Frr with get two BGP full route tables from Neighbors with openvpn Update Source
-
i test find this frr with openvpn happen issue, when frr use two ipv6 BGP Neighbors with openvpn Update Source , then the issue will happen.
https://redmine.pfsense.org/issues/9795?issue_count=4&issue_position=1&next_issue_id=7637
i need edit this, when frr got two or more and ipv4 or ipv6 full route tables from neighbors via two openvpn update Source, then frr will pfsense down.
-
<118>External config loader 1.0 is now starting... ada0s1 ada0s1a ada0s1b
<118>Launching the init system...Updating CPU Microcode...
CPU: AMD Athlon(tm) II X4 631 Quad-Core Processor (2599.90-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x300f10 Family=0x12 Model=0x1 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
SVM: NP,NRIP,NAsids=64
TSC: P-state invariant, performance statistics
<118>Done.
<118>Could not open /dev/crypto: No such file or directory
<118>...... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
<118>done.
<118>Loading configuration......done.
<118>Could not open /dev/crypto: No such file or directory
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...sysctl: net.inet.tcp.cc.algorithm=htcp: No such process
<118>sysctl: net.inet.tcp.cc.algorithm=htcp: No such process
<118>done.
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...
<6>lagg0: IPv6 addresses on igb0 have been removed before adding it as a member to prevent IPv6 address scope violation.
<6>lagg0: link state changed to DOWN
<6>lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation.
<118>done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.2'
<118>done.
<118>Configuring QinQ interfaces...done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring WAN interface...
<6>ng0: changing name to 'pppoe0'
<6>igb0: link state changed to UP
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>igb2: link state changed to UP
<118>done.
<118>Configuring LAN interface...done.
<118>Configuring WAN2 interface...
<6>ng1: changing name to 'pppoe2'
<6>igb3: link state changed to UP
<6>lagg0: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun7: changing name to 'ovpnc7'
<118>Could not open /dev/crypto: No such file or directory
<6>tun3: changing name to 'ovpnc3'
<118>Could not open /dev/crypto: No such file or directory
<6>tun9: changing name to 'ovpnc9'
<118>Could not open /dev/crypto: No such file or directory
<6>tun10: changing name to 'ovpnc10'
<118>Could not open /dev/crypto: No such file or directory
<6>tun11: changing name to 'ovpnc11'
<118>Could not open /dev/crypto: No such file or directory
<118>done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP time client...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall......done.
<118>Generating RRD graphs...done.
<118>Starting UPnP service... done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>>>> Removing unnecessary packages... done.
<118>>>> Cleanup pkg cache... done.
<118> Starting package System Patches...done.
<118> Starting package Shellcmd...done.
<118> Starting package Cron...done.
<118> Starting package acme...done.
<118> Starting package iftop...done.
<118> Starting package sudo...done.
<118> Starting package Service Watchdog...done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package Notes...done.
<118> Starting package LADVD...done.
<118> Starting package FRR...done.
<118>Could not open /dev/crypto: No such file or directory
<118>pfSense 2.5.0-DEVELOPMENT amd64 Wed Oct 30 00:02:58 EDT 2019
<118>Bootup complete
<6>ovpnc7: link state changed to UP
<6>gif4: link state changed to DOWN
<6>gif4: link state changed to UP
<6>ovpnc10: link state changed to UP
<6>ovpnc11: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc10: link state changed to DOWN
<6>gif0: link state changed to DOWN
<6>gif0: link state changed to UP
<6>ovpnc7: link state changed to UP
<6>ovpnc10: link state changed to UP
<6>ovpnc11: link state changed to DOWN
<6>ovpnc3: link state changed to UP
<6>ovpnc9: link state changed to UP
<6>ovpnc3: link state changed to DOWN
<6>ovpnc9: link state changed to DOWN
<6>ovpnc3: link state changed to UP
<6>ovpnc9: link state changed to UP
<6>ovpnc11: link state changed to UP
<3>rn_delete: couldn't find our annotationFatal trap 12: page fault while in kernel mode
cpuid = 3; apic id = 03
fault virtual address = 0x70
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e6cbf1
stack pointer = 0x28:0xfffffe004e074560
frame pointer = 0x28:0xfffffe004e074660
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 36256 (Zebra dplane)
version.txt0600007113556304170 7535 ustarrootwheelFreeBSD 12.0-RELEASE-p10 c3500d32cc9(RELENG_2_5) pfSense -
That could be from the RADIX_MPATH / multipath options we enabled in the kernel and FRR on 2.5.0 to allow for multi-path/ECMP routing. It's entirely possible the code doesn't work as well as it should, since it's not as heavily tested.
Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!
Need help fast? Netgate Global Support!
