Update to 2.5.0 broke DHCP relay
-
@johnsdixon said in Update to 2.5.0 broke DHCP relay:
Happy to build a test 2.5.0 environment to provide further info and logs if necessary.
very good, we need to know:
- DHCP Relay configuration (screenshot or
<dhcrelay>part from your config.xml); - Routing table (
netstat -rnoutput); - Interfaces IP addresses (
ifconfigoutput);
- DHCP Relay configuration (screenshot or
-
@viktor_g said in Update to 2.5.0 broke DHCP relay:
@johnsdixon said in Update to 2.5.0 broke DHCP relay:
Happy to build a test 2.5.0 environment to provide further info and logs if necessary.
very good, we need to know:
- DHCP Relay configuration (screenshot or
<dhcrelay>part from your config.xml); - Routing table (
netstat -rnoutput); - Interfaces IP addresses (
ifconfigoutput);
Hi, network plan I have already posted abouve.
Here are the requeired data:
[2.5.0-RELEASE][root@fwint3.XXXXXXXX.local]/conf: netstat -rn Routing tables Internet: Destination Gateway Flags Netif Expire default 10.10.65.3 UGS lagg0.65 10.10.55.0/28 link#19 U lagg0.11 10.10.55.2 link#19 UHS lo0 10.10.56.0/30 link#8 U bge1 10.10.56.1 link#8 UHS lo0 10.10.64.0/28 link#18 U lagg0.64 10.10.64.4 link#18 UHS lo0 10.10.64.6 link#18 UHS lo0 10.10.65.0/28 link#17 U lagg0.65 10.10.65.4 link#17 UHS lo0 10.10.65.6 link#17 UHS lo0 127.0.0.1 link#10 UH lo0 192.168.8.0/24 link#14 U lagg0.8 192.168.8.252 link#14 UHS lo0 192.168.8.254 link#14 UHS lo0 192.168.11.0/24 link#19 U lagg0.11 192.168.11.252 link#19 UHS lo0 192.168.11.254 link#19 UHS lo0 192.168.24.0/24 link#15 U lagg0.24 192.168.24.252 link#15 UHS lo0 192.168.24.254 link#15 UHS lo0 192.168.71.0/24 link#20 U lagg0.71 192.168.71.252 link#20 UHS lo0 192.168.71.254 link#20 UHS lo0 192.168.109.0/24 link#16 U lagg0.10 192.168.109.252 link#16 UHS lo0 192.168.109.254 link#16 UHS lo0 Internet6: Destination Gateway Flags Netif Expire ::1 link#10 UH lo0 fe80::%bge1/64 link#8 U bge1 fe80::529a:4cff:fe94:ad73%bge1 link#8 UHS lo0 fe80::%lo0/64 link#10 U lo0 fe80::1%lo0 link#10 UHS lo0 fe80::%lagg0/64 link#13 U lagg0 fe80::faf2:1eff:fe34:9540%lagg0 link#13 UHS lo0 fe80::%lagg0.8/64 link#14 U lagg0.8 fe80::faf2:1eff:fe34:9540%lagg0.8 link#14 UHS lo0 fe80::%lagg0.24/64 link#15 U lagg0.24 fe80::faf2:1eff:fe34:9540%lagg0.24 link#15 UHS lo0 fe80::%lagg0.109/64 link#16 U lagg0.10 fe80::faf2:1eff:fe34:9540%lagg0.109 link#16 UHS lo0 fe80::%lagg0.65/64 link#17 U lagg0.65 fe80::faf2:1eff:fe34:9540%lagg0.65 link#17 UHS lo0 fe80::%lagg0.64/64 link#18 U lagg0.64 fe80::faf2:1eff:fe34:9540%lagg0.64 link#18 UHS lo0 fe80::%lagg0.11/64 link#19 U lagg0.11 fe80::faf2:1eff:fe34:9540%lagg0.11 link#19 UHS lo0 fe80::%lagg0.71/64 link#20 U lagg0.71 fe80::faf2:1eff:fe34:9540%lagg0.71 link#20 UHS lo0[2.5.0-RELEASE][root@fwint3.XXXXXXXXXXX.local]/conf: ifconfig igb0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether b4:96:91:33:de:40 media: Ethernet autoselect status: no carrier nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether b4:96:91:33:de:41 media: Ethernet autoselect status: no carrier nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> igb2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether b4:96:91:33:de:42 media: Ethernet autoselect status: no carrier nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> igb3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether b4:96:91:33:de:43 media: Ethernet autoselect status: no carrier nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> ixl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 media: Ethernet autoselect (10Gbase-SR <full-duplex>) status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> ixl1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 hwaddr f8:f2:1e:34:95:41 media: Ethernet autoselect (10Gbase-SR <full-duplex>) status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE> ether 50:9a:4c:94:ad:72 media: Ethernet autoselect nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: sync options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE> ether 50:9a:4c:94:ad:73 inet6 fe80::529a:4cff:fe94:ad73%bge1 prefixlen 64 scopeid 0x8 inet 10.10.56.1 netmask 0xfffffffc broadcast 10.10.56.3 media: Ethernet autoselect (1000baseT <full-duplex,master>) status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> enc0: flags=41<UP,RUNNING> metric 0 mtu 1536 groups: enc nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> pflog0: flags=100<PROMISC> metric 0 mtu 33160 groups: pflog pfsync0: flags=41<UP,RUNNING> metric 0 mtu 1500 pfsync: syncdev: bge1 syncpeer: 10.10.56.2 maxupd: 128 defer: off syncok: 1 groups: pfsync lagg0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 inet6 fe80::faf2:1eff:fe34:9540%lagg0 prefixlen 64 scopeid 0xd laggproto failover lagghash l2,l3,l4 laggport: ixl0 flags=5<MASTER,ACTIVE> laggport: ixl1 flags=0<> groups: lagg media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lagg0.8: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: LANMaMue options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 inet6 fe80::faf2:1eff:fe34:9540%lagg0.8 prefixlen 64 scopeid 0xe inet 192.168.8.252 netmask 0xffffff00 broadcast 192.168.8.255 inet 192.168.8.254 netmask 0xffffff00 broadcast 192.168.8.255 vhid 8 groups: vlan carp: MASTER vhid 8 advbase 5 advskew 1 vlan: 8 vlanpcp: 0 parent interface: lagg0 media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lagg0.24: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: PrintMaMue options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 inet6 fe80::faf2:1eff:fe34:9540%lagg0.24 prefixlen 64 scopeid 0xf inet 192.168.24.252 netmask 0xffffff00 broadcast 192.168.24.255 inet 192.168.24.254 netmask 0xffffff00 broadcast 192.168.24.255 vhid 24 groups: vlan carp: MASTER vhid 24 advbase 5 advskew 1 vlan: 24 vlanpcp: 0 parent interface: lagg0 media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lagg0.109: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: VoiceMaMue options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 inet6 fe80::faf2:1eff:fe34:9540%lagg0.109 prefixlen 64 scopeid 0x10 inet 192.168.109.252 netmask 0xffffff00 broadcast 192.168.109.255 inet 192.168.109.254 netmask 0xffffff00 broadcast 192.168.109.255 vhid 109 groups: vlan carp: MASTER vhid 109 advbase 5 advskew 1 vlan: 109 vlanpcp: 0 parent interface: lagg0 media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lagg0.65: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: CarrierVlanLWL options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 inet6 fe80::faf2:1eff:fe34:9540%lagg0.65 prefixlen 64 scopeid 0x11 inet 10.10.65.4 netmask 0xfffffff0 broadcast 10.10.65.15 inet 10.10.65.6 netmask 0xfffffff0 broadcast 10.10.65.15 vhid 65 groups: vlan carp: MASTER vhid 65 advbase 5 advskew 1 vlan: 65 vlanpcp: 0 parent interface: lagg0 media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lagg0.64: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: CarrierVLanWlan options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 inet6 fe80::faf2:1eff:fe34:9540%lagg0.64 prefixlen 64 scopeid 0x12 inet 10.10.64.4 netmask 0xfffffff0 broadcast 