Captif portal radius authentication on multi wan
-
The problem is that when using captive portal with radius, radius authentication is don on the wan interface end routed back to the lan side if your server is an the lan side. Of cause your nas ip on radius will be your wan ip now. This is not preferred but ok, problem however is with multi wan load balancing. The wan ip changes every time and therefor the nas ip. this is problem. Any suggestions?
-
The captive portal is not multiWAN compatible in 1.2.x.
Read in the 2.0_ALPHA subforum if you need this functionality.
-
Mabe you miss understood? The captive portal is on the LAN side. Should not be a problem. ::)
-
Mabe you miss understood? The captive portal is on the LAN side. Should not be a problem. ::)
we understand you
you need to have at least 1.2.3 RC1 to do that
1.2x will not do it
i am useing 1.2.3 RC2 works grate with multiWAN
-
you also have to put both of your pfsense WANS in your radius server
that way wich ever wan your radius packets go out your server will accept it ;D