Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    pfSense HA LAN Interfaces Only

    Scheduled Pinned Locked Moved
    HA/CARP/VIPs
    2
    91
    16.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      CloudNode @viragomann
      last edited by

      @viragomann i did this on the master now and i saw it synced over to the backup. I rebooted the backup again as well.
      dcb43cb0-d713-43ba-8b64-c9b34c82fc11-image.png

      I ran a packet capture on the LAN (backup pf) and i see a few of these lines. IP: 76.64.x.x is my wan
      10:54:16.598225 IP 76.64.x.x > 8.8.8.8: ICMP echo request, id 13920, seq 321, length 9

      but GW still shows offline
      cbfaf116-dab6-4bb1-b620-ed5fbda515d0-image.png

      When i run a ping to 8.8.8.8 using backup, i get this

      PING 8.8.8.8 (8.8.8.8): 56 data bytes
      64 bytes from 8.8.8.8: icmp_seq=0 ttl=115 time=2.599 ms

      --- 8.8.8.8 ping statistics ---
      3 packets transmitted, 1 packets received, 66.7% packet loss
      round-trip min/avg/max/stddev = 2.599/2.599/2.599/0.000 ms

      V 1 Reply Last reply Reply Quote 0
      • V
        viragomann @CloudNode
        last edited by viragomann

        @iptvcld said in pfSense HA LAN Interfaces Only:

        I ran a packet capture on the LAN (backup pf) and i see a few of these lines. IP: 76.64.x.x is my wan
        10:54:16.598225 IP 76.64.x.x > 8.8.8.8: ICMP echo request, id 13920, seq 321, length 9

        Even if the WAN cable is disconnected??
        I was assuming that the WAN is offline, so not clear, why it use the WAN IP.

        C 1 Reply Last reply Reply Quote 0
        • C
          CloudNode @viragomann
          last edited by

          @viragomann That is correct Sir; i do not have my WAN connected to my backup pf right now

          8288f915-22ad-4cef-a7e2-8a1e05342ff8-image.png

          V 1 Reply Last reply Reply Quote 0
          • V
            viragomann @CloudNode
            last edited by

            @iptvcld
            Not clear, what's wrong here.
            As first step for troubleshooting you can remove the monitoring IP from the LAN gateway on the backup. Hence it should monitor the masters LAN and the gateway state should get online.
            But not sure if the failover will work after.

            C 2 Replies Last reply Reply Quote 0
            • C
              CloudNode @viragomann
              last edited by

              @viragomann I ran a packet cap again and i am seeing those monitoring requests come in as well:

              11:14:31.073869 IP 8.8.8.8.853 > 192.168.2.81.17018: tcp 0
              11:14:31.073887 IP 76.64.x.x.11762 > 8.8.8.8.853: tcp 0

              V 1 Reply Last reply Reply Quote 0
              • C
                CloudNode @viragomann
                last edited by

                @viragomann When i remove the monitoring ip from the GW; yes it puts the master LAN IP in there and yes it shows Green and Online but no internet.

                Ah i really hoped this would have worked out; was such a nice idea to have.

                1 Reply Last reply Reply Quote 0
                • V
                  viragomann @CloudNode
                  last edited by

                  @iptvcld said in pfSense HA LAN Interfaces Only:

                  I ran a packet cap again and i am seeing those monitoring requests come in as well:
                  11:14:31.073869 IP 8.8.8.8.853 > 192.168.2.81.17018: tcp 0
                  11:14:31.073887 IP 76.64.x.x.11762 > 8.8.8.8.853: tcp 0

                  So you're using 8.8.8.8 for DNS resolution as well.
                  Possibly that's an issue when you've stated the WAN gateway in System > General Setup.
                  However, when using this IP for gateway monitoring, pfSense will automatically add a static route and point it to the respective gateway. So there might be a conflict.

                  As mentioned above, you can use any other public IP for gateway monitoring which is responding to pings. It might be a good idea, to use another IP.

                  Also you should have a check at System > Advanced > Miscellaneous > State Killing on Gateway Failure.

                  For further testing you can set the WAN gateway as down manually on the backup.

                  C 1 Reply Last reply Reply Quote 0
                  • C
                    CloudNode @viragomann
                    last edited by

                    @viragomann Correct; i am using 8.8.8.8 and 8.8.4.4 as DNS Res via system > gateway.

                    I have now changed my GW monitoring IP to 1.1.1.1 on the secondary pf. Also on the secondary pf i have placed a CHECK under System > Advanced > Miscellaneous > State Killing on Gateway Failure.

                    When i try to ping 8.8.8.8 from the secondary; i get this timeout

                    PING 8.8.8.8 (8.8.8.8): 56 data bytes
92 bytes from 127.0.0.1: Time to live exceeded
Vr HL TOS  Len   ID Flg  off TTL Pro  cks      Src      Dst
 4  5  00 0054 263f   0 0000  01  01 0000 127.0.0.1  8.8.8.8 

92 bytes from 127.0.0.1: Time to live exceeded
Vr HL TOS  Len   ID Flg  off TTL Pro  cks      Src      Dst
 4  5  00 0054 b74f   0 0000  01  01 0000 127.0.0.1  8.8.8.8 

92 bytes from 127.0.0.1: Time to live exceeded
Vr HL TOS  Len   ID Flg  off TTL Pro  cks      Src      Dst
 4  5  00 0054 66ba   0 0000  01  01 0000 127.0.0.1  8.8.8.8 


--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss

                    I have marked my PPPOE WAN as down on the 2nd pf as well.
                    This is so bizarre..
                    I also have just an open rule for LAN
                    6de4178c-6b2a-4d7d-ad19-2afa3c0c36dc-image.png

                    V 1 Reply Last reply Reply Quote 0
                    • V
                      viragomann @CloudNode
                      last edited by

                      @iptvcld said in pfSense HA LAN Interfaces Only:

                      When i try to ping 8.8.8.8 from the secondary; i get this timeout

                      You cannot use 8.8.8.8 for troubleshooting, since you direct it to WAN gateway.
                      However, for getting the DNS resolution work on the secondary when the WAN cable is connected to the primary, you should set the gateway to "none" for all DNS servers in System > General Setup.