Do not Chat/PM for help!
-
Update Source use gre or gif system not down, only with openvpn Update Source system down.
-
CPU: AMD Athlon(tm) II X4 631 Quad-Core Processor (2599.91-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x300f10 Family=0x12 Model=0x1 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
SVM: NP,NRIP,NAsids=64
TSC: P-state invariant, performance statistics
<118>Done.
<118>...... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
<118>done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...sysctl: net.inet.tcp.cc.algorithm=htcp: No such process
<118>sysctl: net.inet.tcp.cc.algorithm=htcp: No such process
<118>done.
padlock0: No ACE support.
aesni0: No AES or SHA support.
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...
<6>lagg0: IPv6 addresses on igb0 have been removed before adding it as a member to prevent IPv6 address scope violation.
<6>lagg0: link state changed to DOWN
<6>lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation.
<118>done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.2'
<118>done.
<118>Configuring QinQ interfaces...done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring WAN interface...
<6>ng0: changing name to 'pppoe0'
<6>igb0: link state changed to UP
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>igb2: link state changed to UP
<118>done.
<118>Configuring LAN interface...done.
<118>Configuring WAN2 interface...
<6>ng1: changing name to 'pppoe2'
<6>lagg0: link state changed to UP
<6>igb3: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun7: changing name to 'ovpnc7'
<6>tun3: changing name to 'ovpnc3'
<6>tun9: changing name to 'ovpnc9'
<6>tun10: changing name to 'ovpnc10'
<6>tun11: changing name to 'ovpnc11'
<118>done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP time client...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall......done.
<6>gif4: link state changed to DOWN
<6>gif4: link state changed to UP
<118>Generating RRD graphs...done.
<118>Starting UPnP service... done.
<6>gif0: link state changed to DOWN
<6>gif0: link state changed to UP
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>>>> Removing unnecessary packages... done.
<118>>>> Cleanup pkg cache... done.
<118> Starting package System Patches...done.
<118> Starting package Shellcmd...done.
<118> Starting package Cron...done.
<118> Starting package acme...done.
<118> Starting package iftop...done.
<118> Starting package sudo...done.
<118> Starting package Service Watchdog...done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package LADVD...done.
<118> Starting package FRR...done.
<118> Starting package Backup...done.
<118> Starting package Filer...done.
<118> Starting package mtr-nox11...done.
<118>pfSense 2.5.0-DEVELOPMENT amd64 Thu Oct 31 22:30:54 EDT 2019
<118>Bootup complete
<6>ovpnc3: link state changed to UP
<6>ovpnc7: link state changed to UP
<6>ovpnc10: link state changed to UP
<6>ovpnc11: link state changed to UP
<6>ovpnc9: link state changed to UP
<3>rn_delete: couldn't find our annotationFatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x70
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e6cbf1
stack pointer = 0x28:0xfffffe00507ce560
frame pointer = 0x28:0xfffffe00507ce660
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 79695 (Zebra dplane)
version.txt0600007113557107227 7542 ustarrootwheelFreeBSD 12.0-RELEASE-p10 42c493096e7(RELENG_2_5) pfSense -
amd64
12.0-RELEASE-p10
FreeBSD 12.0-RELEASE-p10 fe839027797(RELENG_2_5) pfSenseCrash report details:
No PHP errors found.
