SG-3100 Very Unstable
-
@m3nt0r123 no problem. Mine has been going down more regularly in the last week or so. Netgate did offer me an RMA, but I don't have another firewall laying around that I can wait over a week for a replacement. I requested a cross ship, and they stopped replying. So, good luck. I will probably just get one of those mini PC units on Amazon, and throw pfsense on it but then I don't really need the SG-3100...
-
Not sure what happened there, I can see your question. I have poked someone to get back to you.
Sorry again!
-
Hi Jim,
is there a stable Version 2.4.5 for the ARM as a patch for teh SG-3100?best regards Thomas
-
There is no version 2.4.5 any longer. There is 2.5.0, which you can upgrade to from 2.4.4-p2. It's still in development, however, and not likely to be stable enough for production use.
-
Hi Jim,
is there a stable Version 2.4.5 for the ARM as a patch for the SG-3100 with the clampd crash problem?best regards Thomas
-
The clamav version recompiled for ARM without optimisations was included from 0.4.44_7.
You should see 0.4.44_8 in 2.4.4p2 so there is no need to run a snapshot if that's what you're looking for.
Steve
-
@stephenw10 Hi Steve,
yes this is correct 0.4.44_8 is running, but still the clamd stops several times a day => squid is unstable …
best regards Thomas -
With the same logs? signal 10 for clamd?
-
@stephenw10 Hi Steve,
yes with Signal 10!
best regard Thomas -
Any other logs we can work with?
I have noted it on our internal bug tracker. It seems unlikely there would have been a regression but I'll check.
Steve
