Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    NUT Package (2.8.1 and above)

    Scheduled Pinned Locked Moved
    UPS Tools
    38
    265
    96.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • GertjanG
      Gertjan @apremselaar
      last edited by

      @apremselaar said in NUT Package (2.8.1 and above):

      ugen0.1: <Intel XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
      ugen0.1.0: uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>

      bLength = 0x0012
      bDescriptorType = 0x0001
      bcdUSB = 0x0300
      bDeviceClass = 0x0009 <HUB>
      bDeviceSubClass = 0x0000
      bDeviceProtocol = 0x0003
      bMaxPacketSize0 = 0x0009
      idVendor = 0x0000
      idProduct = 0x0000
      bcdDevice = 0x0100
      iManufacturer = 0x0001 <Intel>
      iProduct = 0x0002 <XHCI root HUB>
      iSerialNumber = 0x0000 <no string>
      bNumConfigurations = 0x0001

      That's just the main USB on board concentrator (see this as a USB switch).

      Typically, you would see the connected devices, like mouse, keyboard, and in my case : an UPS :

      [23.09.1-RELEASE][root@pfSense.bhf.tld]/root: usbconfig -v
ugen0.1: <Intel XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.1.0: uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0300
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0003
  bMaxPacketSize0 = 0x0009
  idVendor = 0x0000
  idProduct = 0x0000
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Intel>
  iProduct = 0x0002  <XHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x001f
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0040
    bMaxPower = 0x0000

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0009  <HUB>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0002
        bInterval = 0x00ff
        bRefresh = 0x0000
        bSynchAddress = 0x0000

      Additional Descriptor

      bLength = 0x06
      bDescriptorType = 0x30
      bDescriptorSubType = 0x00
       RAW dump:
       0x00 | 0x06, 0x30, 0x00, 0x00, 0x00, 0x00




ugen0.2: <American Power Conversion Back-UPS XS 700U   FW:924.Z5 .I USB FW:Z5> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (24mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0110
  bDeviceClass = 0x0000  <Probed by interface class>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0008
  idVendor = 0x051d
  idProduct = 0x0002
  bcdDevice = 0x0106
  iManufacturer = 0x0003  <American Power Conversion>
  iProduct = 0x0001  <Back-UPS XS 700U   FW:924.Z5 .I USB FW:Z5 >
  iSerialNumber = 0x0002  <3B1926X61525  >
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0022
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x00e0
    bMaxPower = 0x000c

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0003  <HID device>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

      Additional Descriptor

      bLength = 0x09
      bDescriptorType = 0x21
      bDescriptorSubType = 0x10
       RAW dump:
       0x00 | 0x09, 0x21, 0x10, 0x01, 0x21, 0x01, 0x22, 0x05,
       0x08 | 0x04

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0006
        bInterval = 0x000a
        bRefresh = 0x0000
        bSynchAddress = 0x0000

      I tend to say : on a low level, USB didn't notice that there was a device (your UPS) connected.
      NUT wouldn't see t neither then ...

      No "help me" PM's please. Use the forum, the community will thank you.
      Edit : and where are the logs ??

      1 Reply Last reply Reply Quote 0
      • dennypageD
        dennypage @apremselaar
        last edited by

        @apremselaar said in NUT Package (2.8.1 and above):

        Smart500RT1U

        I assume that this is one of the older non HID units that require tripplite_usb rather than usbhid-ups.

        Can you show the logs from your test please?

        grep tripplite_usb /var/log/system.log

        Thanks

        A 1 Reply Last reply Reply Quote 0
        • dennypageD
          dennypage @incith
          last edited by

          @incith Can you show the logs from the driver for your failed attempt to use the current version? Thanks.

          1 Reply Last reply Reply Quote 0
          • A
            apremselaar @dennypage
            last edited by

            @dennypage here is the output of grep tripplite_usb /var/log/system.log*:

