Can't get to login.microsoft.com

dcihon

I have a pfSense firewall and some setting must be set that I cannot find. Whenever I try to go to login.microsoft.com it won't connect to that site. As soon as I turn off the firewall I can connect.
I don't know much about this firewall so any help is appreciated.
Thanks
Dan

viragomann

Are you running pfBlockerNG? Maybe it is blocking the site.

stephenw10

Define 'I turn off the firewall'.

How exactly does it fail when connecting from behind pfSense? Timeout? Can't resolve?

Steve

dcihon

I am on the pfsense now.
Let me start off by saying I know little about this system.
How do I know if I have pfBlokerNG?
Turn off the firewall means this.
I have a wired connection that is behind the firewall.
That is when it doesn't work. It just never connects to the site.
When I disconnect the ethernet and go wireless it connects to the site just fine.
Thanks
Dan

stephenw10

@dcihon said in Can't get to login.microsoft.com:

How do I know if I have pfBlockerNG?

When you connect to the pfSense webgui it would be shown in the Firewall menu.

Check the firewall logs in Status > System Logs > Firewall tab. Do you see any blocked traffic from your client when you try to access it?

Try to resolve login.microsoft.com from Diagnostics > DNS Lookup. Do you see a real IP?
Can you resolve it directly fro your client behind the firewall?

Steve

dcihon

I don't have pFBlockerBG installed.
I found that out.
The DNS lookup finds several IP addresses for login.microsoft.com
I can not ping or tracert to it.
It does not show up in the firewall as blocked that I can see. Not sure if I am looking at the correct place.
I can not resolve it directly behind the firewall.
What can I try next.

stephenw10

Ok, so pfSense can resolve it. Does it show a reply from all the DNS servers listed there?
I could imagine external server resolve it but localhost (127.0.0.1) does not perhaps?

Check Services > DNS Resolver. Is it enabled? If not check the DNS Forwarder instead.
In whichever is enabled look for host or domain overrides for *.microsoft.com.
Remove them if there are any.

If not then make sure your client is actually using pfSense for DNS.

Steve

dcihon

When I do ipconfig /all it shows 127.0.0.1 for dns
I have turned DNS Resolver on and off. I have turned DNS Forwarder on and off.
None of it seems to make a difference.
I don't see any *.microsoft.com listed anywhere. That doesn't mean it's not there.

How should I have this set up?
Use DNS Resolver or DNS Forwarder or both or none?
Looking for guidance here. I appreciate the help.
I am not opposed to someone taking over my machine and taking a look at this with me if that would help.

What should I do next?

provels

Can you traceroute (or tracert in Windows) to login.microsoft.com? Could be an ISP or backbone issue.

dcihon

C:\WINDOWS\system32>tracert login.microsoft.com

Tracing route to san.current.a.prd.aadg.akadns.net [40.126.0.70]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms pfsense.eaglestl.com [192.168.1.1]
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.

stephenw10

Ok, so the client also resolves it but that cannot reach it.
By default the DNS resolver should be enabled and pfSense will hand it's internal interface IP to client to use for DNS.

Does pfSense also fail when trying to traceroute at every step like that?

If so it's either blocked somewhere upstream or you have a bad route somewhere.
Check Diag > Routes, do you have any subnets defined containing that IP?

Steve

Gertjan

Probably an upstream router that blocks all ICMP requests.
That explains the total absence of replies.

dcihon

This is what I get when I do a tracert from pfsense.
1 * * *
2 * *traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*
3 traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*
4 traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*

This is from the routing table.

