X722

LeeR

I have a Supermicro X11SDV-4C-TP8F motherboard with 4x10Gb onboard NICS via Intel X722. I'm unable to get dpdk to take over those NICs. Tried switching uio drivers w/o luck. Running 19.08.

lspci
0b:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
0b:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
0d:00.0 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GBASE-T (rev 04)
0d:00.1 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GBASE-T (rev 04)
0d:00.2 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GbE SFP+ (rev 04)
0d:00.3 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GbE SFP+ (rev 04)
1d:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
1d:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)


vpp# show pci 
Address      Sock VID:PID     Link Speed   Driver          Product Name                    Vital Product Data
0000:0b:00.0      8086:10fb   5.0 GT/s x32 ixgbe                                           
0000:0b:00.1      8086:10fb   5.0 GT/s x32 ixgbe                                           
0000:0d:00.0      8086:37d2   5.0 GT/s x32                 Example VPD                     RV: 0x d7
0000:0d:00.1      8086:37d2   5.0 GT/s x32 i40e            Example VPD                     RV: 0x d7
0000:0d:00.2      8086:37d0   5.0 GT/s x32 i40e            Example VPD                     RV: 0x d7
0000:0d:00.3      8086:37d0   5.0 GT/s x32 i40e            Example VPD                     RV: 0x d7
0000:1d:00.0      8086:10fb   5.0 GT/s x32 ixgbe                                           
0000:1d:00.1      8086:10fb   5.0 GT/s x32 ixgbe                                           


cat /etc/vpp/startup.conf
# This file is automatically generated.
# Any changes will be overwritten.
# last generated 2019-11-19 13:53:18 -0600

unix {
    nodaemon
    log /tmp/vpp.log
    full-coredump
    cli-listen /run/vpp/cli.sock
    gid vpp
}

api-trace {
    on
}

api-segment {
    gid vpp
}

statseg {
    socket-name /run/vpp/stats.sock
    size 96M
    per-node-counters off
}

dpdk {
    uio-driver vfio-pci
    dev 0000:0d:00.0 {
        name te0d.0
    }

}

nat {
    endpoint-dependent
}



vpp# show interface 
              Name               Idx    State  MTU (L3/IP4/IP6/MPLS)     Counter          Count     
local0                            0     down          0/0/0/0

dennis_s

Any way you could share how your startup.conf is setup? The X722 is supported in dpdk, so not sure why it wouldn't work.

LeeR

@dennis_s It's in my original post. Scroll down the code section.