10.10.64.15 inet 10.10.64.6 netmask 0xfffffff0 broadcast 10.10.64.15 vhid 64 groups: vlan carp: MASTER vhid 64 advbase 5 advskew 1 vlan: 64 vlanpcp: 0 parent interface: lagg0 media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lagg0.11: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: MgmtMaMue options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 inet6 fe80::faf2:1eff:fe34:9540%lagg0.11 prefixlen 64 scopeid 0x13 inet 192.168.11.252 netmask 0xffffff00 broadcast 192.168.11.255 inet 192.168.11.254 netmask 0xffffff00 broadcast 192.168.11.255 vhid 11 inet 10.10.55.2 netmask 0xfffffff0 broadcast 10.10.55.15 groups: vlan carp: MASTER vhid 11 advbase 1 advskew 0 vlan: 11 vlanpcp: 0 parent interface: lagg0 media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lagg0.71: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: ErfasserLAN options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6> ether f8:f2:1e:34:95:40 inet6 fe80::faf2:1eff:fe34:9540%lagg0.71 prefixlen 64 scopeid 0x14 inet 192.168.71.252 netmask 0xffffff00 broadcast 192.168.71.255 inet 192.168.71.254 netmask 0xffffff00 broadcast 192.168.71.255 vhid 71 groups: vlan carp: MASTER vhid 71 advbase 1 advskew 0 vlan: 71 vlanpcp: 0 parent interface: lagg0 media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>I have deactivated dhcp server and enabled dhcp forwarding again with the values as there where and saved it:
but unter /conf/config.xml I cat NOT find anything about dhcp forwarding. Even the gui said it was saved. (Did I look on the wrong place?)
This is out of the 2.4.4p1 config
<dhcrelay> <enable></enable> <interface>opt1,opt3,opt7,opt8</interface> <agentoption></agentoption> <server>192.168.1.28,192.168.1.27</server> </dhcrelay> - DHCP Relay configuration (screenshot or
-
@viktor_g
Also from my environment.. (first set under 2.4.5_1, second under 2.5.0).<dhcrelay> <enable></enable> <interface>lan</interface> <agentoption></agentoption> <server>192.168.99.1</server> </dhcrelay>Routing tables Internet: Destination Gateway Flags Netif Expire default 100.64.44.1 UGS vmx0 100.64.44.0/24 link#1 U vmx0 100.64.44.3 link#1 UHS lo0 127.0.0.1 link#3 UH lo0 192.168.0.0/16 100.64.44.1 UGS vmx0 192.168.192.0/24 link#2 U vmx1 192.168.192.1 link#2 UHS lo0 Internet6: Destination Gateway Flags Netif Expire ::1 link#3 UH lo0 fe80::%vmx0/64 link#1 U vmx0 fe80::20c:29ff:fe24:ebd7%vmx0 link#1 UHS lo0 fe80::%vmx1/64 link#2 U vmx1 fe80::20c:29ff:fe24:ebe1%vmx1 link#2 UHS lo0 fe80::%lo0/64 link#3 U lo0 fe80::1%lo0 link#3 UHS lo0vmx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=60009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:0c:29:24:eb:d7 hwaddr 00:0c:29:24:eb:d7 inet6 fe80::20c:29ff:fe24:ebd7%vmx0 prefixlen 64 scopeid 0x1 inet 100.64.44.3 netmask 0xffffff00 broadcast 100.64.44.255 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet autoselect status: active vmx1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=60009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:0c:29:24:eb:e1 hwaddr 00:0c:29:24:eb:e1 inet6 fe80::20c:29ff:fe24:ebe1%vmx1 prefixlen 64 scopeid 0x2 inet 192.168.192.1 netmask 0xffffff00 broadcast 192.168.192.255 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet autoselect status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo enc0: flags=0<> metric 0 mtu 1536 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: enc pfsync0: flags=0<> metric 0 mtu 1500 groups: pfsync pflog0: flags=100<PROMISC> metric 0 mtu 33160 groups: pflogAnd from 2.5.0, immediately after upgrading.
