Pfsense, No internet when it is said "You are connected".

stephenw10

Yes you should be able to define hosts that are allowed before logging in there.

Can you reach https://fonts.googleapis.com/css?family=Open+Sans directly from a client before logging in?

Edit: Missed replies on next page.

Steve

andresense

Hello,

I don't know if my problem is the same as that being listed on this list but ...

I'm having it when pfsense returns from a restart. Users who had authenticated before the restart cannot navigate or authenticate after the restart of the restart pfsense ...

I performed the patch above but nothing

Debug:

[2.4.4-RELEASE][root@pfSense.localdomain]/root: ipfw table portal_test_auth_up list
--- table(portal_test_auth_up), set(0) ---
[2.4.4-RELEASE][root@pfSense.localdomain]/root: ipfw table portal_test_auth_down list
--- table(portal_test_auth_down), set(0) ---

sqlite3 /var/db/captiveportalportal_teste.db --line "select * from captiveportal"
allow_time = 1579787905
pipeno = 2000
ip = 10.2.0.4
mac = a1:dd:aa:6b:bb:cc
username = helmet
sessionid = b4d27f77b0c2b79a
bpassword =
session_timeout =
idle_timeout =
session_terminate_time =
interim_interval =
traffic_quota =
authmethod = Local Auth
context = first

Patch can NOT be applied cleanly (detail):

/usr/bin/patch --directory=/ -t -p2 -i /var/patches/5e29a0f922717.patch --check --forward --ignore-whitespace

Hmm... Looks like a unified diff to me...
The text leading up to this was:

|diff --git a/src/etc/inc/captiveportal.inc b/src/etc/inc/captiveportal.inc
|index 453b4f02950..152effd9243 100644
|--- a/src/etc/inc/captiveportal.inc

+++ b/src/etc/inc/captiveportal.inc
Patching file etc/inc/captiveportal.inc using Plan A...
Ignoring previously applied (or reversed) patch.
Hunk #1 ignored at 235.
Hunk #2 ignored at 600.
Hunk #3 ignored at 645.
Hunk #4 ignored at 697.
Hunk #5 ignored at 747.
Hunk #6 ignored at 755.
Hunk #7 ignored at 786.
Hunk #8 ignored at 1310.
Hunk #9 ignored at 1441.
Hunk #10 ignored at 1924.
Hunk #11 ignored at 1941.
Hunk #12 ignored at 1981.
Hunk #13 ignored at 1992.
Hunk #14 ignored at 2003.
Hunk #15 ignored at 2014.
Hunk #16 ignored at 2450.
16 out of 16 hunks ignored while patching etc/inc/captiveportal.inc
Hmm... The next patch looks like a unified diff to me...
The text leading up to this was:

|diff --git a/src/etc/inc/system.inc b/src/etc/inc/system.inc
|index 6d6f33161cb..7e4deb8b326 100644
|--- a/src/etc/inc/system.inc

+++ b/src/etc/inc/system.inc
Patching file etc/inc/system.inc using Plan A...
Hunk #1 succeeded at 2180 with fuzz 2 (offset 60 lines).
Hmm... The next patch looks like a unified diff to me...
The text leading up to this was:

|diff --git a/src/usr/local/captiveportal/index.php b/src/usr/local/captiveportal/index.php
|index d5459a80976..44bf0879b32 100644
|--- a/src/usr/local/captiveportal/index.php

+++ b/src/usr/local/captiveportal/index.php
Patching file usr/local/captiveportal/index.php using Plan A...
Ignoring previously applied (or reversed) patch.
Hunk #1 ignored at 198.
1 out of 1 hunks ignored while patching usr/local/captiveportal/index.php
done

Patch can be reverted cleanly (detail):

/usr/bin/patch --directory=/ -f -p2 -i /var/patches/5e29a0f922717.patch --check --reverse --ignore-whitespace

Hmm... Looks like a unified diff to me...
The text leading up to this was:

|diff --git a/src/etc/inc/captiveportal.inc b/src/etc/inc/captiveportal.inc
|index 453b4f02950..152effd9243 100644
|--- a/src/etc/inc/captiveportal.inc

