NUT package (2.8.0 and below)
-
@dennypage said in NUT package:
ls -lc /usr/syno/etc/ups
root@Synology:~# ls -lc /usr/syno/etc/ups total 24 -rw-r----- 1 root root 5515 May 15 03:20 nutscan-usb.h -rw-r----- 1 root root 3935 Aug 9 17:42 ups.conf -rw-r----- 1 root root 15 May 15 03:20 upsd.conf -rw-r----- 1 root root 2016 Aug 9 17:44 upsd.users -rw-r--r-- 1 root root 0 Aug 9 17:42 upsmon.conf -rw-r----- 1 root root 4020 Aug 9 17:42 upssched.confupsmon.conf has read rights for root, root (group), and others so I should be able to read the contents.
-
@kevindd992002 said in NUT package:
upsmon.conf has read rights for root, root (group), and others so I should be able to read the contents.
Your upsmon.conf is a zero bytes file.
Here mine for comparison :
root@DiskStation:~# ls -lc /usr/syno/etc/ups total 36 -rw-r----- 1 root root 5515 May 15 06:19 nutscan-usb.h -rw-r----- 1 root root 3935 Aug 7 17:12 ups.conf -rw-r----- 1 root root 15 May 15 06:19 upsd.conf -rw-r----- 1 root root 2016 May 15 06:19 upsd.users -rw-r--r-- 1 root root 12151 Aug 7 17:12 upsmon.conf -rw-r----- 1 root root 4051 Aug 7 17:12 upssched.confIt seems that only your upsmon.conf file is created correctly.
Mine has 12151 bytes, yours none.edit : something in your (Syno GUI) settings makes the system complain, and it fails to create the config file ?
-
@Gertjan said in NUT package:
@kevindd992002 said in NUT package:
upsmon.conf has read rights for root, root (group), and others so I should be able to read the contents.
Your upsmon.conf is a zero bytes file.
Here mine for comparison :
root@DiskStation:~# ls -lc /usr/syno/etc/ups total 36 -rw-r----- 1 root root 5515 May 15 06:19 nutscan-usb.h -rw-r----- 1 root root 3935 Aug 7 17:12 ups.conf -rw-r----- 1 root root 15 May 15 06:19 upsd.conf -rw-r----- 1 root root 2016 May 15 06:19 upsd.users -rw-r--r-- 1 root root 12151 Aug 7 17:12 upsmon.conf -rw-r----- 1 root root 4051 Aug 7 17:12 upssched.confIt seems that only your upsmon.conf file is created correctly.
Mine has 12151 bytes, yours none.edit : something in your (Syno GUI) settings makes the system complain, and it fails to create the config file ?
Right, I notice that. You mean my upsmon.conf is NOT created correctly.
Nothing complains in the Syno GUI but it doesn't follow any of the UPS master's (in pfsense) commands and there is no log in pfsense where the UPS is connecting to it using the monuser account.
-
@kevindd992002 said in NUT package:
is NOT created correctly
Yep, that right - sorry for the typo.
I taled the main messages 'syslog' - it does show up some UPS related messages.
Here I activate the UPs with the 192.168.1.1 == my pfSense.
2019-08-20T17:26:39+02:00 DiskStation synoscgi_SYNO.Core.ExternalDevice.UPS_1_set[8663]: webapi-UPS.cpp:238 Set Service from Disable to Enable 2019-08-20T17:26:41+02:00 DiskStation upsmon[8721]: Startup successful 2019-08-20T17:26:41+02:00 DiskStation upsmon[8723]: UPS [ups@192.168.1.1] connectedI used the command
tail -f /var/log/messagesUse also
grep 'ups' /var/log/messages -
@Gertjan said in NUT package:
grep 'ups' /var/log/messages
Thanks for the tip. Look at my /var/log/messages: https://pastebin.com/pGHXFzgp
It looks like the last time my UPS connection worked properly was on 6/4/2019 which was a long time ago! I don't know what happened but I see a lot of these now:
2019-06-04T17:58:02+08:00 Synology synoservice: synoservice.c:1559 pause gcpd du e to require service cupsd runkey is stop
You have any clue as to what's that?
-
Your Syno clock is ok ?
Or all messages from last month are missing ? Or did you only took a part of the log ?A fact is : it all changed here for you :
2019-06-04T14:38:33+08:00 Synology synoups: [UPS] Check Boot Status. 2019-06-04T14:38:33+08:00 Synology synoups: [UPS] Server is going to Safe Mode. It will stop all services and umount all volumes.I know you won't like the next advise : re-install de DSM ...... ;)
-
@Gertjan said in NUT package:
A fact is : it all changed here for you :
2019-06-04T14:38:33+08:00 Synology synoups: [UPS] Check Boot Status. 2019-06-04T14:38:33+08:00 Synology synoups: [UPS] Server is going to Safe Mode. It will stop all services and umount all volumes.This entry in the log indicates that the Synology is waiting to have the power removed and restored.
It's unlikely that the Synology has been sitting in safe mode (non functional) for 75 days. But if it hasn't been rebooted since then, I would certainly reboot it.
-
@dennypage
The DSM was rebooted a lot of times since then. It certainly is not in safe mode because it is being used everyday.@Gertjan
I posted a snippet of the result of the grep but did not skip in between lines, the clock is fine. Reinstalling DSM is my last resort, yes, but I have an open case with Snyology. Let me know if you have more ideas though. -
@kevindd992002 said in NUT package:
more ideas
Yep, a nasty one.
