pfSense on Watchguard M370
-
@it-adminpmaria-santcugat-org for safety measures I suggest you to install and configure everything without the module, then you plug it in and configure the extra ports. Safety measures first
-
Adding the module will change the NIC order if you have already assigned them.
-
@nicknitro Bad news, when you start without the module and put the module later, the mapping of the interfaces change to the schema that I show you later.
-
Yup.
-
@stephenw10 Oh, I see..... well, maybe there's a file to rewrite the modules order, perhaps a init script or similar to automate the process.
-
There is one thing you can do. You can add PCI device wiring hints:
https://man.freebsd.org/cgi/man.cgi?query=pci#DEVICE_WIRING
Doing that you can specify the NIC order by the PCI bus location which doesn't change.However I don't recommend doing that. If you lose the custom values (which are not stored in the config) the NICs will be parsed in a completely different order. Better in my opinion to just use the default order and put up with the unexpected NIC sequence.
-
Hello
Original m370 bios can support cpu intel 7th Generation ? -
@kapook00789 said in pfSense on Watchguard M370:
Hello
Original m370 bios can support cpu intel 7th Generation ?The best CPU to use is an Intel Core i7-7700T. It’s fast, multithreaded and only 35W TDP. (QC/8MB/8T/2.9GHz/35W).
As for the original BIOS, as in if you've never run WatchGuard XTM software on it and upgraded, then that I'm not sure. -
@Squuiid said in pfSense on Watchguard M370:
The best CPU to use is an Intel Core i7-7700T. It’s fast, multithreaded and only 35W TDP. (QC/8MB/8T/2.9GHz/35W).
Still surprisingly expensive though. I'd argue the 7500T is better value. Potentially much better depending on how cheap you can find one.
-
@HangmansNoose001380 Hi, I've got an M470 and would like to replace the bios to an unlocked one. Would you please send me the download link? Thank you!
-
@HangmansNoose001380 may i have m470 bios, because i changed cpu to xeon e3 1260l v5, i want to release the speedstep
thank you!
-
Admin edit: Please don't post the password directly here.
-
Can anyone DM me the unlock password bios please?
BigThx
-
@angelroc do always read a thread before posting. It’s there in plain sight.
https://forum.netgate.com/post/1067389 -
A Anteater4341 referenced this topic on
-
hey all, i have seen/know the password but does anyone have a copy of the mod/unlocked bios? I really want to flash a m470 and enable speedstep. any information is greatly appreciated!
all the best
-
Same here. Got a M670 for free and want to enable speedstep.
-
You should see speedshift active on there already if the CPU supports it. Pretty sure the default CPU in the M670 does. That's superior to speedstep in almost every way.
