Kernel Panics on Intel Apollo Lake Processors
-
Hello Stephen,
Unfortunately I did not have the time to test yet, I will check if my BIOS has this setting first and if it does I prefer this workaround in order to avoid the issue ones and for all
I will check the bios and if the setting exists I will implement it and test for 1-2 days and come back to you with the results
As far as the dumps are concerned I have both the running config option as well as the ddb output and the msg buffer
I am attaching them to this post
P.S. Below you can find the hardware specs I am running this instance on:
Computer: ZimaBoard 832
Processor: Intel Celeron N3450
RAM: 8GB LPDDR4
Storage: Internal eMMC 32GB
NIC: Dual Gbe Realtek RTL8111H -
Are all the crashes the same?
I see nothing hat looks identical to that in anything we have logged. It does seem very similar to the known issue in Jasper Lake when running vitualised though.
-
Indeed I can confirm that all logs are identical as one of the cores are always in this "acpi_cpu_idle_mwait()" and the second one is trying to issue a wakeup function to the idle core
I can also confirm that the instance is not virtualized, I have edited the above post to include my hardware setup as well
-
Hmm, surprising we haven't seen more reports of that if it affects all Apollo Lake CPUs. I'd guess it doesn't (Edit: looks like only some steppings). We'll await your test results.
-
Indeed, I will perform the tests I mentioned and come back with the results (Edit: I can confirm that my bios did have the "monitor mwait" option which I have now disabled)
-
It panicked a again on a seemingly different issue as you will be able to see from the logs, seemingly "binuptime()" but I can also see that two of the cores are on an "acpi_cpu_c1()" state and if the issue that I am facing is similar to the one mentioned in the article that you shared they also mention issues with cpu C-States so I am wondering if I should disable that as well in the BIOS
I will keep on testing for now without disabling C-States and see how it goes and if it keeps crashing on that state I will disable that as well
-
Yeah, I could imagine any power states being affected.
The closest thing I have to test this with is an N3160 and that is absolutely stable so I'm guessing it's not affected. -
Yeah that is my consensus as well, as I am not that familiar with power states and those types of areas of the kernel could you possibly tell me if you know that information what do I loose if I turn those completely off? Is it just a power consumption matter or will I have issues with temperatures and cpu usage etc?
Thank you in advance
-
@sidegr said in Kernel Panics on Intel Apollo Lake Processors:
Is it just a power consumption matter or will I have issues with temperatures and cpu usage etc?
Depends how good the cooling is.
It will run hotter, probably not by much though. -
Well let's see how it goes without disabling the C States first as the ZimaBoard is a passively cooled SBC and i don't know how well it will take that :P however at the moment it is running at aprox 36 C
-
Check the sysctls for dev.cpu.0. It will show you what the lowest C state available is and what percentage of time the CPU has spent in each state:
[2.7.0-DEVELOPMENT][admin@t70.stevew.lan]/root: sysctl -a | grep cx_ hw.acpi.cpu.cx_lowest: C1 dev.cpu.3.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc dev.cpu.3.cx_usage_counters: 10875352 2826431 46137948 dev.cpu.3.cx_usage: 18.17% 4.72% 77.10% last 229us dev.cpu.3.cx_lowest: C3 dev.cpu.3.cx_supported: C1/1/1 C2/2/500 C3/3/1000 dev.cpu.2.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc dev.cpu.2.cx_usage_counters: 10937005 2854991 46338850 dev.cpu.2.cx_usage: 18.18% 4.74% 77.06% last 13us dev.cpu.2.cx_lowest: C3 dev.cpu.2.cx_supported: C1/1/1 C2/2/500 C3/3/1000 dev.cpu.1.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc dev.cpu.1.cx_usage_counters: 9982605 2917088 45710826 dev.cpu.1.cx_usage: 17.03% 4.97% 77.99% last 16us dev.cpu.1.cx_lowest: C3 dev.cpu.1.cx_supported: C1/1/1 C2/2/500 C3/3/1000 dev.cpu.0.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc dev.cpu.0.cx_usage_counters: 897566084 392 576 dev.cpu.0.cx_usage: 99.99% 0.00% 0.00% last 127us dev.cpu.0.cx_lowest: C3 dev.cpu.0.cx_supported: C1/1/1 C2/2/500 C3/3/1000I've never tried but it looks like you might be able to set the method used there.