I'll post tomorrow the file upsmon.conf your missing, the one refuses to generate.
You should edit it with your own settings - put in place - make it read only .... and start / restart the 'ups' demon.Here it is : https://pastebin.com/L1mqCb1Y
Without the comments, these are the settings :
RUN_AS_USER root MONITOR ups@192.168.1.1 1 monuser secret slave MINSUPPLIES 1 SHUTDOWNCMD "" NOTIFYCMD /usr/sbin/upssched POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 90 POWERDOWNFLAG /etc/killpower NOTIFYFLAG ONLINE EXEC NOTIFYFLAG ONBATT EXEC NOTIFYFLAG LOWBATT EXEC NOTIFYFLAG NOCOMM EXEC NOTIFYFLAG COMMBAD IGNORE NOTIFYFLAG COMMOK IGNORE NOTIFYFLAG SHUTDOWN IGNORE NOTIFYFLAG FSD EXEC NOTIFYFLAG NOPARENT SYSLOG RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 5My settings :
-
Will Synology write the defaults in the file after restarting the ups daemon? I do have the correct upsmon.conf in etc.defaults/ so I can also use that (if it's the same as yours).
-
@kevindd992002 Given that the Synology isn’t writing the upsmon.conf file correctly, I wouldn’t count on it starting the upsmon service correctly either.
-
@Gertjan said in NUT package:
grep 'ups' /var/log/messages
Right. I'm at a loss here. I'm checking the syslog and messages log again and I do see the last successful connection of the Syno to my UPS NUT master was last 6/4/2019. Here's a more detailed view of the messages log file: https://pastebin.com/bXk7YEWf
-
@kevindd992002 Does "ps -elf" on the Synology show any ups processes running?
-
@dennypage said in NUT package:
@kevindd992002 Does "ps -elf" on the Synology show any ups processes running?
Looks like that's a no: https://pastebin.com/dKDHdg2w
-
@kevindd992002 Just for grins...
Last ditch effort if I owned that Synology...
Disable UPS support on the Synology, reboot the Synology, and then re-enable UPS support on the Synology.
Btw out of curiosity, what model of Synology is it?
-
@dennypage said in NUT package:
@kevindd992002 Just for grins...
Last ditch effort if I owned that Synology...
Disable UPS support on the Synology, reboot the Synology, and then re-enable UPS support on the Synology.
Btw out of curiosity, what model of Synology is it?
Ok, I just did that and checked upsmon.conf and /var/log/messages, same exact results :(
I'm using a DS1817+, so it's a pretty recent model.
-
@kevindd992002 said in NUT package:
Will Synology write the defaults in the file after restarting the ups daemon?
I do not have the command for you how to start upsmon manually, but you'll find it on Google ^^ Like https://diktiosolutions.eu/en/synology/synology-ups-nut-en/
This will not generate the config file : as pfSense, when you start (or activate) it using the GUI all the config files are build,
I was curious : if only the config file building faulted, the process never gets started - but if that file is ok, and you start manually, then that's something that indicated that the GUI is at fault.@kevindd992002 said in NUT package:
I do have the correct upsmon.conf in etc.defaults/ so I can also use that (if it's the same as yours).
It should / could be somewhat different : like another master IP etc.
Strange.
I have nothing in this directoryroot@DiskStation:/etc/defaults# ll total 12 drwxr-xr-x 2 root root 4096 Jul 10 2013 . drwxr-xr-x 51 root root 4096 Aug 20 20:47 .. -rw-r--r-- 1 root root 459 Mar 4 2013 rc.conf -
@Gertjan said in NUT package:
@kevindd992002 said in NUT package:
Will Synology write the defaults in the file after restarting the ups daemon?
I do not have the command for you how to start upsmon manually, but you'll find it on Google ^^ Like https://diktiosolutions.eu/en/synology/synology-ups-nut-en/
This will not generate the config file : as pfSense, when you start (or activate) it using the GUI all the config files are build,
I was curious : if only the config file building faulted, the process never gets started - but if that file is ok, and you start manually, then that's something that indicated that the GUI is at fault.@kevindd992002 said in NUT package:
I do have the correct upsmon.conf in etc.defaults/ so I can also use that (if it's the same as yours).
It should / could be somewhat different : like another master IP etc.
Strange.
I have nothing in this directoryroot@DiskStation:/etc/defaults# ll total 12 drwxr-xr-x 2 root root 4096 Jul 10 2013 . drwxr-xr-x 51 root root 4096 Aug 20 20:47 .. -rw-r--r-- 1 root root 459 Mar 4 2013 rc.confYeah, that makes sense. I think the GUI is at fault here. It's just weird that when I change the UPS IP to an IP that I know is not used, the GUI also errors out, making it like it's connecting properly to the UPS.
It's /usr/syno/etc.defaults/ups
-
On another note, how do I "reset" the battery install date on my UPS for every time I install a new battery? Similar to how PowerChute does it?
-
@kevindd992002 said in NUT package:
On another note, how do I "reset" the battery install date on my UPS for every time I install a new battery? Similar to how PowerChute does it?
Good question.
I used Pan B : I'll hook them up to a PC with run PowerShute, and use that tool to reset the counter.
(otherwise I have to reverse engineer a binary Windows app to see what communication goes over the USB wire .... or read the complete NUTS manual ....)
