Ddns with no-ip stopped working after 2.5.2 update

AlexanderK

My ddns settings with no-ip (paid) stopped working after updating to 2.5.2.

Username and password are correct and working in other fws
I am away from pfsense appliance and it was really difficult to find what was wrong.

Be careful if your using no-ip as your ddns provider.

Yanik

Just checked after saw your post, mine is not working too.
Same error about username/password.

jimp

Try the change on https://redmine.pfsense.org/issues/12021 to see if it helps for you.

You can install the System Patches package and then create an entry for 4aab19d4ade5d164c22bd63b2833d54bab740d59 to apply the fix.

Yanik

@jimp said in Ddns with no-ip stopped working after 2.5.2 update:

4aab19d4ade5d164c22bd63b2833d54bab740d59

Patch worked for me. All good now.

Gabri.91

Confirmed fixed for me with 4aab19d4ade5d164c22bd63b2833d54bab740d59

Another workaround (less secure but no need to install system patches) is to remove any symbols from the password.

aGeekhere

Had the same issue, patch worked

znamloot

I am having the same issue with no-ip.... my reverse proxies were not working.

I saw this post and tried to install patch but I get this message when I do a test.

Did I do something wrong ..... I never used patches so I suspect I've done something wrong.

Any help would be appreciated.

Thanks in advance
znamloot

Gabri.91

@znamloot could you show the patch settings?

znamloot

I hope this shows up - not showing in my preview. This is after the fetch.

Znamloot

znamloot

Additional info. I put the patch id in patch contents the first time - changed the existing patch and then re-applied. I think I should garbage this patch and then do it properly?

Documentation is a wonderful think .... just got to read it first .... DOH!

This is the message I get if I hit test - so think it might be screwed up.....

rameshk

@alexanderk
I also had the same issue with No-IP and revert it back to 2.5.1. Now everything works fine.

Nothing wrong with No-ip. pfSense 2.5.2 got an issue in Dynamic DNS I beleive.

znamloot

How did you revert back to 2.5.1?

Sounds like that's the best solution.

Thanks

Znamloot

fireodo

This post is deleted!

rameshk

@znamloot
I run my main firewall on Exsi VM. Every time I do a major update or configuration changes create a snapshot of the running configuration.

It takes only a couple of minutes to revert it back and start the VM.

Thanks

znamloot

Well rameshk you have reminded me that my pfsense runs in a VM on my Unraid server.

I do daily backups of the VM so just need to restore the backup from a couple of days ago....

WooHoo!

I'll restore the backup and should be good to go.

Thanks

Znamloot

peters77

Since I update from 2.4.x to 2.51. and 2.5.2 the community version of no-ip dyndns is not working any more. 2.4.x worked flawless.
As I get a forced DSL interruption every night the pfsense no longer gets a new IP from no-ip free.

Jul 10 04:45:04 
php 
47132 
rc.dyndns.update: phpDynDNS (xxx.no-ip.biz): (Error) Invalid username password combination 
Jul 10 04:45:04 
php 
47132 
rc.dyndns.update: Dynamic DNS noip-free (xxx.no-ip.biz): _checkStatus() starting. 
Jul 10 04:45:04 
php 
47132 
rc.dyndns.update: Response Data: badauth\x0d

The proposed fix curl_setopt($ch, CURLOPT_USERPWD, $this->_dnsUser . ':' . $this->_dnsPass); seems not to work here...
If i manually desable the service and enable it again, the ip is updated!?
Just for info.

Have to switch to dyndns updates in my Fritzbox till it's fixed in the 2.5.x branch... :-/

provels

I had to apply the patch, remove special characters from my PW and disable/enable/force update to make it work.

peters77

Thanks fo this hint, I removed the special charakters, applied the patch and restarted. But anyway it's not working, after a reset of my DSL interface I still didn't get a new IP.

Jul 13 09:54:03 php-fpm 1472 
/rc.dyndns.update: Dynamic DNS (xxx.no-ip.biz) There was an error trying to determine the public IP for interface - wan (igb0 ). 
Jul 13 09:54:03 php-fpm 1472 
/rc.dyndns.update: Dynamic DNS (xxx.no-ip.biz): running get_failover_interface for wan. found igb0 
Jul 13 09:53:19 php-fpm 1472 
/rc.dyndns.update: Dynamic DNS: updatedns() starting

IP update runs flawless on my FritzBox with the same credentials... So still something broken here...!?

IssueHaver

Same problem here, tried adding the patch, disabling the service, enabling the service and forcing update, but still:

rc.dyndns.update: phpDynDNS (hostname): (Error) Invalid username password combination

What is weird is that I had two hostnames on same account and router, both updating, one stopped working after 2.5.2 update and I didn't notice, and the second one stopped working today around the same time as the Akamai DNS thing. Getting wrong credentials error for both. How it worked at all for two weeks is a mystery to me.

I did make the password unsafe, but still doesn't work.

IssueHaver

Compounding issue:
There seems to be an additional bug. Log says:

/services_dyndns_edit.php: phpDynDNS (hostname): (Success) No Change In IP Address

Services > Dynamic DNS shows my current WAN address under Cached IP, but the actual DNS A record remains on the old one, after this it will never update again because it says it is already updated. This is very bad as there's no longer a way to auto fix itself, what it should do is check the actual DNS record after it updates and cache that - NOT cache the address it thinks it has set, why it doesn't do this is beyond me.