Increased Memory and CPU Spikes (causing latency/outage) with 2.4.5
-
Hi,
Im also suffering CPU spikes that is causing massive lagg issues for me.
Ive noticed it mainly revolves around the "pfctl" process randomly spiking. occasionally i see unbound also but mostly its pfctl.
-
We are experiencing the same issue. Upgraded from v2.4.4p3 to v2.4.5. CPU is stuck at 70%, up from 2% before.
Memory usage is up as well.
-
@daNutz said in Increased Memory and CPU Spikes (causing latency/outage) with 2.4.5:
Hi,
Im also suffering CPU spikes that is causing massive lagg issues for me.
Ive noticed it mainly revolves around the "pfctl" process randomly spiking. occasionally i see unbound also but mostly its pfctl.
And are you running on baremetal or a virtualisation platform?
-
@muppet baremetal and just upgraded from a very stable v2.4.4.p3 to v2.4.5
-
I have never yet seen or caught pfctl anywhere up on cpu usage in all the testing. all I ever see is PHP at the top screaming.
and no issues on the single older hardware I upgraded, it's a backup router, that rarely gets used, mainly when servicing the esxi host.
now I do know without traffic limiters/shaping enabled bufferbloat on the cable ISP here caused wan flapping which then ran pfctl cpu usage up high. but that's normal since it keeps reloading everything over and over. -
Just our of curiousity, is everyone running on x86_64 architecture? I.e., is anyone running ARM architecture and experiencing high RAM usage?
FYI, I upgraded SG-3100 (ARM) from 2.4.4 to 2.4.5 and memory usage has been basically unchanged (good). Running packages: apcupsd, pfBlockerNG (2.1.4_21), service_watchdog, suricata.
The latest commit to pfBlocker package (Commits on Mar 28, 2020) says something about fixing MaxMind DB updates....
-
I'm sure this will go unread, but the problem is nothing to do with pfBlocker
Let see if I can write that biggerpfBlockerNG isn't the problem!
Yes, it seems that adding in more complex rules and giving pfctl more to work to do, as pfBlockerNG does, certainly exacerbates the problem and makes it more noticeable.
But I've hit this problem on two boxes and neither is running pfBlockerNG.
@msf2000 It certainly seems that x64 is hitting it and you're right, I haven't seen too many mentions of ARM platforms having it.
-
@muppet Yes! You are entirely right. pfblocker is victim not villain.
The question I would like answered is does this problem exist on all 2.4.5 x64 installs or just some. On clean installs or just upgraded ones? The timing of this stinks. I don't expect a lot of movement concerning this for some time.
I really have no one to blame other than myself. I thought that given the extended time between releases and the time 2.4.5 spent in RC status that it would be rock solid out of the gate. I was wrong and I should have known better than to do this upgrade now.
I'll do a clean install and restore my config when I can do that without taking myself or the kids offline for an extended time. Remote work, remote school.
-
@jwj Yes, I feel the same in that I wish I hadn't upgraded. I could have easily rolled back (I took a backup of my VM before I pressed go) but I've been meaning for ages to try out Vyos at home and this was the final push I needed.
I'm sure this will be fixed, I expect it's an underlying FreeBSD issue, probably something to do with workarounds for Spectre/Meltdown or similar.
It was bad timing, but then joke's on us really - who upgrades their key infrastructure during a crisis this the worlds current one (for future readers, COVID19). The release notes even warn us. So we've noone to blame but ourselves.
I also regret not having run a 2.4.5-RC build where I could have helped diagnose this and fix it before production. It's the old thing of "I'm sure someone else has done that". Alas.
Onwards and upwards though, I love pfSense!
-
@muppet said in Increased Memory and CPU Spikes (causing latency/outage) with 2.4.5:
I'm sure this will go unread, but the problem is nothing to do with pfBlocker
Let see if I can write that biggerIrrespective of size or color of font, yours appears to be an absolute claim in the negative, which cannot be proven by definition. To the contrary, there is a base of evidence pointing to cause/effect combinations of pfblocker, unbound, pfctl that others proved out on their respective systems (which appear to be mostly x86_64 based). If you have substantive data to offer that may establish different cause/effect sets, that may be helpful to all in isolating the issue(s) and hopefully fixing it.
-
@t41k2m3 I played around and tested from fresh install, no imported config, no packages and only two nics, wan/lan on ESXI 6.5 and vbox on windows 10(complete different amd/intel machines) and problem exists in playing around through changing settings randomly. pfblocker and other packages do agitate the issue making t very visible.
-
@t41k2m3 I have no packages installed and it's still a problem. Therefore it's easy to prove it's not pfBlockerNG.
As I posted, anything like pfBlockerNG etc seem to exacerbate the problem, but are not the cause of it.
-
Hello all,
I`m here because I ran into the same issue.
On Friday I updated to 2.4.5 on a baremetal system (Netgate D1541 with 32GB RAM).