            /var/log/system.log:Feb 19 08:56:06 pfs upsd[10877]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.1:Feb 14 11:12:30 pfs upsd[13538]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.1:Feb 14 11:18:48 pfs upsd[69465]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.1:Feb 15 16:52:52 pfs upsd[71312]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.1:Feb 15 16:53:06 pfs upsd[87990]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.2:Feb 14 10:53:40 pfs upsd[47040]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.2:Feb 14 10:56:29 pfs upsd[41261]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.2:Feb 14 11:06:41 pfs upsd[45559]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:17:19 pfs tripplite_usb[79064]: Signal 15: exiting
/var/log/system.log.3:Feb 13 10:17:52 pfs upsd[13641]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:17:55 pfs upsd[30664]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:19:04 pfs upsd[84876]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:20:38 pfs upsd[48093]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:21:59 pfs upsd[38797]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:22:02 pfs upsd[50219]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:22:07 pfs upsd[79386]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:25:23 pfs upsd[75920]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:30:24 pfs upsd[76037]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:35:25 pfs upsd[76037]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 10:40:26 pfs upsd[76037]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 14:51:33 pfs upsd[18479]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 14:53:28 pfs upsd[50130]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 14:57:43 pfs upsd[81124]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 14:59:23 pfs upsd[1010]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory
/var/log/system.log.3:Feb 13 15:08:40 pfs upsd[13672]: Can't connect to UPS [RackTripp] (tripplite_usb-RackTripp): No such file or directory

            Thanks

            dennypageD 1 Reply Last reply Reply Quote 0
            • dennypageD
              dennypage @apremselaar
              last edited by

              @apremselaar said in NUT Package (2.8.1 and above):

              /var/log/system.log.3:Feb 13 10:17:19 pfs tripplite_usb[79064]: Signal 15: exiting

              Unfortunately the only log entry from the tripplite_usb process is an exit signal.

              It's more complicated, but would you try the following?

              First, this insures that the nut service is running:

              /usr/local/etc/rc.d/nut.sh restart

              This kills any driver that may be running:

              killall tripplite_usb

              This starts the tripplite_usb driver in debug mode:

              /usr/local/libexec/nut/tripplite_usb -D -a RackTripp

              The driver will output debug information in the shell. Let it run for a few seconds, then you can kill it. Please post the output. Thanks.

              A 1 Reply Last reply Reply Quote 0
              • A
                apremselaar @dennypage
                last edited by

                @dennypage Thanks for all of your assistance with this issue. Here is the output you requested:

                [23.09.1-RELEASE][root@pfs.internal]/root: /usr/local/libexec/nut/tripplite_usb -D -a RackTripp
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.35 (2.8.1.1)
Warning: This is an experimental driver.
Some features may not function correctly.

   0.000000	[D1] testval_reloadable: setting 'user' exists and differs: new value 'root' vs. 'nut'
   0.000018	[D1] Overriding previously specified user 'nut' with 'root' specified in global section
   0.000047	[D1] Network UPS Tools version 2.8.1.1 (release/snapshot of 2.8.1.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --without-nut_monitor --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --without-freeipmi --without-ipmi --with-doc=no --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0
   0.000061	[D1] debug level is '1'
   0.000492	[D1] Succeeded to become_user(root): now UID=0 GID=0
   0.000830	[D1] nut_libusb_open: invalid libusb bus number 0
   0.049407	libusb1: Could not open any HID devices: insufficient permissions on everything
   0.049435	No matching USB/HID UPS found
   0.049457	upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it
[23.09.1-RELEASE][root@pfs.internal]/root:

                and in case it's helpful, my ups.conf:

                [23.09.1-RELEASE][root@pfs.internal]/root: cat /usr/local/etc/nut/ups.conf
user=root

[RackTripp]
driver=tripplite_usb
port=auto
                dennypageD 1 Reply Last reply Reply Quote 0
                • dennypageD
                  dennypage @apremselaar
                  last edited by

                  @apremselaar Thank you. While I research, would you repeat the test without "user=root" please?

                  A 1 Reply Last reply Reply Quote 0
                  • A
                    apremselaar @dennypage
                    last edited by

                    @dennypage Here is the output with "user=root" removed:

                    [23.09.1-RELEASE][root@pfs.internal]/root: /usr/local/libexec/nut/tripplite_usb -D -a RackTripp
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.35 (2.8.1.1)
Warning: This is an experimental driver.
Some features may not function correctly.

   0.000000	[D1] Network UPS Tools version 2.8.1.1 (release/snapshot of 2.8.1.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --without-nut_monitor --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --without-freeipmi --without-ipmi --with-doc=no --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0
   0.000055	[D1] debug level is '1'
   0.000556	[D1] Succeeded to become_user(nut): now UID=316 GID=316
   0.048106	libusb1: Could not open any HID devices: insufficient permissions on everything
   0.048125	No matching USB/HID UPS found
   0.048153	upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it
[23.09.1-RELEASE][root@pfs.internal]/root:
                    dennypageD 2 Replies Last reply Reply Quote 0
                    • dennypageD
                      dennypage @apremselaar
                      last edited by

                      @apremselaar Sorry for putting you through so many steps. It's hard when you don't have the same gear.

