Another instance of pfSense-upgrade is running. Try again later
-
Same issue for me here running an SG-3100 on 23.01.
Running the update via the GUI I get the error 'Another instance of pfSense-upgrade is running. Try again later'
And from the CLI, using option 13, I get the following errors:
Enter an option: 13 Segmentation fault (core dumped) failed to update the repository settings!!! failed to update the repository settings!!!Have there been any announcements from Netgate that I've missed? Usually it's smooth sailing for upgrades.
-
@crgbt I'm having the exact same issue
-
I think I also see this on a Netgate 7100
-
Is CLI in the WebGui in that case?
Did you try out the console (serial) and then
choosing option (13)? -
@Dobby_ The CLI output in my post is from the ‘real’ CLI (via SSH), rather than the Web GUI ‘Command Prompt’ page - I didn’t realise you could run the options through the ‘Command Prompt’ page actually!
Further update, I’ve tried forcing a pkg metadata update using ‘pkg-static update -f’ and a manual update check using ‘pfSense-upgrade -d -c’ with no success - the same errors are present, even after a system halt, power down (power out for 10 sec) and powered back up.
-
I was able to fix mine.
Go to system-update then Update settings and change it to previous version 23.01 and save it.
In console run: pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgrade
Once that completes go back to GUI and change back to current stable 23.05. Once that has saved, then go back to console and run the option 13 to upgrade. Worked like a champ for me. -
C crgbt referenced this topic on
-
This did not work for me. See the following output.
[23.01-RELEASE][admin@pfSense]/root: pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgrade pkg-static: Repository pfSense-core missing. 'pkg update' required pkg-static: No package database installed. Nothing to do! Updating pfSense-core repository catalogue... pkg-static: https://pfsense-plus-pkg00.atx.netgate.com/pfSense_plus-v23_01_armv7-core/meta.txz: Bad Request repository pfSense-core has no meta file, using default settings pkg-static: https://pfsense-plus-pkg00.atx.netgate.com/pfSense_plus-v23_01_armv7-core/packagesite.pkg: Bad Request pkg-static: https://pfsense-plus-pkg00.atx.netgate.com/pfSense_plus-v23_01_armv7-core/packagesite.txz: Bad Request Unable to update repository pfSense-core Updating pfSense repository catalogue... pkg-static: https://pfsense-plus-pkg01.atx.netgate.com/pfSense_plus-v23_01_armv7-pfSense_plus_v23_01/meta.txz: Bad Request repository pfSense has no meta file, using default settings pkg-static: https://pfsense-plus-pkg01.atx.netgate.com/pfSense_plus-v23_01_armv7-pfSense_plus_v23_01/packagesite.pkg: Bad Request pkg-static: https://pfsense-plus-pkg01.atx.netgate.com/pfSense_plus-v23_01_armv7-pfSense_plus_v23_01/packagesite.txz: Bad Request Unable to update repository pfSense Error updating repositories! [23.01-RELEASE][admin@pfSense]/root: exit Netgate 3100 - (output omitted) 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 13 Segmentation fault (core dumped) failed to update the repository settings!!! failed to update the repository settings!!! Netgate 3100 - Serial: (output omitted)edit also:
[23.01-RELEASE][admin@pfSense]/root: pkg update ld-elf.so.1: /usr/local/sbin/pkg: Undefined symbol "__libc_start1@FBSD_1.7"maybe it is related?
Thanks though
-
@s0m3f00l And you made sure to go into the GUI, to the update settings and change it tp previous version 23.01 then save before you did that, correct?
-
-
@s0m3f00l Well, that is unfortunate. I guess try that with other suggestions and see if combo of this works. It worked for me on bare metal, so was worth posting. Good luck!
-
Okay this one appears to work.
The basic process appears to be:
-
In Gui Set System Update to previous version
-
Goto console and enter 'pkg-static update -f'
-
In console enter 'pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo
pfSense-upgrade' -
'exit' the console
-
Goto GUI and change System Update to Current Stable (23.05) version
-
Goto admin page and use option '13'
-
Update starts and completes as normal.
Thanks to @Boboki for starting my path to upgrading.
