when trying to run the command (as root) with the debug option:
# udpbroadcastrelay --id 1 --port 1900 --dev igb1 --dev igb2 --multicast 239.255.255.250 -d ID set to 1 Port set to 1900 ID: 1 (DSCP: 1, ToS: 0x04), Port 1900 igb1: 2 / 172.16.10.1 / 172.16.10.255 igb2: 3 / 172.16.20.1 / 172.16.20.255 found 2 interfaces total IP_ADD_MEMBERSHIP: 172.16.10.1 239.255.255.250 IP_ADD_MEMBERSHIP: 172.16.20.1 239.255.255.250 bind: Address already in use rcv bindNot sure what would already be using 239.255.255.250:1900 or how to go about debugging from here.
Any pointers greatly appreciated
-
did you do a ps to check if it is already running?
-
There are no other instances of udpbroadcastrelay running but pfTop shows an existing state from the pfsense interface on the IOT subnet.
pfTop: Up State 1-1/1 (545), View: default, Order: bytes PR DIR SRC DEST STATE AGE EXP PKTS BYTES udp Out 172.16.20.1:52980 239.255.255.250:1900 SINGLE:NO_TRAFFIC 00:02:52 00:00:09 132 62676I'll try temporarily powering down all other devices on that subnet and see if that helps
-
The way to check if it running and to stop udpbroadcastrelay is using the ps command and kill the process using it's process number (PID)
[2.5.0-RELEASE][root@pfSense.localdomain]/root: ps PID TT STAT TIME COMMAND 7615 u0- S 41:14.27 /usr/local/sbin/pcscd 60580 u0 Is 0:00.02 login [pam] (login) 60845 u0 I 0:00.01 -sh (sh) 61388 u0 I+ 0:00.01 /bin/sh /etc/rc.initial 2456 v0 I 0:00.02 -sh (sh) 3896 v0 I+ 0:00.01 /bin/sh /etc/rc.initial 99884 v0 Is 0:00.02 login [pam] (login) 188 v1 Is+ 0:00.01 /usr/libexec/getty Pc ttyv1 330 v2 Is+ 0:00.01 /usr/libexec/getty Pc ttyv2 368 v3 Is+ 0:00.01 /usr/libexec/getty Pc ttyv3 579 v4 Is+ 0:00.01 /usr/libexec/getty Pc ttyv4 592 v5 Is+ 0:00.01 /usr/libexec/getty Pc ttyv5 1002 v6 Is+ 0:00.01 /usr/libexec/getty Pc ttyv6 1293 v7 Is+ 0:00.01 /usr/libexec/getty Pc ttyv7 6730 0 S 0:00.00 udpbroadcastrelay --id 1 --port 1900 --dev igb1.1005 --dev igb1.1007 --multicast 239.255.255.250 -f 6919 0 R+ 0:00.01 ps 41171 0 Is 0:00.02 -sh (sh) 41565 0 I 0:00.01 /bin/sh /etc/rc.initial 45295 0 S 0:00.12 /bin/tcsh/root: kill 6730[2.5.0-RELEASE][root@pfSense.localdomain]/root: ps PID TT STAT TIME COMMAND 7615 u0- S 41:14.29 /usr/local/sbin/pcscd 60580 u0 Is 0:00.02 login [pam] (login) 60845 u0 I 0:00.01 -sh (sh) 61388 u0 I+ 0:00.01 /bin/sh /etc/rc.initial 2456 v0 I 0:00.02 -sh (sh) 3896 v0 I+ 0:00.01 /bin/sh /etc/rc.initial 99884 v0 Is 0:00.02 login [pam] (login) 188 v1 Is+ 0:00.01 /usr/libexec/getty Pc ttyv1 330 v2 Is+ 0:00.01 /usr/libexec/getty Pc ttyv2 368 v3 Is+ 0:00.01 /usr/libexec/getty Pc ttyv3 579 v4 Is+ 0:00.01 /usr/libexec/getty Pc ttyv4 592 v5 Is+ 0:00.01 /usr/libexec/getty Pc ttyv5 1002 v6 Is+ 0:00.01 /usr/libexec/getty Pc ttyv6 1293 v7 Is+ 0:00.01 /usr/libexec/getty Pc ttyv7 37961 0 R+ 0:00.00 ps 41171 0 Is 0:00.02 -sh (sh) 41565 0 I 0:00.01 /bin/sh /etc/rc.initial 45295 0 S 0:00.13 /bin/tcsh