Filename: /var/crash/info.0
Dump header from device: /dev/label/swap0
Architecture: amd64
Architecture Version: 4
Dump Length: 156160
Blocksize: 512
Compression: none
Dumptime: Wed Nov 6 03:31:05 2019
Hostname:
Magic: FreeBSD Text Dump
Version String: FreeBSD 12.0-RELEASE-p10 fe839027797(RELENG_2_5) pfSense
Panic String:
Dump Parity: 3303730181
Bounds: 0
Dump Status: goodFilename: /var/crash/textdump.tar.0
ddb.txt06000014000013560346771 7106 ustarrootwheeldb:0:kdb.enter.default> run lockinfo
db:1:lockinfo> show locks
No such command; use "help" to list available commands
db:1:lockinfo> show alllocks
No such command; use "help" to list available commands
db:1:lockinfo> show lockedvnods
Locked vnodes
db:0:kdb.enter.default> show pcpu
cpuid = 0
dynamic pcpu = 0xb45ac0
curthread = 0xfffff8002e69a580: pid 76595 tid 101161 "Zebra dplane"
curpcb = 0xfffffe00506d3cc0
fpcurthread = 0xfffff8002e69a580: pid 76595 "Zebra dplane"
idlethread = 0xfffff8000432c000: tid 100003 "idle: cpu0"
curpmap = 0xfffff8002e17e130
tssp = 0xffffffff82db7420
commontssp = 0xffffffff82db7420
rsp0 = 0xfffffe00506d3cc0
gs32p = 0xffffffff82dbe058
ldt = 0xffffffff82dbe098
tss = 0xffffffff82dbe088
curvnet = 0xfffff80004089380
db:0:kdb.enter.default> bt
Tracing pid 76595 tid 101161 td 0xfffff8002e69a580
rtrequest1_fib() at rtrequest1_fib+0x2b1/frame 0xfffffe00506d3660
route_output() at route_output+0xc61/frame 0xfffffe00506d38e0
sosend_generic() at sosend_generic+0x586/frame 0xfffffe00506d3990
sosend() at sosend+0x50/frame 0xfffffe00506d39c0
soo_write() at soo_write+0x33/frame 0xfffffe00506d3a00
dofilewrite() at dofilewrite+0xb2/frame 0xfffffe00506d3a50
sys_write() at sys_write+0xc3/frame 0xfffffe00506d3ac0
amd64_syscall() at amd64_syscall+0x369/frame 0xfffffe00506d3bf0
fast_syscall_common() at fast_syscall_common+0x101/frame 0xfffffe00506d3bf0
--- syscall (4, FreeBSD ELF64, sys_write), rip = 0x8006deb0a, rsp = 0x7fffdfffd788, rbp = 0x7fffdfffd7c0 ---
db:0:kdb.enter.default> ps
pid ppid pgrp uid state wmesg wchan cmd
76846 1 76846 0 Ss (threaded) bgpd
100872 S select 0xfffff8000b3b5340 bgpd
101162 S select 0xfffff8000b2ec4c0 bgpd_io
101163 S uwait 0xfffff8002e3c3800 bgpd_ka
76595 1 76595 0 Rs (threaded) zebra
100169 Run CPU 2 zebra
101161 Run CPU 0 Zebra dplane
101164 S select 0xfffff8000b3c88c0 zebra_apic
101165 S select 0xfffff8004d2de5c0 zebra_apic
53349 1 811 0 S nanslp 0xffffffff82b31d53 php-cgi
35560 6757 811 0 S nanslp 0xffffffff82b31d51 sleep
91986 91512 91512 142 S kqread 0xfffff80006ff2300 ladvd
91512 1 91512 0 Ss kqread 0xfffff8000be81100 ladvdmsgbuf.txt06000027767013560346771 7670 ustarrootwheelet: Network is unreachable
<118>route: route has not been found
<118>route: writing to routing socket: Network is unreachable
<118>route: route has not been found<118>Configuring LAGG interfaces...
<6>lagg0: IPv6 addresses on igb0 have been removed before adding it as a member to prevent IPv6 address scope violation.
<6>lagg0: link state changed to DOWN
<6>lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation.Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x70
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e7d451
stack pointer = 0x28:0xfffffe00506d3560
frame pointer = 0x28:0xfffffe00506d3660
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 76595 (Zebra dplane)
version.txt0600007113560346771 7545 ustarrootwheelFreeBSD 12.0-RELEASE-p10 fe839027797(RELENG_2_5) pfSense -
@jimp when your will fix it?
-
There isn't enough information to say what exactly is wrong yet, and we haven't been able to reproduce any crashes here so far. So there is no ETA on a fix.
2.5.0 is under development, it's not expected to be stable at this point.
Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!
Need help fast? Netgate Global Support!
Do not Chat/PM for help!
-
@jimp That could be from the RADIX_MPATH / multipath options we enabled in the kernel and FRR on 2.5.0 to allow for multi-path/ECMP routing. It's entirely possible the code doesn't work as well as it should, since it's not as heavily tested.
maybe should check this.
-
i had try use frr vtysh shell add two openvpn ipv6 address , it still down too. So i think the pf frr with openvpn has bug.
-
@jimp said in Frr with use two ipv6 BGP Neighbors openvpn Update Source:
There isn't enough information to say what exactly is wrong yet, and we haven't been able to reproduce any crashes here so far. So there is no ETA on a fix.
2.5.0 is under development, it's not expected to be stable at this point.
your try frr get two ipv6 full table upstream. why only has one ipv6 upstream is normal work.
-
@jimp i try setup use openbgpd normarl work ipv6 with openvpn. so i think the frr sure has bugs.
-
frr v7.2 is out, we need for upgrade?
-
<118>Configuring LAGG interfaces...
<6>lagg0: IPv6 addresses on igb0 have been removed before adding it as a member to prevent IPv6 address scope violation.
<6>lagg0: link state changed to DOWN
<6>lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation.
<118>done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.2'
<118>done.
<118>Configuring QinQ interfaces...done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring WAN interface...
