[SOLVED] ntopng can't load the page
-
I suspect it, but I review configuration and not seen strange thing, I have 2 pfSense in 2 disticts phisical LAN, recently I seen other pfSense in other LAN (distinct phisical location) allow use protocol http so I installed ntopng package and IT WORKS!!!! … so I must solve in first LAN something of configuration I think because there is still the problem persists and I think because not can use http protocol
-
Finally I have gotten it to work! … I does next steps: 1) Reconfigure webgui protocol with http and port 80 (back I not have put 80, only http) ; 2) Restart pfSense and it works! ; 3) I erased package ntopng ; 4) Restart pfSense ; 5) I installed again package ntopng ; 6) Restart pfSense ; 7) All works!!!!! thank you very much for your interest in my problem!
-
Just reboot pfsense after installing and configuring ntopng.
I just installed ntopng 0.8.6_1 on pfsense 2.3.3-RELEASE-p1.
ntopng times out
Restarted the ntopng service - still times out.
Reboot the pfsense server - ntopng now works.
No configuration changes or firewall rules required.
-
ntop still wont work even after restarting pfsense
this is not solvedanyone else having this problem?
using pfsense
2.4.4-RELEASE-p1 -
So you are seeing exactly the same symptoms?
You should update to 2.4.4p2 but that's probably unrelated.
Steve
-
@stephenw10 said in [SOLVED] ntopng can't load the page:
So you are seeing exactly the same symptoms?
You should update to 2.4.4p2 but that's probably unrelated.
Steve
i did update to
2.4.4-RELEASE-p2now and still same problem..i have restarted ntoppng and even pfsense and the server..still no show
https://forum.netgate.com/post/832233 -
Locking this. If you're seeing some problem with ntopng it's clearly unrelated to whatever issues existed in 2016! I have run ntop without issue many times since then. Please open a new thread detailing exactly what you have tried and what is not working.
Steve