See output below:
[23.01-RELEASE][admin@pfSense]/root: pkg-static update -f Updating pfSense-core repository catalogue... Fetching meta.conf: 100% 163 B 0.2kB/s 00:01 Fetching packagesite.pkg: 100% 2 KiB 1.8kB/s 00:01 Processing entries: 100% pfSense-core repository update completed. 7 packages processed. Updating pfSense repository catalogue... Fetching meta.conf: 100% 163 B 0.2kB/s 00:01 Fetching packagesite.pkg: 100% 142 KiB 145.7kB/s 00:01 Processing entries: 100% pfSense repository update completed. 501 packages processed. All repositories are up to date. [23.01-RELEASE][admin@pfSense]/root: pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgrade Nothing to do. Updating pfSense-core repository catalogue... pfSense-core repository is up to date. Updating pfSense repository catalogue... pfSense repository is up to date. All repositories are up to date. The following 3 package(s) will be affected (of 0 checked): Installed packages to be DOWNGRADED: pfSense-upgrade: 1.0_66 -> 1.0_61 [pfSense] pkg: 1.19.1_1 -> 1.18.4_4 [pfSense] Installed packages to be REINSTALLED: pfSense-repo-23.01 [pfSense] Number of packages to be reinstalled: 1 Number of packages to be downgraded: 2 9 MiB to be downloaded. [1/3] Fetching pfSense-repo-23.01.pkg: 100% 6 KiB 6.0kB/s 00:01 [2/3] Fetching pfSense-upgrade-1.0_61.pkg: 100% 22 KiB 22.5kB/s 00:01 [3/3] Fetching pkg-1.18.4_4.pkg: 100% 9 MiB 1.8MB/s 00:05 Checking integrity... done (0 conflicting) [1/3] Reinstalling pfSense-repo-23.01... [1/3] Extracting pfSense-repo-23.01: 100% [2/3] Downgrading pfSense-upgrade from 1.0_66 to 1.0_61... [2/3] Extracting pfSense-upgrade-1.0_61: 100% [3/3] Downgrading pkg from 1.19.1_1 to 1.18.4_4... [3/3] Extracting pkg-1.18.4_4: 100% You may need to manually remove /usr/local/etc/pkg.conf if it is no longer needed. [23.01-RELEASE][admin@pfSense]/root: exit exit Netgate 3100 - (OUTPUT OMITTED) *** Welcome to Netgate pfSense Plus 23.01-RELEASE (arm) on pfSense_Edge *** (OUTPUT OMITTED) 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 13 Your Netgate device has pfSense+ as part of your device purchase. >>> Setting vital flag on pfSense-upgrade... done. ERROR: It was not possible to determine pfSense-u-boot-3100 remote version ERROR: It was not possible to determine pkg remote version >>> Updating repositories metadata... Updating pfSense-core repository catalogue... Fetching meta.conf: . done Fetching packagesite.pkg: . done Processing entries: . done pfSense-core repository update completed. 7 packages processed. Updating pfSense repository catalogue... Fetching meta.conf: . done Fetching packagesite.pkg: .......... done Processing entries: .......... done pfSense repository update completed. 501 packages processed. All repositories are up to date. >>> Setting vital flag on pkg... done. Your packages are up to date Netgate 3100 - (OUTPUT OMITTED) *** Welcome to Netgate pfSense Plus 23.01-RELEASE (arm) on pfSense_Edge *** (OUTPUT OMITTED) 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 13 Your Netgate device has pfSense+ as part of your device purchase. >>> Updating repositories metadata... Updating pfSense-core repository catalogue... Fetching meta.conf: . done Fetching packagesite.pkg: . done Processing entries: . done pfSense-core repository update completed. 