<6>ng0: changing name to 'pppoe0'
<6>igb2: link state changed to UP
<6>igb0: link state changed to UP
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<118>done.
<118>Configuring LAN interface...done.
<118>Configuring WAN2 interface...
<6>ng1: changing name to 'pppoe2'
<6>igb3: link state changed to UP
<6>lagg0: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun7: changing name to 'ovpnc7'
<6>tun3: changing name to 'ovpnc3'
<6>tun9: changing name to 'ovpnc9'
<6>tun10: changing name to 'ovpnc10'
<6>tun11: changing name to 'ovpnc11'
<118>done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP time client...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall......done.
<6>gif4: link state changed to DOWN
<6>gif4: link state changed to UP
<118>Generating RRD graphs...done.
<118>Starting UPnP service... done.
<6>gif0: link state changed to DOWN
<6>gif0: link state changed to UP
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>>>> Removing unnecessary packages... done.
<118>>>> Cleanup pkg cache... done.
<118> Starting package Shellcmd...done.
<118> Starting package Cron...done.
<118> Starting package Backup...done.
<118> Starting package Filer...done.
<118> Starting package LADVD...done.
<118> Starting package iftop...done.
<118> Starting package mtr-nox11...done.
<118> Starting package RRD Summary...done.
<118> Starting package Service Watchdog...done.
<118> Starting package Notes...done.
<118> Starting package OpenBGPD...done.
<118> Starting package acme...done.
<118> Starting package Traffic Totals...done.
<118> Starting package System Patches...done.
<118> Starting package sudo...done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package iperf...done.
<118> Starting /usr/local/etc/rc.d/bgpd.sh...done.
<118>pfSense 2.5.0-DEVELOPMENT amd64 Thu Nov 21 21:28:02 EST 2019
<118>Bootup complete
<6>ovpnc7: link state changed to UP
<6>ovpnc10: link state changed to UP
<6>ovpnc3: link state changed to UP
<6>ovpnc11: link state changed to UP
<6>ovpnc9: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc3: link state changed to DOWN
<6>ovpnc3: link state changed to UP
<6>ovpnc3: link state changed to DOWN
<6>ovpnc9: link state changed to DOWN
<6>ovpnc9: link state changed to UP
<6>ovpnc3: link state changed to UP
<6>re0: link state changed to DOWN
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<3>rn_delete: Orphaned Mask 0xfffff801c10ab060 at 0
<3>rn_delete: Orphaned Mask 0xfffff803c6d3b320 at 0
<3>rn_delete: Orphaned Mask 0xfffff8042a4741a0 at 0
<3>rn_delete: Orphaned Mask 0xfffff803c6e202c0 at 0
<3>rn_delete: Orphaned Mask 0xfffff801c0875a80 at 0
<3>rn_delete: couldn't find our annotationFatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 11
fault virtual address = 0x70
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e7d451
stack pointer = 0x28:0xfffffe0095ab53c0
frame pointer = 0x28:0xfffffe0095ab54c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 64872 (bgpd)
version.txt0600007113566056012 7535 ustarrootwheelFreeBSD 12.0-RELEASE-p10 fe839027797(RELENG_2_5) pfSense -
<118> Starting package Service Watchdog...done.
<118> Starting package Notes...done.
<118> Starting package System Patches...done.
<118> Starting package iperf...done.
<118> Starting package FRR...done.
<118>pfSense 2.5.0-DEVELOPMENT amd64 Fri Nov 29 08:22:22 EST 2019
<118>Bootup complete
<6>ovpnc11: link state changed to UP
<6>ovpnc9: link state changed to UP
<6>ovpnc3: link state changed to UP
<6>ovpnc10: link state changed to UP
<6>ovpnc7: link state changed to UP
<3>rn_delete: couldn't find our annotationFatal trap 12: page fault while in kernel mode
cpuid = 3; apic id = 13
fault virtual address = 0x70
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e7d451
stack pointer = 0x28:0xfffffe00944f43a0
frame pointer = 0x28:0xfffffe00944f44a0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 53160 (Zebra dplane)
version.txt0600007113570412703 7533 ustarrootwheelFreeBSD 12.0-RELEASE-p10 fe839027797(RELENG_2_5) pfSense -
i need edit this, when frr got two or more and ipv4 or ipv6 full route tables from neighbors via openvpn update Source, then frr will down.
-
The results of repeated tests should be that there is a problem with the system, which has an impact on multiple BGP software, but it has the greatest impact on frr, causing the system to be paralyzed.
-
i have to change back to pf 2.4.4-p3, this version bgp work normal. so i think pfsense 2.5 has bugs now.
-
report
-
use openbgpd get the same issue.
