How do I enable another network's printer on SG-1100?
-
@johnpoz I'm sorry but I have difficulties in translating your language I am Sicilian and therefore I do not understand well if you can use a more basic language thanks :-)
-
@stephenw10 @johnpoz Sorry but there is a guide HOW TO PRINT USING A PRINTER ON ANOTHER SUBNET?
-
is there anyone who can help me?
-
The default LAN rule will allow a client on the LAN to print to a printer in the WAN subnet.
What error do you see when you try to print to it by IP address or FQDN?
You will not be able to 'discover' it.
Steve
-
@stephenw10 Hi, the printer is on the fritzbox network 192.168.2.1 the error it gives me is: printer offline. I cannot print from the 192.168.1.1 network, also the printer has a fixed ip. The printer is an HP LaserJet Pro MFP M28w Printer.
-
And you have it setup by IP address directly?
-
@stephenw10 The printer is configured on the fritzbox and works in wifi, what I want is to make the printer work in wifi also on the sg-1100
-
@stephenw10 For example, the printer is located in the 192.168.2.1 subnet while the smartphone tablet computers are located in the 192.168.1.1 subnet.
-
@stephenw10 As you can see in the figure I have an access point connected with the sg 1100 that works from wifi this has another ip address 192.168.2.254.
All devices connected to the wifi of the access point tablet pc smartphone cannot print gives me an offline printer error.
-
Can you ping the printer's IP from the PC?
-
@teamits
-
Right, so you should be able to print to 192.168.2.21 too.
You cannot just 'find' it on the network in Windows because it's no longer in the same subnet. You must setup the printer on that IP in Windows.
Steve
-
Then it should work to create a "Standard TCP/IP port" to 192.168.2.21 when creating the printer.
You might check your antivirus/firewall isn't blocking it. For instance we set up our clients' Bitdefender to block access to any network printer if the network is marked as Public instead of Private. It's been a while so I can't remember if that's the default or not, but if the printer is in a different subnet it may be getting blocked that way also.
-
@teamits @stephenw10 Hi,
the antivirus is disabled, I want to print from the 192.168.1.1 network using the printer configured in the 192.168.2.1 network
That is, all devices connected via wifi on the 192.168.1.1 network can print.
Furthermore, the wifi on the 192.168.1.1 network comes from the ip access point 192.168.2.254 connected to 192.168.1.1 that is SG-1100.
There is no printer connected to the access point. Only on the router is fritzbox connected.
So what needs to be done? -
@antonio-briguglio said in How do I enable another network's printer on SG-1100?:
all devices connected via wifi on the 192.168.1.1 network can print
Ok and they are connecting through the pfSense? Then the pfSense isn't blocking printing...
It seems like it should be just adding a printer in Windows and choosing:
"The printer I want isn't listed"
and then:
-
Are you using the 192.168.2.X subnet in two places?
the ip access point 192.168.2.254
the printer is located in the 192.168.2.1
It looks like those things are on the LAN and WAN side of the SG-1100. Yoi cannot use that twice if so. Clients trying to reach the printer will fail because they would be in the same subnet.
However you were able to ping it so that seems unlikely.
You probably just need to configure the printer by IP in Windows.
Steve
-
@stephenw10 @TEAMITS I understand your reasoning ... but I need a single printer to make it work on two networks.
My printer is multi-function also acts as a scanner, but if I do a scan and I am in the 192.168.1.1 network it works while the wifi to print does not and I do not understand.
but you have to make some rules on the lan? Also rule on the nat? -
@antonio-briguglio said in How do I enable another network's printer on SG-1100?:
but you have to make some rules on the lan?
What are your rules on your lan? The default rule is ANY ANY - so NO you wouldn't have to put any special rules..
How about you post a picture of your lan rules..
Maybe you would have better luck in your native language section.
-
-
@johnpoz the friends of the English group are better prepared
than the Italian ones, also because pfsense is still little used in Italy