7 packages processed. Updating pfSense repository catalogue... Fetching meta.conf: . done Fetching packagesite.pkg: .......... done Processing entries: .......... done pfSense repository update completed. 501 packages processed. All repositories are up to date. Netgate 3100 - (OUTPUT OMITTED) *** Welcome to Netgate pfSense Plus 23.01-RELEASE (arm) on pfSense_Edge *** (OUTPUT OMITTED) 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 13 Your Netgate device has pfSense+ as part of your device purchase. >>> Updating repositories metadata... Updating pfSense-core repository catalogue... Fetching meta.conf: . done Fetching packagesite.pkg: . done Processing entries: . done pfSense-core repository update completed. 7 packages processed. Updating pfSense repository catalogue... Fetching meta.conf: . done Fetching packagesite.pkg: .......... done Processing entries: Processing entries............. done pfSense repository update completed. 515 packages processed. All repositories are up to date. >>> Upgrading pfSense-upgrade... done. Messages: Your Netgate device has pfSense+ as part of your device purchase. >>> Setting vital flag on pfSense-upgrade... done. >>> Updating repositories metadata... Updating pfSense-core repository catalogue... Fetching meta.conf: . done Fetching packagesite.pkg: . done Processing entries: . done pfSense-core repository update completed. 7 packages processed. Updating pfSense repository catalogue... Fetching meta.conf: . done Fetching packagesite.pkg: .......... done Processing entries: Processing entries............. done pfSense repository update completed. 515 packages processed. All repositories are up to date. >>> Setting vital flag on pkg... done. The following 115 package(s) will be affected (of 0 checked): New packages to be INSTALLED: lua54: 5.4.4 [pfSense] pfSense-Status_Monitoring-php82: 1.8_3 [pfSense] php82: 8.2.4 [pfSense] php82-bcmath: 8.2.4 [pfSense] php82-bz2: 8.2.4 [pfSense] php82-ctype: 8.2.4 [pfSense] php82-curl: 8.2.4 [pfSense] php82-dom: 8.2.4 [pfSense] php82-filter: 8.2.4 [pfSense] php82-gettext: 8.2.4 [pfSense] php82-intl: 8.2.4_1 [pfSense] php82-ldap: 8.2.4 [pfSense] php82-libbe: 0.1.4.1 [pfSense] php82-mbstring: 8.2.4 [pfSense] php82-opcache: 8.2.4 [pfSense] php82-openssl_x509_crl: 1.3_2 [pfSense] php82-pcntl: 8.2.4 [pfSense] php82-pdo: 8.2.4 [pfSense] php82-pdo_sqlite: 8.2.4 [pfSense] php82-pear: 1.10.13 [pfSense] php82-pear-Auth_RADIUS: 1.1.0_4 [pfSense] php82-pear-Cache_Lite: 1.8.3,1 [pfSense] php82-pear-Crypt_CHAP: 1.5.0_2 [pfSense] php82-pear-HTTP_Request2: 2.5.1,1 [pfSense] php82-pear-Mail: 1.4.1,1 [pfSense] php82-pear-Net_IPv6: 1.3.0.b4_2 [pfSense] php82-pear-Net_SMTP: 1.10.1 [pfSense] php82-pear-Net_Socket: 1.2.2 [pfSense] php82-pear-Net_URL2: 2.2.1 [pfSense] php82-pear-XML_RPC2: 1.1.5 [pfSense] php82-pecl-mcrypt: 1.0.6 [pfSense] php82-pecl-radius: 1.4.0b1_2 [pfSense] php82-pecl-rrd: 2.0.3 [pfSense] php82-pfSense-module: 0.95 [pfSense] php82-phpseclib: 2.0.17 [pfSense] php82-posix: 8.2.4 [pfSense] php82-readline: 8.2.4 [pfSense] php82-session: 8.2.4 [pfSense] php82-shmop: 8.2.4 [pfSense] php82-simplexml: 8.2.4 [pfSense] php82-sockets: 8.2.4 [pfSense] php82-sqlite3: 8.2.4 [pfSense] php82-sysvmsg: 8.2.4 [pfSense] php82-sysvsem: 8.2.4 [pfSense] php82-sysvshm: 8.2.4 [pfSense] php82-tokenizer: 8.2.4 [pfSense] php82-xml: 8.2.4 [pfSense] php82-xmlreader: 8.2.4 [pfSense] php82-xmlwriter: 8.2.4 [pfSense] php82-zlib: 8.2.4 [pfSense] pkcs11-helper: 1.29.0 [pfSense] Installed packages to be UPGRADED: bind-tools: 9.18.8 -> 9.18.13 [pfSense] ca_root_nss: 3.83 -> 3.89 [pfSense] ccid: 1.5.0 -> 1.5.1 [pfSense] check_reload_status: 0.0.14 -> 0.0.15 [pfSense] curl: 7.85.0 -> 8.0.1 [pfSense] dbus: 1.14.4,1 -> 1.14.6,1 [pfSense] dnsmasq: 2.87,1 -> 2.89_1,1 [pfSense] dpinger: 3.2 -> 3.3 [pfSense] expat: 2.4.9 -> 2.5.0 [pfSense] gettext-runtime: 0.21 -> 0.21.1 [pfSense] glib: 2.74.0,2 -> 2.76.1,2 [pfSense] gnugrep: 3.8 -> 3.10 [pfSense] jpeg-turbo: 2.1.4 -> 2.1.5.1 [pfSense] libdeflate: 1.14 -> 1.18 [pfSense] libedit: 3.1.20210910,1 -> 3.1.20221030,1 [pfSense] libffi: 3.4.3 -> 3.4.4 [pfSense] libgd: 2.3.3_2,1 -> 2.3.3_5,1 [pfSense] libgpg-error: 1.45 -> 1.46 [pfSense] libidn2: 2.3.3_1 -> 2.3.4 [pfSense] libnghttp2: 1.48.0 -> 1.52.0 [pfSense] libpcap: 1.10.1_2 -> 1.10.3 [pfSense] libpsl: 0.21.1_6 -> 0.21.2_2 [pfSense] libssh2: 1.10.0,3 -> 1.10.0_1,3 [pfSense] lighttpd: 1.4.67 -> 1.4.69_1 [pfSense] lua-resty-core: 0.1.23 -> 0.1.24 [pfSense] luajit-openresty: 2.1.20220915 -> 2.1.20230119 [pfSense] mobile-broadband-provider-info: 20220725 -> 20221107 [pfSense] mpd5: 5.9_12 -> 5.9_14 [pfSense] nginx: 1.22.0_9,3 -> 1.22.1_5,3 [pfSense] nss: 3.84 -> 3.89 [pfSense] nut: 2.8.0_13 -> 2.8.0_22 [pfSense] openldap26-client: 2.6.3 -> 2.6.4 [pfSense] opensc: 0.22.0 -> 0.23.0_1 [pfSense] openvpn: 2.6.0_13 -> 2.6.2 [pfSense] pcre: 8.45_2 -> 8.45_3 [pfSense] pcre2: 10.40 -> 10.42 [pfSense] pcsc-lite: 1.9.5,2 -> 1.9.9,2 [pfSense] pfSense: 23.01 -> 23.05 [pfSense] pfSense-base: 23.01 -> 23.05 [pfSense-core] pfSense-boot: 23.01 -> 23.05 [pfSense-core] pfSense-default-config-serial: 23.01 -> 23.05 [pfSense-core] pfSense-kernel-pfSense-3100: 23.01 -> 23.05 [pfSense-core] pfSense-pkg-WireGuard: 0.1.6_5 -> 0.2.0_2 [pfSense] pfSense-pkg-pfBlockerNG-devel: 3.2.0_4 -> 3.2.0_5 [pfSense] pfSense-pkg-suricata: 6.0.10_4 -> 6.0.12 [pfSense] pfSense-rc: 23.01 -> 23.05 [pfSense-core] pfSense-repo: 23.01 -> 23.05 [pfSense] pftop: 0.8 -> 0.8_2 [pfSense] png: 1.6.38 -> 1.6.39 [pfSense] py311-sqlite3: 3.11.1_8 -> 3.11.2_8 [pfSense] py39-libzfs: 1.1.2022081600 -> 1.1.2023020700 [pfSense] py39-yaml: 5.4.1 -> 6.0 [pfSense] python311: 3.11.1_1 -> 3.11.2_2 [pfSense] python39: 3.9.16 -> 3.9.16_2 [pfSense] readline: 8.1.2 -> 8.2.1 [pfSense] rrdtool: 1.8.0_1 -> 1.8.0_2 [pfSense] sqlite3: 3.39.3_1,1 -> 3.41.0_1,1 [pfSense] strongswan: 5.9.8 -> 5.9.10_2 [pfSense] sudo: 1.9.12 -> 1.9.13p3 [pfSense] suricata: 6.0.10_2 -> 6.0.12 [pfSense] tiff: 4.4.0 -> 4.4.0_1 [pfSense] unbound: 1.17.1_2 -> 1.17.1_3 [pfSense] webp: 1.2.4 -> 1.3.0 [pfSense] zstd: 1.5.2_1 -> 1.5.4_1 [pfSense] Number of packages to be installed: 51 Number of packages to be upgraded: 64 The process will require 69 MiB more space. 229 MiB to be downloaded. **** WARNING **** Reboot will be required!! Proceed with upgrade? (y/N) y -
-
@s0m3f00l Glad it worked out! Happy that it fixed at least ONE person, or I should say lead them to the fix for themsevles.
-
-
@Boboki thanks, your method worked for me! With a slight variation: in the last step I just pressed 'upgrade' in the Gui, instead of going back to command prompt.
-
@xirus Awesome, that is good to know as well!
-
B bryanpedini referenced this topic on