+++ b/src/etc/inc/captiveportal.inc
Patching file etc/inc/captiveportal.inc using Plan A...
Hunk #1 succeeded at 235.
Hunk #2 succeeded at 573 (offset -27 lines).
Hunk #3 succeeded at 618 (offset -27 lines).
Hunk #4 succeeded at 670 (offset -27 lines).
Hunk #5 succeeded at 716 (offset -27 lines).
Hunk #6 succeeded at 724 (offset -27 lines).
Hunk #7 succeeded at 755 (offset -27 lines).
Hunk #8 succeeded at 1298 (offset -4 lines).
Hunk #9 succeeded at 1406 (offset -27 lines).
Hunk #10 succeeded at 1912 (offset -4 lines).
Hunk #11 succeeded at 1906 (offset -27 lines).
Hunk #12 succeeded at 1965 (offset -4 lines).
Hunk #13 succeeded at 1953 (offset -27 lines).
Hunk #14 succeeded at 1987 (offset -4 lines).
Hunk #15 succeeded at 1975 (offset -27 lines).
Hunk #16 succeeded at 2421 (offset -17 lines).
Hmm... The next patch looks like a unified diff to me...
The text leading up to this was:

|diff --git a/src/etc/inc/system.inc b/src/etc/inc/system.inc
|index 6d6f33161cb..7e4deb8b326 100644
|--- a/src/etc/inc/system.inc

+++ b/src/etc/inc/system.inc
Patching file etc/inc/system.inc using Plan A...
Hunk #1 succeeded at 2126 with fuzz 2 (offset 6 lines).
Hmm... The next patch looks like a unified diff to me...
The text leading up to this was:

|diff --git a/src/usr/local/captiveportal/index.php b/src/usr/local/captiveportal/index.php
|index d5459a80976..44bf0879b32 100644
|--- a/src/usr/local/captiveportal/index.php

+++ b/src/usr/local/captiveportal/index.php
Patching file usr/local/captiveportal/index.php using Plan A...
Hunk #1 succeeded at 198.
done

free4

@andresense 2.4.4-RELEASE?

The patch is designed to be applied to the 2.4.4-p3

andresense

@free4 Sorry
The version I'm using is 2.4.4-p3

Gertjan

@Gertjan said in Pfsense, No internet when it is said "You are connected".:

https://github.com/pfsense/pfsense/compare/RELENG_2_4_4...Augustin-FL:fix-reconfig-for-2-4-4.diff

I just installed that patch on my Home pfSense :
Fill in the minimal patch info : a description and the URL - nothing more :

The hit the Save at the bottom of the page.

Do what must be done : Hit Fetch.

The patch is loaded :

Now hit Test :

As you can see : the pachh can be applied.

So, hit Apply.

This works for a clean :

If it can't be applied : one or more files are NOT original 2.4.4-p3 .....

andresense

Sorry for the delay in replying

I solved the problem in another way. I created a script that inserted users back into the portal at boot time.

Thanks for the feedback

michaeleino

So, as this issue becomes a nightmare for us and wasn't fixing by any patch :(

now, what the case with 2.4.5 ? I can hit the same issue after every reboot.
I can't apply the patch to 2.4.5, and not sure what to do now to keep using the pfsense CP !!

Any help please?
Thanks

stephenw10

Try: https://github.com/pfsense/pfsense/compare/RELENG_2_4_5...Augustin-FL:fix-reconfig-for-2-4-4.diff

That will apply against 2.4.5 and looks exactly the same patch. I have no way to test it here though right now.

Steve

Gertjan

@stephenw10 said in Pfsense, No internet when it is said "You are connected".:

Try: https://github.com/pfsense/pfsense/compare/RELENG_2_4_5...Augustin-FL:fix-reconfig-for-2-4-4.diff

That will apply against 2.4.5 and looks exactly the same patch. I have no way to test it here though right now.

Steve

I'm still using this patch as of today - now running 2.4.5. - it auto applied itself right after updating.
The patch applies well because the files changed by the patch were not modified since 2.4.4-p3.

@michaeleino said in Pfsense, No internet when it is said "You are connected".:

I can't apply the patch to 2.4.5,

Make sure the original files (edit : 2.4.4-p3 or 2.4.5) are in place.

@michaeleino said in Pfsense, No internet when it is said "You are connected".:

and not sure what to do now to keep using the pfsense CP !!

Don't forget the most easy solution : don't edit portal settings while users are connected.
And if you have to edit settings, disconnect them all right afterwards.

michaeleino

well,
thanks Steve, Gertjan
now I can patch 2.4.5,
Now should I change any settings in the CP ?
as after each reboot, I still hit the "You are connected" :(

@Gertjan said in Pfsense, No internet when it is said "You are connected".:

Don't forget the most easy solution : don't edit portal settings while users are connected.
And if you have to edit settings, disconnect them all right afterwards.

the issue doesn't happen if i modify the CP configuration... it happens after every reboot.

Gertjan

@michaeleino said in Pfsense, No internet when it is said "You are connected".:

as after each reboot, I still hit the "You are connected" :(

The patch enforces that the database with connected users is deleted at boot time.
The related pipe-rule list is also deleted.
See /etc/inc/system.inc - lines 21345-2137 after the patch is applied.

The GUI Status > Captive Portal > YOURZONE should be empty after a pfSense rebooting.
Right ?

