Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    NUT package (2.8.0 and below)

    Scheduled Pinned Locked Moved
    UPS Tools
    128
    1.2k
    3.0m
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      tman222 @dennypage
      last edited by tman222

      @dennypage - actually, here is a list of all the CyberPower monitored variables from UPS status page. First one is with the interruptonly flag set, the second one is the full set (i.e. regular with polling enabled). I figured it would easier for you to diff the sets this way:

      Interrupt Only:
      battery.charge
      battery.runtime
      battery.runtime.low
      device.mfr
      device.model
      device.serial
      device.type
      driver.flag.interruptonly
      driver.name
      driver.parameter.pollfreq
      driver.parameter.pollinterval
      driver.parameter.port
      driver.parameter.synchronous
      driver.version
      driver.version.data
      driver.version.internal
      driver.version.usb
      ups.beeper.status
      ups.mfr
      ups.model
      ups.productid
      ups.serial
      ups.status
      ups.vendorid

      Full (Polling Enabled):
      battery.charge
      battery.charge.low
      battery.charge.warning
      battery.mfr.date
      battery.runtime
      battery.runtime.low
      battery.type
      battery.voltage
      battery.voltage.nominal
      device.mfr
      device.model
      device.serial
      device.type
      driver.name
      driver.parameter.pollfreq
      driver.parameter.pollinterval
      driver.parameter.port
      driver.parameter.synchronous
      driver.version
      driver.version.data
      driver.version.internal
      driver.version.usb
      input.voltage
      input.voltage.nominal
      output.voltage
      ups.beeper.status
      ups.delay.shutdown
      ups.delay.start
      ups.load
      ups.mfr
      ups.model
      ups.productid
      ups.realpower.nominal
      ups.serial
      ups.status
      ups.test.result
      ups.timer.shutdown
      ups.timer.start
      ups.vendorid

      Hope this helps.

      1 Reply Last reply Reply Quote 2
      • S
        shaffergr @dennypage
        last edited by

        @dennypage

        "pkg list" shows nut-2.7.4_20 installed

        dennypageD 1 Reply Last reply Reply Quote 1
        • dennypageD
          dennypage @shaffergr
          last edited by

          @shaffergr said in NUT package:

          "pkg list" shows nut-2.7.4_20 installed

          That's what I expected. With 23.01, pfSense moved to nut 2.8.0. I expect that it's a regression in nut itself.

          S 2 Replies Last reply Reply Quote 1
          • S
            shaffergr @dennypage
            last edited by

            @dennypage

            I also added the "interruptonly" flag to the "Extra Arguments to driver" at approx 11:40 AM. No signal 10 errors/issues found in /var/log/system.log so far (little over 3 hours).

            1 Reply Last reply Reply Quote 2
            • S
              shaffergr @dennypage
              last edited by

              @dennypage

              Also if it helps, XG-7100 has a Intel(R) Atom(TM) CPU C3558 @ 2.20GHz processor and my TrueNAS system is a SuperMicro Server MB with an Intel(R) Atom(TM) CPU C3758 @ 2.20GHz processor, so both amd64 architecture.

              dennypageD 1 Reply Last reply Reply Quote 2
              • dennypageD
                dennypage @lcbbcl
                last edited by

                @lcbbcl, @xavier1 Are you still having a problem or is it resolved?

                X L 2 Replies Last reply Reply Quote 1
                • dennypageD
                  dennypage @shaffergr
                  last edited by

                  @shaffergr, @tman222, @JonathanLee Can you check on your systems and see if you have any existing core dumps from usbhid-ups?

                  They would probably be in /root, but just in case you can run

                  find / -name '*.core'

                  to search the entire system. Thanks.

                  S JonathanLeeJ 2 Replies Last reply Reply Quote 1
                  • X
                    xavier1 @dennypage
                    last edited by

                    @dennypage Yeah same issue. Did a clean install upgraded from 2.6.0 up to 23.01 then added the package still no luck. Says daemon pending. Then reloaded my xml config and still no go.

                    dennypageD 1 Reply Last reply Reply Quote 1
                    • L
                      lcbbcl @dennypage
                      last edited by

                      @dennypage
                      I delete and reinstall nut and i have the same problem.
                      Why i see Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                      Pf is not able to find that file, is not generated or what?

                      dennypageD 1 Reply Last reply Reply Quote 1
                      • S
                        shaffergr @dennypage
                        last edited by

                        @dennypage @tman222, @JonathanLee

                        no cores found. Also nothing in /var/crash

                        dennypageD 1 Reply Last reply Reply Quote 1
                        • dennypageD
                          dennypage @xavier1
                          last edited by

                          @xavier1 said in NUT package:

                          Did a clean install upgraded from 2.6.0 up to 23.01 then added the package still no luck. Says daemon pending.

                          Can you confirm that you have rebooted or done an unplug/replug following reload of config and install of nut? There is a common permissions issue with usb until you do that.

                          Please confirm that you are using UPS Type of "Local USB" with driver "usbhid", and that you have nothing in the Extra Arguments to driver section, and the all sections of the Advanced settings are empty. [You can stuff back later if needed]

                          Where do you see "daemon pending"? In the widget? In the status page (Services / UPS / Status)? In both? If the status page, what happens if you refresh the browser? Does it still show pending?