-
Well it seems that at least the setting i changed on the BIOS side did indeed take effect as you can see that the method for the states is C1/hlt instead of mwait that you get on your end
hw.acpi.cpu.cx_lowest: C1 dev.cpu.3.cx_method: C1/hlt C2/io C3/io dev.cpu.3.cx_usage_counters: 9348450 0 0 dev.cpu.3.cx_usage: 100.00% 0.00% 0.00% last 93us dev.cpu.3.cx_lowest: C1 dev.cpu.3.cx_supported: C1/1/1 C2/2/50 C3/3/150 dev.cpu.2.cx_method: C1/hlt C2/io C3/io dev.cpu.2.cx_usage_counters: 27785106 0 0 dev.cpu.2.cx_usage: 100.00% 0.00% 0.00% last 491us dev.cpu.2.cx_lowest: C1 dev.cpu.2.cx_supported: C1/1/1 C2/2/50 C3/3/150 dev.cpu.1.cx_method: C1/hlt C2/io C3/io dev.cpu.1.cx_usage_counters: 26451744 0 0 dev.cpu.1.cx_usage: 100.00% 0.00% 0.00% last 236us dev.cpu.1.cx_lowest: C1 dev.cpu.1.cx_supported: C1/1/1 C2/2/50 C3/3/150 dev.cpu.0.cx_method: C1/hlt C2/io C3/io dev.cpu.0.cx_usage_counters: 13222448 0 0 dev.cpu.0.cx_usage: 100.00% 0.00% 0.00% last 12us dev.cpu.0.cx_lowest: C1 dev.cpu.0.cx_supported: C1/1/1 C2/2/50 C3/3/150So from what i can see my cores stay at C1 which is the halt state all the time while sleeping i suppose as it shows 0 time sepent on other states
I do not exactly know what that means in terms of thermals and stuff though as i am not that familiar with the states
-
I have also updated the cpu microcode as suggested on the article regarding the VM issues on Jasper Lake
It experienced a panic twice since yesterday and both times it was stuck it did not even reboot after the crash but again it has to do with the C1 state
-
It has been a little more than 24 hours since i have updated the cpu microcode and i haven't had any crashes yet which never happened before as i used to get 1-2 crashes per day
I will test it for a couple more days like this and then i will try enabling the monitor mwait functionality in bios as well to check if it will work like that
-
@sidegr You got my attention there are a lot of stepping issues with the N5105 and Proxmox virtualizations. Just letting you know that from what I read microcode #24 fixes a lot.
https://forum.proxmox.com/threads/vm-freezes-irregularly.111494/page-33
Thinking about testing 23.05 RC on my N5105 tonight.
PS: to get C3 states I got this implemented.
-
I can confirm that it crashed again even with the updated microcode and the crashes again are consistent this time crashing at sched_pickcpu() almost every single time or on cpu_search_highest() again while the system makes those calls the cores are in acpi_cpu_c1() state so the issue seems to be with cpu states in general
From the data i collected it mostly has to do with when some or most of the cores are in sleep state and the scheduler tries to wake them up to assign some task to them and this is when the panic occurs
I will also try your suggestion to add those flags in my tunables as from what i gathered so far my cores doesn't ever go into C3 they only reach C1 as it is now
-
Enabling the C3 state made the issue way worse that it was before so i guess i will stay with C1 for now although i am getting slightly higher temperatures while only allowing it to reach C1
It seems there is a big issue with the kernel and this generation's processors
Let's hope it will get fixed on the final release of 23.05
-
@sidegr said in Kernel Panics on Intel Apollo Lake Processors:
Let's hope it will get fixed on the final release of 23.05
Perhaps I am wrong with, but could it also be the Intel SpeedStep technology in that case? There were also an interesting thread I was sadly not able to find again
here in the forum, where someone was setting up
in the "tune ables" something based on the
SpeedStep technology and that solved that
problem really good. -
I will try and find the original thread or find something on that on the internet in general, i know for sure that i can disable speed step on my BIOS but if there is another solution i would prefer to not do that
-
I am also wondering if it has anything to do with PowerD that i have enabled and set to Hiadaptive