Now, you enter a user on the portal.
You are connected - right ? The user shows up in the GUI Status > Captive Portal > YOURZONE, right ?
Is that the moment you see You are connected", right after identification ?

michaeleino

Hello, i was just unable to reboot the firewall since last time :)
the issue has been magically gone, the captive portal status page is empty after reboot, so the users is able to re-authenticate again.

Hope this patch be included in the next release!
Thanks all

michaeleino

Hi All!
got the magic...
reboot/halt from pfsense GUI is OK,
The GUI Status > Captive Portal > ZONE is empty after a pfSense rebooting.

but reboot/shutdown from acpi is NOT OK
The GUI Status > Captive Portal > Old auth sessions are still there... very weird, as acpi should trigger the same runtime cycle!

VM hosted on bhyve/freenas 11.3U2.1
Virtual CPUs:8
Memory Size:8.00 GiB
Boot Loader Type:UEFI
System Clock:UTC

the issue originally, when we suffer a power outage and the UPS will not survive anymore, the Host OS is doing a clean shutdown for VMs then to itself, and after power return everything should come back again...
except this captive portal :(

any help ? Does it clean sessions on startup or shutoff ?

Gertjan

@michaeleino said in Pfsense, No internet when it is said "You are connected".:

the Host OS is doing a clean shutdown for VMs then to itself,

The question is : is it halting ?

See /etc/inc/system.inc - aroujd lin e2094 : on system_halt() system_reboot_cleanup() is called.
An that function, a couple of line further bellow, will delete the portal session database(s).

It plays also the shutdown notification sound

	mwexec("/usr/local/bin/beep.sh stop");

If the host puts the VM in some sort of suspended or sleep mode, all this might no happen.
Check the logs if it really shuts down.

Put a log line in the function system_reboot_cleanup() so you can check if it is reached, if the database is wiped, etc.

michaeleino

Hi all!
I have tried to add echo message inside each function, to see it while execution .. but i can't see them on any shutdown procedure neither "acpi" nor "pfsense halt"
for ex:

function system_halt() {
        global $g;
        echo "Hey, This is a system halting process";
        system_reboot_cleanup();
 
        mwexec("/usr/bin/nohup /etc/rc.halt > /dev/null 2>&1 &");
}

should I redirect it to console like this or what?

>/dev/console

something to note, "acpi" or "pfsense halt" is showing this on the console:
Screenshot from 2020-05-02 19-35-29.png

and pfsense is starting cleanly after both shutdowns ... can we execute this cleanup during Bootup ? is it better idea ?

Gertjan

The several shutdown functions that exist in /etc/system.inc have to be called for pfSense maintenance purposes.

I tend to say : redo your ACPI (bios ?) settings.

michaeleino

Can't get your message :(
I'm using the UEFI boot loader, what BIOS should I check ?

I have other virtual machines like ubuntu/windows, they are going to perform soft shutdown normally.

chanrio13

@andresense

can you share a script on how to do this on boot time? been seeing this issue in the past 4 releases of pf and it seems its not gonna be included in the next release at all but a patch.

andresense

@chanrio13

dude i don't know if the solution i made will work for you

What I did was check if the user's mac address is in the database and on the firewall, if it is only in the database, I remove it from the database
and the captive is shown to him again

this is for you?

Novacom

Hello !

I'm trying to understand this issue I have with captive portal users being left stuck in "you're connected" after a pfSense reboot. Clearly this have been an issue for which patches have been made until 2.5 arrives (master).

@stephenw10 said in Pfsense, No internet when it is said "You are connected".:

https://github.com/pfsense/pfsense/compare/RELENG_2_4_5...Augustin-FL:fix-reconfig-for-2-4-4.diff

The patch does not seems to download anymore.

Here are some info and what I tried :

I'm on 2.4.5-RELEASE-p1
I did not change the Captive Portal config after initial reboot.
Log into Portal, browse fine, all OK, reboot pfSense, "you're connected" but in fact firewalled.
https://github.com/pfsense/pfsense/pull/4042.diff Fetches but do not apply (fails at line 1954)
https://github.com/pfsense/pfsense/compare/RELENG_2_4_4...Augustin-FL:fix-reconfig-for-2-4-4.diff does not fetch
https://github.com/pfsense/pfsense/compare/RELENG_2_4_5...Augustin-FL:fix-reconfig-for-2-4-4.diff does not fetch
@andresense's script could fix it quickly for me, as I could live with removing connected users at reboot but as I digged through the rabbit hole of this thread, the patch does this.

Thank you for any pointers for me...

Pfsense, No internet when it is said "You are connected".

Hmm... Looks like a unified diff to me... The text leading up to this was:

Hmm... Looks like a unified diff to me... The text leading up to this was:

Hmm... Looks like a unified diff to me...
The text leading up to this was:

Hmm... Looks like a unified diff to me...
The text leading up to this was: