[WORKAROUND] Unable to update and package install (ERROR: It was not possible to identify which pfSense kernel is installed)

stephenw10 · May 9, 2022, 4:13 PM

Can it resolve anything?

Didn't you have an issue very similar to this previously?

Sergei_Shablovsky · May 9, 2022, 5:47 PM

@stephenw10 said in Unable to update and package install (ERROR: It was not possible to identify which pfSense kernel is installed):

Can it resolve anything?

Unfortunately, NO

Also I check ipv6 settings everywhere,- nothing used.

Didn't you have an issue very similar to this previously?

No any similar...

Sergei_Shablovsky · May 9, 2022, 6:05 PM

@stephenw10

The problem come right after update from .xml backup file. Because of this I try to determine which section of .xml backup file impact on this: as I describe before, installing one-by-one. Trying installing packages before, and after restoring... But results are the same: all looks like ok, but after System section restoring - going to wrong state, and connection to outside partially loss..

I more than sure that with .xml backup file are all ok, because I make 3 copy of them on 3 different media.

Sergei_Shablovsky · May 9, 2022, 6:04 PM

@stephenw10

Today I found that:

if disable DNS Resolver
reboot
when enabling DNS Resolver
After pressing Save button on DNS Resolver webGUI page, the follow error appear on top of the page (not on separate pop-up or info/alert part of page, just on upper background):

Warning: file_put_contents(/var/unbound/sslcert.crt): failed to open stream: No such file or directory in /etc/inc/unbound.inc on line 314
Warning: chmod(): No such file or directory in /etc/inc/unbound.inc on line 315
Warning: file_put_contents(/var/unbound/sslcert.key): failed to open stream: No such file or directory in /etc/inc/unbound.inc on line 316
Warning: chmod(): No such file or directory in /etc/inc/unbound.inc on line 317

stephenw10 · May 9, 2022, 6:05 PM

You have pfBlocker in the config but not installed perhaps?

NollipfSense · May 10, 2022, 2:02 PM

It's saying update available today but still unable to update. I also tried installing pfBlockerNG, no luck.

stephenw10 · May 10, 2022, 2:25 PM

Hmm, you should be able to update the to April 26th snap. What does pkg -d update show?

NollipfSense · May 10, 2022, 9:15 PM

@stephenw10 Still does nothing then eventually goes back to the shell prompt.

stephenw10 · May 10, 2022, 10:02 PM

Looks like a general connectivity issue then. Try: pkg -d4 update

Sergei_Shablovsky · May 11, 2022, 12:36 AM

@stephenw10 said in Unable to update and package install (ERROR: It was not possible to identify which pfSense kernel is installed):

You have pfBlocker in the config but not installed perhaps?

Yes, in .xml backup file must be settings for pfBlockerNG. But now there are no any packages installed, due error in connectivity...

Sergei_Shablovsky · May 11, 2022, 12:34 AM

@stephenw10 said in Unable to update and package install (ERROR: It was not possible to identify which pfSense kernel is installed):

Hmm, you should be able to update the to April 26th snap. What does pkg -d update show?
Similar screen immediately, with

pfSense repository is up to date
All repositories are up to date

at the end of screen.

Sergei_Shablovsky · May 11, 2022, 12:55 AM

@stephenw10 said in Unable to update and package install (ERROR: It was not possible to identify which pfSense kernel is installed):

Looks like a general connectivity issue then. Try: pkg -d4 update

The same screen with “all are up to date”...

Need to note that 13) Update from console menu item in VGA console initiate update checking procedure and all looks like no any problem, just no new updates.
But Update from menu in webGUI (and also checking text string say “unable to ...”) give me the answer “Unable to check...”

