Grafana Dashboard using Telegraf with additional plugins

erbalo

@bigjohns97 said in Grafana Dashboard using Telegraf with additional plugins:

@erbalo said in Grafana Dashboard using Telegraf with additional plugins:
@bigjohns97 said in Grafana Dashboard using Telegraf with additional plugins:
@erbalo said in Grafana Dashboard using Telegraf with additional plugins:
Should that be ok so?
#!/bin/sh
/usr/local/sbin/unbound-control -c /var/unbound/unbound.conf $* | grep -vE 'thread[0-9]+'
unbound-control -c /var/unbound/unbound.conf stats_noreset | grep total.num
When I tried running that command that was originally in there (your top line) it didn't work.
Just it should be:
#!/bin/sh
unbound-control -c /var/unbound/unbound.conf stats_noreset | grep total.num
?
That is what I am running, correct, and it didn't affect any other metrics.

I don't receive any data to grafana, what can be wrong?

bigjohns97

@erbalo said in Grafana Dashboard using Telegraf with additional plugins:

@bigjohns97 said in Grafana Dashboard using Telegraf with additional plugins:
@erbalo said in Grafana Dashboard using Telegraf with additional plugins:
@bigjohns97 said in Grafana Dashboard using Telegraf with additional plugins:
@erbalo said in Grafana Dashboard using Telegraf with additional plugins:
Should that be ok so?
#!/bin/sh
/usr/local/sbin/unbound-control -c /var/unbound/unbound.conf $* | grep -vE 'thread[0-9]+'
unbound-control -c /var/unbound/unbound.conf stats_noreset | grep total.num
When I tried running that command that was originally in there (your top line) it didn't work.
Just it should be:
#!/bin/sh
unbound-control -c /var/unbound/unbound.conf stats_noreset | grep total.num
?
That is what I am running, correct, and it didn't affect any other metrics.
I don't receive any data to grafana, what can be wrong?

Make sure the data source and table is the same on your side as what I posted.

@erbalo copy the JSON from above again I replaced some of my entries with variables so be more plug and play.

von Papst

@bigjohns97 got it running. But still missing CPU, memory and system load data. What am I missing?

bigjohns97

@von-papst This is just a single panel, add it to the dashboard being developed in this thread.

jpcapone

This post is deleted!

jpcapone

I think I am late to the party but I am trying to figure some things out. I am running pfsense in a vm on esxi 6.7. I was able to figure out enough to get most of the panels working but I think the scripts arent working. I am not super familiar with FreeBSD so I am finding it difficult to determine how to test run the scripts so that I can remediate. I am pretty sure the scripts arent running because all of the panels aren't populated with data and when I do a show measurements on the DB I get only the entries listed below. Any advice would be appreciated.
cpu
disk
diskio
mem
net
pf
processes
swap
system

bigjohns97

@jpcapone This is the best way to troubleshoot the plugins

Taken from https://github.com/VictorRobellini/pfSense-Dashboard

jpcapone

This post is deleted!

jpcapone

@bigjohns97
Thanks for that. I was able to figure out the issues with the plugins. Now I am just left with what I have pasted below. Can you please advise?

2021-02-23T19:01:58Z I! Loaded inputs: cpu disk diskio exec kernel logparser (2x) mem net pf processes swap system
2021-02-23T19:01:58Z I! Loaded aggregators:
2021-02-23T19:01:58Z I! Loaded processors:
2021-02-23T19:01:58Z I! Loaded outputs: influxdb
2021-02-23T19:01:58Z I! Tags enabled: host=xxxxpfSense.xxxxolutions.co
2021-02-23T19:01:58Z I! [agent] Config: Interval:10s, Quiet:false, Hostname:"xxxxpfSense.xxxxolutions.co", Flush Interval:10s
2021-02-23T19:01:58Z D! [agent] Initializing plugins
2021-02-23T19:01:58Z W! [inputs.logparser] The logparser plugin is deprecated; please use the 'tail' input with the 'grok' data_format
2021-02-23T19:01:58Z W! [inputs.logparser] The logparser plugin is deprecated; please use the 'tail' input with the 'grok' data_format
2021-02-23T19:01:58Z D! [agent] Connecting outputs
2021-02-23T19:01:58Z D! [agent] Attempting connection to [outputs.influxdb]
2021-02-23T19:01:58Z D! [agent] Successfully connected to outputs.influxdb
2021-02-23T19:01:58Z D! [agent] Starting service inputs
2021-02-23T19:01:58Z E! [inputs.logparser] Error in plugin: open /var/log/pfblockerng/dnsbl.log: no such file or directory
2021-02-23T19:01:58Z E! [inputs.logparser] Error in plugin: open /var/log/pfblockerng/ip_block.log: no such file or directory
2021-02-23T19:02:00Z E! [inputs.logparser] Error in plugin: open /var/log/pfblockerng/dnsbl.log: no such file or directory
2021-02-23T19:02:00Z E! [inputs.logparser] Error in plugin: open /var/log/pfblockerng/ip_block.log: no such file or directory