code_textdefault	47.47.60.89	UGS	66550	1500	bce0	
40.0.0.0/5	link#3	U	2827313	1500	bce1	
40.139.91.18	link#3	UHS	0	16384	lo0	
47.47.60.88/29	link#1	U	2593273	1500	bce0	
47.47.60.90	link#1	UHS	0	16384	lo0	
66.148.187.136/29	link#3	U	2603986	1500	bce1	
66.148.187.139	link#3	UHS	0	16384	lo0	
66.148.187.139/32	link#3	U	0	1500	bce1	
66.148.187.140	link#3	UHS	0	16384	lo0	
127.0.0.1	link#7	UH	604	16384	lo0	
172.16.1.0/24	192.168.1.5	UGS	0	1500	re0	
192.168.1.0/24	link#2	U	37862400	1500	re0	
192.168.1.1	link#2	UHS	0	16384	lo0	
208.67.220.220	47.47.60.89	UGHS	16413	1500	bce0	
208.67.222.222	47.47.60.89	UGHS	16530	1500	bce0	
IPv6 Routes
Destination	Gateway	Flags	Use	Mtu	Netif	Expire
::1	link#7	UH	0	16384	lo0	
fe80::%bce0/64	link#1	U	0	1500	bce0	
fe80::219:b9ff:fede:bb5d%bce0	link#1	UHS	0	16384	lo0	
fe80::%re0/64	link#2	U	0	1500	re0	
fe80::ca3a:35ff:fede:f20d%re0	link#2	UHS	0	16384	lo0	
fe80::%bce1/64	link#3	U	0	1500	bce1	
fe80::219:b9ff:fede:bb5b%bce1	link#3	UHS	0	16384	lo0	
fe80::%lo0/64	link#7	U	0	16384	lo0	
fe80::1%lo0	link#7	UHS	0	16384	lo0	
ff01::%bce0/32	fe80::219:b9ff:fede:bb5d%bce0	U	0	1500	bce0	
ff01::%re0/32	fe80::ca3a:35ff:fede:f20d%re0	U	0	1500	re0	
ff01::%bce1/32	fe80::219:b9ff:fede:bb5b%bce1	U	0	1500	bce1	
ff01::%lo0/32	::1	U	0	16384	lo0	
ff02::%bce0/32	fe80::219:b9ff:fede:bb5d%bce0	U	0	1500	bce0	
ff02::%re0/32	fe80::ca3a:35ff:fede:f20d%re0	U	0	1500	re0	
ff02::%bce1/32	fe80::219:b9ff:fede:bb5b%bce1	U	0	1500	bce1	
ff02::%lo0/32	::1	U	0	16384	lo0	

pfSense is © 2004 - 2019 by Rubicon Communications, LLC (Netgate). All Rights Reserved. [view license]

johnpoz

@dcihon said in Can't get to login.microsoft.com:

C:\WINDOWS\system32>tracert login.microsoft.com
Tracing route to san.current.a.prd.aadg.akadns.net [40.126.0.70]

So notice the 40.126 address... Now notice his routing table...

40.0.0.0/5	link#3	U	2827313	1500	bce1

No shit he can not get there ;)

I take it there is a shit ton of stuff he can not get to - and this is just 1 has noticed.

40.0.0.0 - 47.255.255.255

That is a LOT Of addresses... He thinks are directly attacked to his link#3 ;)

Someone has a typo on their mask would be my guess.

dcihon

So can you give me some help on how to fix this?
Where do I go in pfsense to change it so it doesn't route there or whatever I should do to fix this.

Gertjan

@dcihon said in Can't get to login.microsoft.com:

So can you give me some help on how to fix this?

What is your WAN IP / LAN IP ?
WAN is static ? DHCP ?

johnpoz

Looks like maybe someone pulled some IP range out of their you know what and said lets use this..

What network is connected to bce1?

Looks like the default route is on that /29 network on bce0

dcihon

My WAN IP is : 47.47.60.90
There are 2 internet connections at this office .
Lan IP is 192.168.1.60
WAN is static.
DHCP coming from pfsense LAN interface.

Gertjan

More info about this one :
@dcihon said in Can't get to login.microsoft.com:

My WAN IP is : 47.47.60.90

Where did it came from ? Mask ?

( @johnpoz : let's get ready for the ROFL )

dcihon

Not sure how to answer these questions.
Does this help.
Windstream WINDSTREAMWAN 66.148.187.137 66.148.187.137 Windstream Gateway
WSvlan1GWE LAN 192.168.1.5 192.168.1.5 vlan1 IP on WS Router
WindstreamWANGW WINDSTREAMWAN 40.139.91.17 40.139.91.17
CharterWANGW (default) CHARTERWAN 47.47.60.89 47.47.60.89 Charter