Also when I try to install package (any of them), follow error happens:

>>> Upgrading pkg... done.
>>> Updating repositories metadata... 
Updating pfSense-core repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: . done
Processing entries: . done
pfSense-core repository update completed. 7 packages processed.
Updating pfSense repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: .......... done
Processing entries: .......... done
pfSense repository update completed. 513 packages processed.
All repositories are up to date.
ERROR: Unable to compare version of pfSense-repo

Sergei_Shablovsky · May 11, 2022, 12:39 AM

@stephenw10
Please look at my initial post, I mean on:

ADDED
There are also some mismatching on SSH keys level, because after restoring System section from backup .xml and hardware rebooting not possible to logging in webGUI: browser pop-up with “This browser must to support cookies** appear.

How to fix this?

stephenw10 · May 11, 2022, 12:44 PM

Do not restore single config sections. Only restore the full config.

You are missing some pkgs as we showed earlier. Try to install those. You will not be able to upgrade again until they are present.

Steve

NollipfSense · May 11, 2022, 4:20 PM

@stephenw10 That seems to be working...

stephenw10 · May 11, 2022, 4:56 PM

@nollipfsense Ok so in your case it was an IPv6 connectivity issue.

NollipfSense · May 12, 2022, 1:30 AM

@stephenw10 It seems that it was the last update before the developer shutdown as the date now appears as April 26.

Sergei_Shablovsky · May 12, 2022, 11:20 AM

@stephenw10 said in Unable to update and package install (ERROR: It was not possible to identify which pfSense kernel is installed):

Do not restore single config sections. Only restore the full config.

You are missing some pkgs as we showed earlier. Try to install those. You will not be able to upgrade again until they are present.

As I note before, I try both path before and unsuccessfully.

And of course, I read carefully Your suggestions, and if restore, doing that only from full .xml config file.

What about SSL key issue?

stephenw10 · May 12, 2022, 12:47 PM

Ok what I expect here is that you install a 2.7 snapshot clean (new snaps should be available later today).
Make sure that has connectivity as expected.
Then restore the complete config file and it should pull in the required packages at first boot.

If that's failing then something in the config file is breaking access to the pkg repo.

Check the repo line itself matches, for 2.7 is should be:

		<pkg_repo_conf_path>/usr/local/share/pfSense/pkg/repos/pfSense-repo-devel.conf</pkg_repo_conf_path>

Steve

Sergei_Shablovsky · May 14, 2022, 9:15 PM

@stephenw10 said in Unable to update and package install (ERROR: It was not possible to identify which pfSense kernel is installed):

Do not restore single config sections. Only restore the full config.

You are missing some pkgs as we showed earlier. Try to install those. You will not be able to upgrade again until they are present.

Steve

I was trying another one time:

bare metal install latest 2.7.0 from memstik-VGA console
cold restart
ping appear ok, traceroute appear ok, speedtest show full link utilization
restore from .xml backup file
cold restart
waiting ~4-5h about exclamation warning message disappear
cold restart
ping appear ok, traceroute appear ok, speedtest show full link utilization

Result:

No possible to check system update info in Dashboard / System Information / Version vidjet

Unable to check for updates

No possible to update system by System / Update

Retrieving Unable to check for updates

No possible to install any package by System / Package Installer

>>> Upgrading pkg... done.
>>> Updating repositories metadata... 
Updating pfSense-core repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: . done
Processing entries: . done
pfSense-core repository update completed. 7 packages processed.
Updating pfSense repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: .......... done
Processing entries: .......... done
pfSense repository update completed. 513 packages processed.
All repositories are up to date.
ERROR: Unable to compare version of pfSense-repo

Notice that 1 main alerts persist:

SSH KeyGen

pfSense has started creating missing SSH keys. SSH Startup will be delayed. Please note that reloading the filter rules and changes will be delayed until this operation is completed.

$ host -t srv _https._tcp.packages.netgate.com
_https._tcp.packages.netgate.com has SRV record 10 10 443 pkg00-atx.netgate.com.
_https._tcp.packages.netgate.com has SRV record 10 10 443 pkg01-atx.netgate.com.