                          Lastly, can you check your system logs and post any entries matching "usbhid" since the reboot please? Thanks

                          1 Reply Last reply Reply Quote 1
                          • dennypageD
                            dennypage @shaffergr
                            last edited by

                            @shaffergr said in NUT package:

                            no cores found

                            I was afraid of that. Since nut is not running as root, it won't be able to write to /root.

                            Would you mind executing the following in a shell and then regenerating the crash?

                            sysctl kern.corefile=/var/tmp/%N.core

                            This will cause the core file to be written in /var/tmp which is world writable. Note that this setting will not persist across reboots.

                            Thanks

                            S 1 Reply Last reply Reply Quote 1
                            • dennypageD
                              dennypage @lcbbcl
                              last edited by

                              @lcbbcl said in NUT package:

                              Why i see Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                              Pf is not able to find that file, is not generated or what?

                              It's not a file per se. That is a message from upsd saying that the driver isn't running.

                              Please run usbconfig and confirm that the ups appears there. Also, can you confirm that you have rebooted or done an unplug/replug following reload of config and install of nut? There is a common permissions issue with usb until you do that.

                              Please confirm that you are using UPS Type of "Local USB" with driver "usbhid", and that you have nothing in the Extra Arguments to driver section, and the all sections of the Advanced settings are empty. [You can stuff back later if needed]

                              Lastly, please search your system logs for items matching "usbhid" and post the result.

                              L 1 Reply Last reply Reply Quote 1
                              • S
                                shaffergr @dennypage
                                last edited by

                                @dennypage done. removed the "interruptonly" and hit "save". Console shows:

                                [23.01-RELEASE][X@Y]/root: sysctl kern.corefile=/var/tmp/%N.core
                                kern.corefile: /root/%N.core -> /var/tmp/%N.core

                                Broadcast Message from root@Y
                                (no tty) at 16:07 EST...

                                Communications with UPS CyberPower lost

                                Broadcast Message from root@Y
                                (no tty) at 16:07 EST...

                                Communications with UPS CyberPower established

                                Now we wait...

                                dennypageD 1 Reply Last reply Reply Quote 2
                                • JonathanLeeJ
                                  JonathanLee @dennypage
                                  last edited by

                                  @dennypage I show nothing for logs they already rotated for me. :(

                                  Make sure to upvote

                                  1 Reply Last reply Reply Quote 0
                                  • dennypageD
                                    dennypage @shaffergr
                                    last edited by

                                    @shaffergr I don't think it will be necessary, but if it doesn't generate a core file, add this:

                                    sysctl kern.sugid_coredump=1
                                    S 1 Reply Last reply Reply Quote 1
                                    • L
                                      lcbbcl @dennypage
                                      last edited by lcbbcl

                                      @dennypage
                                      Well i just delete, reboot and reinstall nut not the operating system. Weird that i don't know why after remove nut i still had the settings when i did reinstall.
                                      Feb 19 20:34:08 zid upsd[20330]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 19 20:34:17 zid upsd[42475]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 19 20:34:54 zid upsd[15895]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 19 20:35:00 zid upsd[30880]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 19 20:38:11 zid upsd[36439]: Can't connect to UPS [ups] (usbhid-ups-ups): No such file or directory
                                      Feb 19 20:38:30 zid upsd[79042]: Can't connect to UPS [ups] (usbhid-ups-ups): No such file or directory
                                      Feb 19 20:39:12 zid upsd[51078]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 20:23:30 zid upsd[46012]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 20:28:30 zid upsd[46012]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 20:45:54 zid upsd[12751]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 20:49:57 zid upsd[82271]: Can't connect to UPS [ups] (usbhid-ups-ups): No such file or directory
                                      Feb 20 20:50:51 zid upsd[64233]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 20:52:27 zid upsd[415]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 20:52:36 zid upsd[85556]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 20:52:39 zid upsd[59802]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 22:08:57 zid upsd[92079]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 22:16:05 zid upsd[94197]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 22:19:28 zid upsd[60128]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 22:20:08 zid upsd[45874]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 22:20:11 zid upsd[73849]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 22:22:57 zid upsd[87326]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 22:23:07 zid upsd[93669]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 22:23:10 zid upsd[66247]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      Feb 20 22:24:27 zid upsd[70162]: Can't connect to UPS [APC] (usbhid-ups-APC): No such file or directory
                                      [23.01-RELEASE][admin@]/var/log: usbconfig
                                      ugen0.1: <Intel XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
                                      ugen0.2: <American Power Conversion Smart-UPS C 1000 FW:UPS 12.0 / ID1005> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (2mA)

                                      dennypageD 1 Reply Last reply Reply Quote 1
                                      • dennypageD
                                        dennypage @lcbbcl
                                        last edited by

                                        @lcbbcl I need the messages from the usbhid-ups process. The messages from upsd are expected when usbhid-ups isn't running.

                                        If you don't have any log entries from usbhid-ups, then please post your ups settings (Services / UPS / Settings)

                                        I'll be away for a bit... but will look at it when I'm back.

                                        L 1 Reply Last reply Reply Quote 1
                                        • L
                                          lcbbcl @dennypage
                                          last edited by

                                          @dennypage
                                          I have no msg/error from usbhid-ups
                                          Screenshot_20230220_223805.png

                                          dennypageD 2 Replies Last reply Reply Quote 1
                                          • dennypageD
                                            dennypage @lcbbcl
                                            last edited by

                                            @lcbbcl If you re-save your ups settings, it will restart the processes and you should be able to find usbhid entries.

                                            1 Reply Last reply Reply Quote 1
                                            • First post
                                              Last post