How to get pfSense WAN to accept VLAN 0

natbart

I am currently still on 2.4.5-RELEASE-p1 (amd64), am I safe to do an in place upgrade to 2.5.2?

Can I upgrade with packages still installed and not break anything. Asking in this space just because i dont want it to break this functionality of course.

stephenw10

2.5.2 should be fine. The igb driver in 2.6 does not pass VLAN0 correctly. That should now be fixed in 2.7 snapshots though, we are waiting for feedback on that.

Steve

cucu007

I had my pfsense running 2.6 working flawless for a bit then I switch from xfinity to frontier fiber then all hell broke loose. After much research and testing I had no choice bu to roll things back to 2.5.2 and apply the vlan script fix, which so far is working fine. Is there an ETA for getting this bug fix in an upcoming release for 2.6 or will this have to wait for 2.7?

Also, are there any plans to update the vlan script to make it comaptible with release 2.6? Please advise.

cucu007

@stephenw10 I tried running the latest 04/03 snapshot for 2.7 and it doesnt seem to work either, had no choice but to rollback to 2.5.2 to get my internet up and running, it was a bad weekend to say the least getting this VLAN 0 issue sorted.

stephenw10

Hmm, the fix for the known issue in e1000 should now be in 2.7 snapshots:
https://github.com/pfsense/FreeBSD-src/commit/9c762cc125c0c2dae9fbf49cc526bb97c14b54a4

If you're sure you were running a snap with that in that might not be the issue after all.

Try running a pcap to see the tagged traffic.

Steve

cucu007

@stephenw10 I was running the latest development SS as of Saturday and it didnt work. So I opted to rollback to 2.5.2 and apply the VLAN script fix, so far is working. Do you happen to now if the script will soon be modify to accommodate release 2.6, I like to stay ahead rather than behind :-)

stephenw10

The script itself should be fine in 2.6 or 2.7. The issue is the e1000 driver which incorrectly handles VLAN0 from what I can see.

To be clear you applied the script in 2.7 and it failed? Did it show any errors?

Steve

cucu007

@stephenw10 it just didnt work, I give up on it, didnt even check the logs.

I am on 2.5.2 and is working, but my downloads is now slow. I am using frontier fiber. Did you get the script working on 2.6?

stephenw10

I personally don't use it. My ISP doesn't require priority tagging.

The script works fine in 2.6 as long as you don't have an Intel e1000 NIC as I understand it.

Steve

c45p32

I can confirm that with fix https://github.com/MonkWho/pfatt/issues/67#issuecomment-1043358822 on 2.6.0 works perfect. I haven't had any issues. My backup router has em drivers and I haven't had time to test that out yet on 2.7.0.

cucu007

@c45p32 said in How to get pfSense WAN to accept VLAN 0:

I can confirm that with fix https://github.com/MonkWho/pfatt/issues/67#issuecomment-1043358822 on 2.6.0 works perfect. I haven't had any issues. My backup router has em drivers and I haven't had time to test that out yet on 2.7.0.

I am planning to do some testing this weekend with 2.6.0. My internet was down for two days, so I opted to bring back my old router running openWRT and so far is working flawless, but if at all possible I would like to go back to pfSence since is my favorite!

Any ideas of what the 2.7.0 roadmap looks like in terms of release? Any potential tentatrrive dates?

stephenw10

No, there's no schedule for a 2.7 release yet.

22.05 is targeted at May obviously. That also contains the same fix. Assuming that fixes it.

cucu007

I tried again today, doesnt work....I tried uploading both em and igb even when I only needed igb. I follow the instructions by the book in the post you reference, it looks like this remains broken as of 2.6.0. Going back to OpenWRT until this is sorted out correctly, will miss my pfSense box. ;-(

Please consider integrating this fix into the high priority list as it impact all AT&T and Frontier fiber customers. Thank you all for the good intentions. Shame on the ISPs for doing this vlan 0 tagging.

cucu007

@c45p32

Can you elaborate on how you getting this working, please provide the details as you follow.

I did follow the reference link you provided and follow the verbatin how-to but still not working on 2.6.0....I am using the igb driver, I even tried executing the pfat script from the shell and it keep giving me an error somehow on line 7. Anyways, any help would be apreciated as this is driving me nuts and had to put back in the closet my pfSense box.

c45p32

@cucu007

I use Frontier, all you should have to do is put the driver fix in first.
Next, put the VLAN 0 script in and create the shellcmd job I run my preshellcmd, make sure you are updating the script to your mac address for the WAN, and using the correct interface IE igb0.
Next just update your WAN interface to ngeth0. Reboot and you should be good to go. But make sure you release your IP.

cucu007

@c45p32 if at all possible, can you spare 5 minutes and put a quick how-to for those of us struggling in the integration with 2.6.0. I am using frontier fiber as well. Thank you in advance.

c45p32

@cucu007

Use this post (https://github.com/MonkWho/pfatt/issues/67#issuecomment-1043358822) to install the driver for igb0.
Reboot
Download vlan script from here: [vlanzero.sh.tar.gz] (https://forum.netgate.com/assets/uploads/files/1614644825333-vlanzero.sh.tar.gz) and unzip it.
Edit vlanzero.sh and change ONT_IF='xx0' to your WAN assignment, usually igb0. You can find this under Interfaces > Assignments
In the same file change ONT_ETHER_ADDR='xx:xx:xx:xx:xx:xx' to your mac address for your WAN. You can usually see this under Status > Interfaces Under the WAN interface heading. Save and close the file.
Goto Diagnostics > Command Prompt and Upload the vlanzero.sh file you just edited.
ssh into pfSense
type the following commands:
mv /tmp/vlanzero.sh /root/vlanzero.sh
chmod +x vlanzero.sh
./vlanzero.sh
Go to Interface > Assignments and change your WAN to ngeth0 click save and apply
Make sure you have the package shellcmd installed. Go to Services > Shellcmd
Click "Add" for Command put "/root/./vlanzero.sh" without quotes, shellcmd type set it to "earlyshellcmd", and then name it what ever you want. Save
Reboot and you should be working.

Note you need to either release your IP using the Frontier box, or just unplug your ONT for a few min. I usually just unplug easier.

cucu007

@c45p32 Let me try this once again, thank you for taking the time to do the write up. Will provide the update shortly.

I will be trying this on 2.6.0 so you know.

cucu007

@cucu007

@cucu007 I just tried this remains broken on 2.6.0< i reset the ONT and reloaded 2.6.0 clean install....Follow ed the instructions regarding igb and em loaded modules. Follow the config.xml changes using early shell, still my IP is showing 0.0.0.0 in the pfSense end, I tried rebooting multiple times same effect, looks like this things remains broken on 2.6.0, hope someone can shine some light on this soon.

kldstat -v | grep -i igb
134 pci/igb

Screenshots of my outcome.

cucu007

@cucu007

How do you guys get the igb and em driver to load, I tried putting it in the place where the post mentioned and no matter what I do the old driver/module remains in loading state, any clues....maybe this is the reason why is not working since it keep loading the old driver (stock). Please advise.