-<dhcrelay> <enable/> <interface>lan</interface> <agentoption/> <server>192.168.99.1</server> </dhcrelay>Routing tables Internet: Destination Gateway Flags Netif Expire default 100.64.44.1 UGS vmx0 100.64.44.0/24 link#1 U vmx0 100.64.44.3 link#1 UHS lo0 127.0.0.1 link#4 UH lo0 192.168.0.0/16 100.64.44.1 UGS vmx0 192.168.192.0/24 link#2 U vmx1 192.168.192.1 link#2 UHS lo0 Internet6: Destination Gateway Flags Netif Expire ::1 link#4 UH lo0 fe80::%vmx0/64 link#1 U vmx0 fe80::20c:29ff:fe24:ebd7%vmx0 link#1 UHS lo0 fe80::%vmx1/64 link#2 U vmx1 fe80::20c:29ff:fe24:ebe1%vmx1 link#2 UHS lo0 fe80::%lo0/64 link#4 U lo0 fe80::1%lo0 link#4 UHS lo0vmx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: WAN options=e000bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:0c:29:24:eb:d7 inet6 fe80::20c:29ff:fe24:ebd7%vmx0 prefixlen 64 scopeid 0x1 inet 100.64.44.3 netmask 0xffffff00 broadcast 100.64.44.255 media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> vmx1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: LAN options=e000bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:0c:29:24:eb:e1 inet6 fe80::20c:29ff:fe24:ebe1%vmx1 prefixlen 64 scopeid 0x2 inet 192.168.192.1 netmask 0xffffff00 broadcast 192.168.192.255 media: Ethernet autoselect status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> enc0: flags=0<> metric 0 mtu 1536 groups: enc nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> pflog0: flags=100<PROMISC> metric 0 mtu 33160 groups: pflog pfsync0: flags=0<> metric 0 mtu 1500 groups: pfsync -
@victor_g
Correction: Having moved the backup file from 2.4.5 across the divide, it is as below..
Errors introduced by rekeying and not reading what's on the screen.
-<dhcrelay> <enable/> <interface>lan</interface> <agentoption/> <server>192.168.123.1</server> </dhcrelay> -
Our dhcp relay service failure on 2.5.0 update seems to be hardware specific.
Netgate XG-1537 = success 2 out 2 (version 21.02)
VMware 6.5 = success 4 out of 4
Supermicro 1U server (not sure of flavor, rear facing ports) 1 out of 1
Supermicro CSE-505-203B = fail 2 out of 2
Supermicro SYS-5018D-FN8T = fail 4 out of 4Have not tried bare metal reload on failures yet.
-
I think i found the root cause.
DHCP-Server is Upstream (behind) WAN.
DHCP-Relay for example only on LAN.At least i found a hint in Syslog:
Feb 22 16:01:17 check_reload_status 363 Syncing firewall
Feb 22 16:01:18 php-fpm 326 /services_dhcp_relay.php: No suitable upstream interfaces found for running dhcrelay!I guess i know where the problem resides.
Our default configuration sets the dhcp-relay only for the interfaces, not for wan. Our DHCP-Servers resides are mostly upstream on the WAN side. We have some firewalls where that is different.
/etc/inc/services.inc
$srvifaces = array(); foreach ($srvips as $srcidx => $srvip) { $destif = guess_interface_from_ip($srvip); if (!empty($destif) && !is_pseudo_interface($destif)) { $srvifaces[] = $destif; } } /* Check for relays in the same subnet as clients so they can bind for * either direction (up or down) */ $srvrelayifs = array_intersect($dhcrelayifs, $srvifaces); /* The server interface(s) should not be in this list */ $dhcrelayifs = array_diff($dhcrelayifs, $srvifaces); /* Remove the dual-role interfaces from up and down lists */ $srvifaces = array_diff($srvifaces, $srvrelayifs); $dhcrelayifs = array_diff($dhcrelayifs, $srvrelayifs); /* fire up dhcrelay */ if (empty($dhcrelayifs) && empty($srvrelayifs)) { log_error(gettext("No suitable downstream interfaces found for running dhcrelay!")); return; /* XXX */ } if (empty($srvifaces) && empty($srvrelayifs)) { # Error is here log_error(gettext("No suitable upstream interfaces found for running dhcrelay!")); return; /* XXX */ }My dhcp-Server resides outside of any net within the firewall, therefore $servifaces
is empty, resulting in the error in syslog.My fix is to explicit add the upstream if there is none. I am not quite sure if this is the best variant. I would think that fixing guess_interface_from_ip() might be a better way.
if (empty($srvifaces)){ $srvifaces[] = "vmx0"; } if (empty($srvifaces) && empty($srvrelayifs)) { log_error(gettext("No suitable upstream interfaces found for running dhcrelay!")); return; /* XXX */ }If there is anything else you need to know please let me know.
