Enabling IPv6 on Comcast home network
-
BTW I think xfinity rental fee is up to like $14 a month, and if have them do their xfinity fi nonsense its like $25 a month.. $300 a YEAR... Buy your own stuff.. You could get pretty fancy $200 2.5gig docsis modem and a couple of unifi AX AP and have that paid for in less then 18 months..
-
As I said, I don't have an option. The modem/gateway is included with the service. There is no option for providing your own. I believe the same is true with the phone company. However, some resellers may allow customer owned hardware. As I mentioned, there have been times when I got a new modem and my service increased while the cost went down.
-
That was really meant to the OP and any other viewer of the thread.
BTW - stuff I am reading is rogers just hides the "rental" fee..
-
They also hid the fee when they fished coax and 2 pieces of CAT5 the length of my condo, running it inside a wall, along side an air duct, over my bedroom closet & bathroom and over my laundry room to reach my "office" at the other end of my unit. The cables were only visible where they crossed the laundry room ceiling and came through the wall into my office closet. They even patched the drywall where they had to cut through it. It took 2 guys 3 hours to do that. They've also provided IPv6 natively for over 5 years and via 6rd & 6to4 tunnels for a couple of years prior to that. They generally provide excellent service, so I'm not worried about the rental being included in my bill.
-
This was an informative thread. Now I know why I have been unable to get IPv6 going. I will take into consideration what I learned here and post what I did to get it going.
-
@lenhuppe re: "HE Tunnel": Netgate has instructions to set up a tunnel broker. Had to do it once...worked great except that I had to restart the pfSense after setting it up to get it fully working (DNS lookups to the LAN IPv6 were failing, and I could not ping the router LAN IPv6, but IPv6 was otherwise usable). Hurricane Electric provides this for free.
-
@lenhuppe said in Enabling IPv6 on Comcast home network:
I have accessed the cable modem and found the "Delegated prefix" number. Its an Xfinity CGM4140COM if that helps at all. I just need to know where to enter the prefix.
That number sounded familiar, so I checked mine. It's a Technicolor CGM4140COM.
Does yours look anything like this?
-
-
I need access to see those. Why not just paste the image as I did. Or if you need to use a file, just attach it here.
-
-
You showed a different page than I did, but it appears it's the same device. It's easy to put into bridge mode.
BTW, I believe Rogers uses the same IPTV system as Comcast, so no surprise it's the same modem.
-
I need to get a land line so that we can still have POTS and an access point that works well in a home setting. Then I can switch to bridge mode.
-
@lenhuppe said in Enabling IPv6 on Comcast home network:
I need to get a land line
Huh? You have a phone number you don't want to loose? Just run on cell, like everyone else on the planet under the age of 80 ;)
An intelligent man is sometimes forced to be drunk to spend time with his fools
If you get confused: Listen to the Music Play
Please don't Chat/PM me for help, unless mod related
SG-4860 24.11 | Lab VMs 2.8, 24.11 -
I also have home phone through that box and bridge mode doesn't affect it. It still works fine.
-
Putting that box into bridge mode doesn't have any effect on the phone line. I have a bundled Internet/TV/phone deal and removing the phone would break the bundle and cost me more.
-
This post is deleted! -
@jknott said in Enabling IPv6 on Comcast home network:
Putting that box into bridge mode doesn't have any effect on the phone line. I have a bundled Internet/TV/phone deal and removing the phone would break the bundle and cost me more.
That is good to know ... my dad is 89 and he uses his POTS line daily.
-
@lenhuppe said in Enabling IPv6 on Comcast home network:
my dad is 89
Well that explains the pots line ;) heheheh
We didn't want to loose the number - not sure why pretty much only get "extended warranty, scam sort of calls" but do like having a house number. So we got little box that plug into the house phone line and not all the normal house phones work over cell.
Just another option if you don't want to bundle phone with your internet.
Saved money that way vs paying the like 50$ a month it was for pots line. Has worked out well - and yeah wife uses house line every day..
-
@johnpoz said in Enabling IPv6 on Comcast home network:
Well that explains the pots line ;) heheheh
That's not the only reason. I long had poor cell coverage in my home. So, until I could use WiFi calling, I really needed a POTS line. That said, however, cell coverage seems to be improving in the past few years.
-
@jknott said in Enabling IPv6 on Comcast home network:
I really needed a POTS line
Or you could of just done voip. Yeah pots is very reliable - but cost is over priced..
