Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Wificalling - 2.4.4-RELEASE-p1

    Documentation
    2
    2
    690
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mauric
      last edited by

      Hello
      I have a strange error with me wificalling and i don't know if this are Firewall problem…… if callfrom me first cellular me second cellular "Calling A -> B" in the same LAN it's appair that the caller can't be reach…. if leaving the LAN the Transfer will be correct running, both cellular are IPhone. if calling from LAN with wificalling any other public phone, this will running without any problem.

      on Pfsense i have port 4500UDP/500UDP open
      also for test i configured NAT from external to internal IP

      without success…… can help me here any one?
      Regards

      1 Reply Last reply Reply Quote 0
      • DerelictD
        Derelict LAYER 8 Netgate
        last edited by

        Should not need anything special on the firewall, other than static outbound on UDP 500 which is the default configuration. Your phone should make an OUTBOUND IPsec connection and do all the wifi calling bits over that.

        Chattanooga, Tennessee, USA
        A comprehensive network diagram is worth 10,000 words and 15 conference calls.
        DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
        Do Not Chat For Help! NO_WAN_EGRESS(TM)

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.