bigjohns97

@jpcapone said in Grafana Dashboard using Telegraf with additional plugins:

@bigjohns97
Thanks for that. I was able to figure out the issues with the plugins. Now I am just left with what I have pasted below. Can you please advise?

2021-02-23T19:01:58Z I! Loaded inputs: cpu disk diskio exec kernel logparser (2x) mem net pf processes swap system
2021-02-23T19:01:58Z I! Loaded aggregators:
2021-02-23T19:01:58Z I! Loaded processors:
2021-02-23T19:01:58Z I! Loaded outputs: influxdb
2021-02-23T19:01:58Z I! Tags enabled: host=xxxxpfSense.xxxxolutions.co
2021-02-23T19:01:58Z I! [agent] Config: Interval:10s, Quiet:false, Hostname:"xxxxpfSense.xxxxolutions.co", Flush Interval:10s
2021-02-23T19:01:58Z D! [agent] Initializing plugins
2021-02-23T19:01:58Z W! [inputs.logparser] The logparser plugin is deprecated; please use the 'tail' input with the 'grok' data_format
2021-02-23T19:01:58Z W! [inputs.logparser] The logparser plugin is deprecated; please use the 'tail' input with the 'grok' data_format
2021-02-23T19:01:58Z D! [agent] Connecting outputs
2021-02-23T19:01:58Z D! [agent] Attempting connection to [outputs.influxdb]
2021-02-23T19:01:58Z D! [agent] Successfully connected to outputs.influxdb
2021-02-23T19:01:58Z D! [agent] Starting service inputs
2021-02-23T19:01:58Z E! [inputs.logparser] Error in plugin: open /var/log/pfblockerng/dnsbl.log: no such file or directory
2021-02-23T19:01:58Z E! [inputs.logparser] Error in plugin: open /var/log/pfblockerng/ip_block.log: no such file or directory
2021-02-23T19:02:00Z E! [inputs.logparser] Error in plugin: open /var/log/pfblockerng/dnsbl.log: no such file or directory
2021-02-23T19:02:00Z E! [inputs.logparser] Error in plugin: open /var/log/pfblockerng/ip_block.log: no such file or directory

Looks like you aren't using pfblockerng is that the case?

Are you now getting data on the influxdb side and in turn on your dashboard?

jpcapone

@bigjohns97
yup, I am getting data but I am still not seeing the same measurements in my DB that you see in the in the troubleshooting section. Also, I had to turn on pfblockerng and now but I am still not getting any data from it in grafana. Any suggestions?

jpcapone

@bigjohns97 I think I got it. No data was being generated because I wasn't surfing after I set up pfblockerng. I am very new to this as you can tell. Thanks for your help!!!!

VictorRobellini

I've made some updates to the dashboard. I would love feedback.

https://github.com/VictorRobellini/pfSense-Dashboard/commit/520eea4f49b5107cb79e887ec94951c015d52a6e

bigjohns97

@victorrobellini said in Grafana Dashboard using Telegraf with additional plugins:

I've made some updates to the dashboard. I would love feedback.

https://github.com/VictorRobellini/pfSense-Dashboard/commit/520eea4f49b5107cb79e887ec94951c015d52a6e

You didn't like my unbound cache hit panel above?

VictorRobellini

More updates and bugfixes

telegraf config update required! Please read this in the Readme or things won't work

I updated the parser for the pfBlocker logs. It now uses the non-deprecated tails plugin and also fixes parsing errors that prevented data from being inserted into the influxdb.