                      I have now changed my GW monitoring IP to 1.1.1.1 on the secondary pf.

                      So try to ping 1.1.1.1 while taking a capture on the LAN interface.

                      C 1 Reply Last reply Reply Quote 0
                      • C
                        CloudNode @viragomann
                        last edited by

                        @viragomann My master pf DNS settings like like this
                        c34d0b73-4620-42e5-a695-24d1dc4b5a81-image.png

                        and secondary pf is the same
                        f3bcfe38-b3c2-43f3-9bcc-59509a4ac5dd-image.png

                        When i ping 1.1.1.1 in seconday the packet capture just gave this

                        12:57:15.477198 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 18433, seq 797, length 9
                        V 1 Reply Last reply Reply Quote 0
                        • V
                          viragomann @CloudNode
                          last edited by

                          @iptvcld said in pfSense HA LAN Interfaces Only:

                          When i ping 1.1.1.1 in seconday the packet capture just gave this
                          12:57:15.477198 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 18433, seq 797, length 9

                          You should see the same on the masters LAN. Check that out, please.

                          C 1 Reply Last reply Reply Quote 0
                          • C
                            CloudNode @viragomann
                            last edited by

                            @viragomann thats correct; i just ran a packet cap on master LAN and then sent a 1.1.1.1 ping from the secondary pf

                            13:05:44.735976 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 18433, seq 1785, length 9
                            V 1 Reply Last reply Reply Quote 0
                            • V
                              viragomann @CloudNode
                              last edited by

                              @iptvcld
                              Well, so 1.1.1.1 is routed to the masters LAN address.
                              Now, if you take a capture on the masters WAN you should also see the ICMP packets to 1.1.1.1, but coming from the WAN IP.

                              If that's not the case, either the firewall rule or the outbound NAT on the master might failing anyhow.

                              C 3 Replies Last reply Reply Quote 0
                              • C
                                CloudNode @viragomann
                                last edited by

                                @viragomann Ran a packet cap on master and i see this request 3 times

                                13:10:40.370864 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 18433, seq 2360, length 9

                                seems to be coming from the secondary pf LAN IP still and not the WAN IP

                                Outbound NAT on master is this:
                                525a045c-3692-4aaa-a82a-e04d3aa486ca-image.png

                                And LAN Rules
                                a368e097-3a10-4ad5-9bd4-8c50a2666839-image.png

                                1 Reply Last reply Reply Quote 0
                                • C
                                  CloudNode @viragomann
                                  last edited by

                                  @viragomann Ran it again and i see this

                                  13:17:05.527815 IP 76.64.x.x > 1.1.1.1: ICMP echo request, id 55322, seq 0, length 64
13:17:05.542715 IP 1.1.1.1 > 76.64.x.x: ICMP echo reply, id 55322, seq 0, length 64

                                  then

                                  13:17:05.562166 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 34782, seq 78, length 9

                                  PING 1.1.1.1 (1.1.1.1): 56 data bytes
                                  64 bytes from 1.1.1.1: icmp_seq=0 ttl=55 time=15.187 ms

                                  --- 1.1.1.1 ping statistics ---
                                  3 packets transmitted, 1 packets received, 66.7% packet loss
                                  round-trip min/avg/max/stddev = 15.187/15.187/15.187/0.000 ms

                                  V 1 Reply Last reply Reply Quote 0
                                  • C
                                    CloudNode @viragomann
                                    last edited by

                                    @viragomann Does this need to be unchecked under my WAN interface?
                                    Block private networks and loopback addresses

                                    fc8b8c33-e5c7-4253-ac68-050b04b1b2a9-image.png

                                    V 1 Reply Last reply Reply Quote 0
                                    • V
                                      viragomann @CloudNode
                                      last edited by

                                      @iptvcld said in pfSense HA LAN Interfaces Only:

                                      Ran it again and i see this
                                      13:17:05.527815 IP 76.64.x.x > 1.1.1.1: ICMP echo request, id 55322, seq 0, length 64
                                      13:17:05.542715 IP 1.1.1.1 > 76.64.x.x: ICMP echo reply, id 55322, seq 0, length 64

                                      then
                                      13:17:05.562166 IP 192.168.2.81 > 1.1.1.1: ICMP echo request, id 34782, seq 78, length 9

                                      PING 1.1.1.1 (1.1.1.1): 56 data bytes

                                      Strange!

                                      Check the masters state table and filter for 1.1.1.1 after pinging from backup.

                                      C 3 Replies Last reply Reply Quote 0
                                      • V
                                        viragomann @CloudNode
                                        last edited by

                                        @iptvcld said in pfSense HA LAN Interfaces Only:

                                        @viragomann Does this need to be unchecked under my WAN interface?
                                        Block private networks and loopback addresses

                                        fc8b8c33-e5c7-4253-ac68-050b04b1b2a9-image.png

                                        No, this is only for incoming packets. There is no need to allow private addresses on WAN.

                                        1 Reply Last reply Reply Quote 0
                                        • C
                                          CloudNode @viragomann
                                          last edited by

                                          This post is deleted!
                                          1 Reply Last reply Reply Quote 0
                                          • C
                                            CloudNode @viragomann
                                            last edited by

                                            @viragomann This is the state table after pinging from 2nd
                                            428da5d7-7b48-472e-b40e-1b54110340db-image.png

                                            V 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post