-
@victor_g
Further investigation on the upgraded 2.5.0 production environment shows (in/var/log/dhcpd.log)Feb 22 15:41:48 wight dhcrelay[82265]: Internet Systems Consortium DHCP Relay Agent 4.4.2 Feb 22 15:41:48 wight dhcrelay[82265]: Copyright 2004-2020 Internet Systems Consortium. Feb 22 15:41:48 wight dhcrelay[82265]: All rights reserved. Feb 22 15:41:48 wight dhcrelay[82265]: For info, please visit https://www.isc.org/software/dhcp/ **Feb 22 15:41:48 wight dhcrelay[82265]: Unsupported device type 24 for "lo0"** Feb 22 15:41:48 wight dhcrelay[82265]: Feb 22 15:41:48 wight dhcrelay[82265]: If you think you have received this message due to a bug rather Feb 22 15:41:48 wight dhcrelay[82265]: than a configuration issue please read the section on submitting Feb 22 15:41:48 wight dhcrelay[82265]: bugs on either our web page at www.isc.org or in the README file Feb 22 15:41:48 wight dhcrelay[82265]: before submitting a bug. These pages explain the proper Feb 22 15:41:48 wight dhcrelay[82265]: process and the information we find helpful for debugging. Feb 22 15:41:48 wight dhcrelay[82265]: Feb 22 15:41:48 wight dhcrelay[82265]: exiting.So perhaps the default upgrade is adding lo0 to the dhcrelay startup process?
The equivalent from the 2.4.5_1 environment is as follows:
Feb 22 15:47:00 wight dhcrelay: Internet Systems Consortium DHCP Relay Agent 4.4.1 Feb 22 15:47:00 wight dhcrelay: Copyright 2004-2018 Internet Systems Consortium. Feb 22 15:47:00 wight dhcrelay: All rights reserved. Feb 22 15:47:00 wight dhcrelay: For info, please visit https://www.isc.org/software/dhcp/ Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx4/00:0c:29:10:bf:e3 Feb 22 15:47:00 wight dhcrelay: Sending on BPF/vmx4/00:0c:29:10:bf:e3 Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx7.888/00:0c:29:10:bf:15 Feb 22 15:47:00 wight dhcrelay: Sending on BPF/vmx7.888/00:0c:29:10:bf:15 Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx6/00:0c:29:10:bf:ed Feb 22 15:47:00 wight dhcrelay: Sending on BPF/vmx6/00:0c:29:10:bf:ed Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx5/00:0c:29:10:bf:0b Feb 22 15:47:00 wight dhcrelay: Sending on BPF/vmx5/00:0c:29:10:bf:0b Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx3/00:0c:29:10:bf:01 Feb 22 15:47:00 wight dhcrelay: Sending on BPF/vmx3/00:0c:29:10:bf:01 Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx2/00:0c:29:10:bf:d9 Feb 22 15:47:00 wight dhcrelay: Sending on BPF/vmx2/00:0c:29:10:bf:d9 Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx1/00:0c:29:10:bf:f7 Feb 22 15:47:00 wight dhcrelay: Sending on BPF/vmx1/00:0c:29:10:bf:f7 Feb 22 15:47:00 wight dhcrelay: Sending on Socket/fallback -
Ok i have to add, that this is a solution (WAN is always vmx0) for my case. The physical interface of another system has sure another name,
<interfaces>
<wan>
<enable></enable>
<if>vmx0</if>
Therefore more general it is s.th. like
$config[interfaces][wan][if]
.. -
@fwcheck There's definitely something odd going on.
In the test scenario, I have a similar environment, with DHCP server on the dirty (WAN) side, using vmx0. This seems to be working correctly, as I get vmx0 in the$srvifaceslist.
But nolo0in any list.
Now adding more elements to the test environment to find the thing that triggers
lo0to get added to the list. -
@johnsdixon said in Update to 2.5.0 broke DHCP relay:
But no lo0 in any list.
Isn't that a good thing ?
lo0 is the local host or 127.0.0.1
dhcrelay can't operate on "lo0" :@johnsdixon said in Update to 2.5.0 broke DHCP relay:
Feb 22 15:41:48 wight dhcrelay[82265]: Unsupported device type 24 for "lo0"
which is rather logic.