Additionally I updated pfBlockerNG to the devel version (2.2.5_30).Same issues as decribed above including high system load up to 23, pfctl eating 180% CPU, and similar issues like Nginx gateway timeouts, VPN interrupts, broken internet connections.
Additionally I had a broken GEOM mirror after the update process and reboot (I did not switch it off or similar). The system was not usable after the rebuild, I saw a lot off missing PHP files. Nothing was working, the network was also broken. To get it running again I had to reinstall the system. This is also new for me. The S.M.A.R.T status was and is without any issue. The update process did not show an error.
Does anybody has any hint what could be the root cause for such a behavior?
For me it looks like the mirror was broken while the update process was running and after the reboot it copied from the wrong SSD to the other. I have no clue how this can happen.If the system is under load the WAN gateways have a high latency but without packet loss, which I never saw before:
The system is not accessible for minutes if anything changed.
As I added some new VLANs it never came back, I had to go onsite for a reboot which is not so easy at the moment because everybody is working from home.It is not only the pfctl process, I saw ntopng, resolver, php-fpm with high CPU usage.
In the meanwhile I don`t believe that the problem is only pfBlockerNG-devel, it is more likely one or more problems somewhere in the system.What is the best solution for now? Waiting for a fix is not an option with COVID-19.
Has anybody tested a clean install of 2.4.4 P3 and restored the settings of the 2.4.5 version?
Is this working or should I waste my work of the last few days and restore a backup of 2.4.4 P3?Ralf
-
As i write early, now i am on Hyper-V Server 2019, set 2 CPU cores for pfSense 2.4.5, i have made clean install on new VHDX storage file with config restore from old patched system. Set Kernel PTI: Disabled and MDS Mitigation: Inactive, than make clean config on pfBlockerNG and reinstall pfBlockerNG-devel, after it — manually restore all settings in GUI. System uptime is 4 days for now, no lags and abnormal CPU usage, just a little bigger RAM usage (~20%).
p.s.
Once per hour system gets frozen for few seconds, when pfblocker make updates, must to set update once per day. -
@getcom I exported the config from my 2.4.5 system, did a fresh install of 2.4.4 p3 and restored the config back. Everything works as expected for me.
-
@Gektor That once per hour is what we are talking about. The pfSense becomes completely unresponsive. If you are running VOIP traffic, your call is dropped. If you are collaborating in a video call, you lose the call. Setting pfBlocker to only update once a day during off hours is a nice workaround, but it's not a fix.
-
Here's my test:
Hyper-V on Windows Server 2019
2 Dedicated NICs (Both intel gigabit) without host sharing, all acceleration disabled. (tried it with everything enabled and the 3 permuations)
4 cores, 4 gigs of ram
Internet NIC plugged into Bridged ISP fiber modem that uses PPPoE.pfSense 2.4.3 clean install: 2% cpu, saving settings doesn't have any issue. First configuration, until PPPoE connection is established is slow, then once that's set, it's fast. (appears pfSense waits for a DHCP WAN address a REALLY long time.
pfSense 2.5 clean install: 20% cpu, 15x longer while PPPoE not setup between saves and initial configuration, after setup, every save of settings causes cpu spike, and system becomes completely non-responsive including pings to the local lan address of the router.
Both tests were done with no restore of settings, nothing installed, only the initial wizard run. That's it.
I tried disabling AES-NI, hardware offload of everything, and it made no difference, 2.4.3 is fine on hyper-v, 2.5 is a disaster.
Should be very easy to reproduce. Just install the free hyper-v server per above, and setup pfsense on hyper-v and it should have the issues. Don't know if PPPoE is part of the problem or not, but just plug the internet wan adapter into a switch without a dhcp server on it to reproduce.
-
@JohnGalt1717 I noticed that some are saying that symptoms disappear by dropping to 1 core for the VM - have you tried that?
-
Too many threads, too many ways to look at the issue.
VM's and bare metal both have the problem. How badly the problem is felt is dependent on how capable your system is. Anything that causes pfctl to run will cause the problem in my experience. I'm on good hardware so it's not a show stopper, more of an annoyance.
pf_blocker is NOT the problem. Issue with mime types was identified and fixed.
Putting the 2.4.4-p3 download links back up would be a good idea IMHO.
-
@snarfattack said in Increased Memory and CPU Spikes (causing latency/outage) with 2.4.5:
@getcom I exported the config from my 2.4.5 system, did a fresh install of 2.4.4 p3 and restored the config back. Everything works as expected for me.
It would be interesting which output would be created with a diff -Bur between a fresh installed pfS with restored configs and an updated version.
This has to be done to get an idea about the problem if it is a database/config item issue. As I`m using only baremetal firewalls only I would have to dump the SSD and copy it to one of my Proxmox hosts.
Then reconfigure the ethernet devices + setups and try to reproduce that. It can work like that or not. It would be much easier for somebody who has already a running VM.