VictorRobellini

@bigjohns97 said in Grafana Dashboard using Telegraf with additional plugins:

The extra panels are great, but it's not something I use and since I don't know how to properly partition and rollup influx data, I haven't implemented the unbound data. If influx had an automatic rollup like RRD, I would absolutely include it. I'm just being mindful of database growth.

VictorRobellini

@bigjohns97

I went back to poke around the unbound plugin, it seems to be working fine without the wrapper. I read through the plugin docs to find a use case for collecting the data and showing metrics, but there's just soo much data and I can't think of a use that would justify the additional collection and overhead. Here's your panel in template format and additional telegraf config:

Telegraf config

[[inputs.unbound]]
    server = "127.0.0.1:953"
    binary = "/usr/local/sbin/unbound-control"
    config_file = "/var/unbound/unbound.conf"
    timeout = "1s"
    thread_as_tag = true

Grafana 7 graph

{
  "aliasColors": {
    "Hits": "#629e51",
    "Misses": "#bf1b00"
  },
  "breakPoint": "50%",
  "cacheTimeout": null,
  "combine": {
    "label": "Others",
    "threshold": 0
  },
  "decimals": null,
  "fieldConfig": {
    "defaults": {
      "custom": {}
    },
    "overrides": []
  },
  "fontSize": "100%",
  "format": "short",
  "gridPos": {
    "h": 5,
    "w": 5,
    "x": 0,
    "y": 1
  },
  "hideTimeOverride": false,
  "id": 23763571993,
  "interval": null,
  "legend": {
    "header": "",
    "percentage": true,
    "percentageDecimals": 0,
    "show": true,
    "sortDesc": true,
    "values": false
  },
  "legendType": "On graph",
  "links": [],
  "maxDataPoints": 3,
  "nullPointMode": "connected",
  "pieType": "donut",
  "pluginVersion": "6.3.3",
  "strokeWidth": "2",
  "targets": [
    {
      "alias": "Hits",
      "groupBy": [],
      "measurement": "unbound",
      "orderByTime": "ASC",
      "policy": "default",
      "refId": "A",
      "resultFormat": "time_series",
      "select": [
        [
          {
            "params": [
              "total_num_cachehits"
            ],
            "type": "field"
          }
        ]
      ],
      "tags": [
        {
          "key": "host",
          "operator": "=~",
          "value": "/^$Host$/"
        }
      ]
    },
    {
      "alias": "Misses",
      "groupBy": [],
      "measurement": "unbound",
      "orderByTime": "ASC",
      "policy": "default",
      "refId": "B",
      "resultFormat": "time_series",
      "select": [
        [
          {
            "params": [
              "total_num_cachemiss"
            ],
            "type": "field"
          }
        ]
      ],
      "tags": [
        {
          "key": "host",
          "operator": "=~",
          "value": "/^$Host$/"
        }
      ]
    }
  ],
  "thresholds": [],
  "timeFrom": null,
  "timeShift": null,
  "title": "DNS Cache Hit/Miss Ratio",
  "type": "grafana-piechart-panel",
  "valueName": "current",
  "datasource": null
}

VictorRobellini

@bigjohns97

Here's a plugin - telegraf_unbound_lite.sh - that pulls in just the metrics associated with your graph. It uses the same structure as the unbound plugin but the names use "." rather than "_", other than that, it's a drop-in replacement.

Just add it to the telegraf config under the telegraf_temperature.sh entry.

bigjohns97

This post is deleted!

Doboy

@victorrobellini Any idea why I still have this error when trying to execute the gateways script from the telegraf conf file?

[inputs.exec] Error in plugin: exec: fork/exec /usr/local/bin/gateways.py: no such file or directory for command '/usr/local/bin/gateways.py':

I have checked the permissions on the script file and it's set to 0555, no weird characters in the script and when I run the file from CLI I get proper behavior.

[2.4.5-RELEASE][admin@******]/root: /usr/local/bin/python3.7 /usr/local/bin/gateways.py
gateways,gateway_name=WAN_DHCP rtt=769.0,rttsd=562.0,loss=0i

I'm on pfsense 2.4.5 and latest telegraf, rest of settings in telegraf working fine.