-
@gertjan But my production environment generates a startup command for the DHCP relay with
lo0included.
This is not there in 2.4.5_1, but following an upgrade to 2.5.0 this appears, and there is no functioning DHCP relay process started by default in that situation. What I'm trying to do is work out what is triggering the inclusion of thelo0within the startup process.
There is nolo0anywhere in my config, nor has disabling services (eg. squid, OpenVPN) on the production configuration gained me working DHCP forwarding. -
Redmine issue created:
https://redmine.pfsense.org/issues/11523 -
I tried the beta of 2.5, and discovered the same thing.
I posted my 2.5 findings in here:
[https://forum.netgate.com/topic/157022/not-sure-if-it-is-a-bug-or-not-dhcprelay-in-2-5?_=1614502774329](link url)Hope this helps.
I have upgraded to 2.5, and it seems to be working on my setup.Cheers
Elfranko
-
@viktor_g
I can confirm, that this issue relates to routing as already mentioned on redmine, and it doesn't exist in earlier Versions of pfSense.Having this configuration, where LAN is for Management only, and WAN is for Connection to Internet Router, DHCP-Server is on opt2, and Test-Computer trying to get IP via DHCP is on opt3:
<interfaces> <wan> <enable></enable> <if>hn2</if> <blockbogons></blockbogons> <descr><![CDATA[WAN]]></descr> <spoofmac></spoofmac> <ipaddr>172.30.0.99</ipaddr> <subnet>16</subnet> <gateway>WANGW</gateway> </wan> <lan> <enable></enable> <if>hn0</if> <ipaddr>10.100.0.99</ipaddr> <subnet>16</subnet> <gateway></gateway> <gatewayv6></gatewayv6> <descr><![CDATA[LAN]]></descr> </lan> <opt2> <descr><![CDATA[TestDC]]></descr> <if>hn3</if> <enable></enable> <spoofmac></spoofmac> <ipaddr>10.199.0.1</ipaddr> <subnet>24</subnet> </opt2> <opt3> <descr><![CDATA[Test1]]></descr> <if>hn1</if> <enable></enable> <spoofmac></spoofmac> <ipaddr>10.99.1.1</ipaddr> <subnet>24</subnet> </opt3> </interfaces> <staticroutes> <route> <network>10.0.0.0/8</network> <gateway>Null4</gateway> <descr><![CDATA[Default bei RFC 1918, Private Class A]]></descr> </route> <route> <network>172.16.0.0/12</network> <gateway>Null4</gateway> <descr><![CDATA[Default bei RFC 1918, Private Class B]]></descr> </route> <route> <network>192.168.0.0/16</network> <gateway>Null4</gateway> <descr><![CDATA[Default bei RFC 1918, Private Class C]]></descr> </route> </staticroutes> <dhcrelay> <enable></enable> <interface>opt3</interface> <agentoption></agentoption> <server>10.199.0.11</server> </dhcrelay>The NULL-Routes are to avoid Packets with local Addresses going to Internet (implicit Routes of direct attached Subnets have higher Priority).
With this configuration you cannot start DHCP-Relay Service (dhcrelay).
If you modify the NULL-Route "10.0.0.0/8" to something where the Subnet to the DHCP-Server is not part of (in my configuration e.g. "10.0.0.0/9"), then everything works fine.
Remark: After modifying Routes you have to reboot pfSense, because already existing routes were not replaced, but the modified route is added (no automatic flush of routing cache).
-
Try to apply Patch ID 7990de53bfc8267d1dd96636a175929a35cbe664 to fix DHCP Relay issue
see https://redmine.pfsense.org/issues/11475
@roland_v said in Update to 2.5.0 broke DHCP relay:
Remark: After modifying Routes you have to reboot pfSense, because already existing routes were not replaced, but the modified route is added (no automatic flush of routing cache).
Could you create a new redmine issue for this?
-
@viktor_g
Because I'm not able to build pfSense from source, I tried last development snapshot built on Tue Mar 02 01:18:30 EST 2021.With this version the DHCP-Relay works as expected.