$ host files01.netgate.com.
files01.netgate.com has address 208.123.73.209
files01.netgate.com has IPv6 address 2610:160:11:18::209

$ host files00.netgate.com.
files00.netgate.com has address 208.123.73.207
files00.netgate.com has IPv6 address 2610:160:11:18::207

# pkg-static update -f
Updating pfSense-core repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: . done
Processing entries: . done
pfSense-core repository update completed. 7 packages processed.
Updating pfSense repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: .......... done
Processing entries: .......... done
pfSense repository update completed. 513 packages processed.
All repositories are up to date.

pkg -d4 update

DBG(1)[60047]> pkg initialized
Updating pfSense-core repository catalogue...
DBG(1)[60047]> PkgRepo: verifying update for pfSense-core
DBG(1)[60047]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense-core.sqlite'
DBG(1)[60047]> Request to fetch pkg+https://packages-beta.netgate.com/packages/pfSense_master_amd64-core/meta.conf
DBG(1)[60047]> opening libfetch fetcher
DBG(1)[60047]> Fetch > libfetch: connecting
DBG(1)[60047]> Fetch: fetching from: https://pkg00-atx.netgate.com/packages/pfSense_master_amd64-core/meta.conf with opts "i4"
DBG(1)[60047]> Fetch: fetcher chosen: https
DBG(1)[60047]> Request to fetch pkg+https://packages-beta.netgate.com/packages/pfSense_master_amd64-core/packagesite.pkg
DBG(1)[60047]> opening libfetch fetcher
DBG(1)[60047]> Fetch > libfetch: connecting
DBG(1)[60047]> Fetch: fetching from: https://pkg00-atx.netgate.com/packages/pfSense_master_amd64-core/packagesite.pkg with opts "i4"
DBG(1)[60047]> Fetch: fetcher chosen: https
DBG(1)[60047]> Request to fetch pkg+https://packages-beta.netgate.com/packages/pfSense_master_amd64-core/packagesite.txz
DBG(1)[60047]> opening libfetch fetcher
DBG(1)[60047]> Fetch > libfetch: connecting
DBG(1)[60047]> Fetch: fetching from: https://pkg00-atx.netgate.com/packages/pfSense_master_amd64-core/packagesite.txz with opts "i4"
DBG(1)[60047]> Fetch: fetcher chosen: https
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
DBG(1)[60047]> PkgRepo: verifying update for pfSense
DBG(1)[60047]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense.sqlite'
DBG(1)[60047]> Request to fetch pkg+https://packages-beta.netgate.com/packages/pfSense_master_amd64-pfSense_devel/meta.conf
DBG(1)[60047]> opening libfetch fetcher
DBG(1)[60047]> Fetch > libfetch: connecting
DBG(1)[60047]> Fetch: fetching from: https://pkg00-atx.netgate.com/packages/pfSense_master_amd64-pfSense_devel/meta.conf with opts "i4"
DBG(1)[60047]> Fetch: fetcher chosen: https
DBG(1)[60047]> Request to fetch pkg+https://packages-beta.netgate.com/packages/pfSense_master_amd64-pfSense_devel/packagesite.pkg
DBG(1)[60047]> opening libfetch fetcher
DBG(1)[60047]> Fetch > libfetch: connecting
DBG(1)[60047]> Fetch: fetching from: https://pkg00-atx.netgate.com/packages/pfSense_master_amd64-pfSense_devel/packagesite.pkg with opts "i4"
DBG(1)[60047]> Fetch: fetcher chosen: https
DBG(1)[60047]> Request to fetch pkg+https://packages-beta.netgate.com/packages/pfSense_master_amd64-pfSense_devel/packagesite.txz
DBG(1)[60047]> opening libfetch fetcher
DBG(1)[60047]> Fetch > libfetch: connecting
DBG(1)[60047]> Fetch: fetching from: https://pkg00-atx.netgate.com/packages/pfSense_master_amd64-pfSense_devel/packagesite.txz with opts "i4"
DBG(1)[60047]> Fetch: fetcher chosen: https
pfSense repository is up to date.
All repositories are up to date.