For "Error on updating routing table after modifying static routes" I will open a new redmin issue as requested.
-
@viktor_g said in Update to 2.5.0 broke DHCP relay:
Try to apply Patch ID 7990de53bfc8267d1dd96636a175929a35cbe664 to fix DHCP Relay issue
Thanks, this patch fixed my identical problem.
For future reference, because some people might not know about it: See https://docs.netgate.com/pfsense/en/latest/development/system-patches.html for how to apply such patches to an existing installation.
--
Christian -
Hi,
just stepped on the same issue with PfSense 2.6.0
The Patch didnt pass the check, so i can´t apply it.My setup contains several LAN adapters leading to several (/24) Subnets.
The DHCP server is reachable on a remote system via Open VPN.Can You help me out?
/usr/bin/patch --directory='/' -t --strip '2' -i '/var/patches/6241d97843a1b.patch' --check --forward --ignore-whitespace Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |From 7990de53bfc8267d1dd96636a175929a35cbe664 Mon Sep 17 00:00:00 2001 |From: Viktor G <viktor@netgate.com> |Date: Thu, 25 Feb 2021 16:42:35 +0300 |Subject: [PATCH] route_get() optimization. Fixes #11475 | |--- | src/etc/inc/interfaces.inc | 2 +- | src/etc/inc/util.inc | 50 +++++++++++++++++++++++++++++--------- | 2 files changed, 39 insertions(+), 13 deletions(-) | |diff --git a/src/etc/inc/interfaces.inc b/src/etc/inc/interfaces.inc |index 35206915d92..307e76edcef 100644 |--- a/src/etc/inc/interfaces.inc |+++ b/src/etc/inc/interfaces.inc -------------------------- Patching file etc/inc/interfaces.inc using Plan A... Ignoring previously applied (or reversed) patch. Hunk #1 ignored at 6041. 1 out of 1 hunks ignored while patching etc/inc/interfaces.inc Hmm... The next patch looks like a unified diff to me... The text leading up to this was: -------------------------- |diff --git a/src/etc/inc/util.inc b/src/etc/inc/util.inc |index 6f94b0da41e..bc5178dee61 100644 |--- a/src/etc/inc/util.inc |+++ b/src/etc/inc/util.inc -------------------------- Patching file etc/inc/util.inc using Plan A... Ignoring previously applied (or reversed) patch. Hunk #1 ignored at 2692. Hunk #2 ignored at 2707. Hunk #3 ignored at 2755. 3 out of 3 hunks ignored while patching etc/inc/util.inc done /usr/bin/patch --directory='/' -f --strip '2' -i '/var/patches/6241d97843a1b.patch' --check --reverse --ignore-whitespace Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |From 7990de53bfc8267d1dd96636a175929a35cbe664 Mon Sep 17 00:00:00 2001 |From: Viktor G <viktor@netgate.com> |Date: Thu, 25 Feb 2021 16:42:35 +0300 |Subject: [PATCH] route_get() optimization. Fixes #11475 | |--- | src/etc/inc/interfaces.inc | 2 +- | src/etc/inc/util.inc | 50 +++++++++++++++++++++++++++++--------- | 2 files changed, 39 insertions(+), 13 deletions(-) | |diff --git a/src/etc/inc/interfaces.inc b/src/etc/inc/interfaces.inc |index 35206915d92..307e76edcef 100644 |--- a/src/etc/inc/interfaces.inc |+++ b/src/etc/inc/interfaces.inc -------------------------- Patching file etc/inc/interfaces.inc using Plan A... Hunk #1 succeeded at 6041 (offset -118 lines). Hmm... The next patch looks like a unified diff to me... The text leading up to this was: -------------------------- |diff --git a/src/etc/inc/util.inc b/src/etc/inc/util.inc |index 6f94b0da41e..bc5178dee61 100644 |--- a/src/etc/inc/util.inc |+++ b/src/etc/inc/util.inc -------------------------- Patching file etc/inc/util.inc using Plan A... Hunk #1 succeeded at 2692 (offset 43 lines). Hunk #2 failed at 2705. Hunk #3 succeeded at 2690 (offset 4 lines). 1 out of 3 hunks failed while patching etc/inc/util.inc done -
@wurst You can simply upgrade to the latest pfSense version
-