                      Would you mind repeating the test with the attached driver please? You will need to unzip the file. The checksum of the unzipped file is 36207.

                      Thanks

                      tripplite_usb.zip

                      A 1 Reply Last reply Reply Quote 0
                      • dennypageD
                        dennypage @apremselaar
                        last edited by

                        @apremselaar Also, attached is the release version of NUT 2.8.1 built from the release source rather than from the dev source. The checksum of the unzipped file is 28662.

                        tripplite_usb-2.8.1.zip

                        A 1 Reply Last reply Reply Quote 0
                        • A
                          apremselaar @dennypage
                          last edited by

                          @dennypage here is the debug output from this app:

                          [23.09.1-RELEASE][root@pfs.internal]/home/alan: ./tripplite_usb -D -a RackTripp
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.35 (2.8.1.1)
Warning: This is an experimental driver.
Some features may not function correctly.

   0.000000	[D1] Using USB implementation: libusb-1.0.0 (API: 0x1000102)
   0.000102	[D1] testval_reloadable: setting 'user' exists and differs: new value 'root' vs. 'nut'
   0.000113	[D1] Overriding previously specified user 'nut' with 'root' specified in global section
   0.000141	[D1] Network UPS Tools version 2.8.1.1 (release/snapshot of 2.8.1.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.9 --without-python2 --with-python3=/usr/local/bin/python3.9 --without-nut_monitor --with-ltdl --with-nut-scanner --without-avahi --without-cgi --without-dev --without-freeipmi --with-ipmi --with-doc=no --without-modbus --without-neon --without-nss --with-openssl --without-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/share/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0
   0.000155	[D1] debug level is '1'
   0.000588	[D1] Succeeded to become_user(root): now UID=0 GID=0
   0.000925	[D1] nut_libusb_open: invalid libusb bus number 0
   0.049046	libusb1: Could not open any HID devices: insufficient permissions on everything
   0.049060	No matching USB/HID UPS found
   0.049087	upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it
                          A 1 Reply Last reply Reply Quote 0
                          • A
                            apremselaar @dennypage
                            last edited by

                            @dennypage here is the debug output from this version:
                            (I had to put it in a different directory and rename it to tripplite_usb or it complained about a config mismatch)

                            [23.09.1-RELEASE][root@pfs.internal]/home/alan/2.8.1: ./tripplite_usb -D -a RackTripp
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.35 (2.8.1)
Warning: This is an experimental driver.
Some features may not function correctly.

   0.000000	[D1] testval_reloadable: setting 'user' exists and differs: new value 'root' vs. 'nut'
   0.000017	[D1] Overriding previously specified user 'nut' with 'root' specified in global section
   0.000047	[D1] Network UPS Tools version 2.8.1 (release/snapshot of 2.8.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.9 --without-python2 --with-python3=/usr/local/bin/python3.9 --without-nut_monitor --with-ltdl --with-nut-scanner --without-avahi --without-cgi --without-dev --without-freeipmi --without-ipmi --with-doc=no --without-modbus --without-neon --without-nss --with-openssl --without-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/share/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0
   0.000070	[D1] debug level is '1'
   0.000636	[D1] Succeeded to become_user(root): now UID=0 GID=0
   0.001015	[D1] nut_libusb_open: invalid libusb bus number 0
   0.051327	libusb1: Could not open any HID devices: insufficient permissions on everything
   0.051346	No matching USB/HID UPS found
   0.051374	upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it
                            1 Reply Last reply Reply Quote 0
                            • A
                              apremselaar @apremselaar
                              last edited by

                              @dennypage Also, just to clarify, it was all working for me without issues with the packaged version 2.8.2, it only broke once I installed 2.8.2_1

                              M dennypageD 2 Replies Last reply Reply Quote 0
                              • M
                                mcury @apremselaar
                                last edited by

                                @apremselaar said in NUT Package (2.8.1 and above):

                                @dennypage Also, just to clarify, it was all working for me without issues with the packaged version 2.8.2, it only broke once I installed 2.8.2_1

                                Perhaps a dump question, but did you reboot after installing nut ?
                                In my case, I was getting this permission denied issue and after a reboot, nut is working.

                                A 1 Reply Last reply Reply Quote 0
                                • A
                                  apremselaar @mcury
                                  last edited by

                                  @mcury yes, I've tried rebooting as well as unplugging and replugging in the USB connection to the UPS

                                  1 Reply Last reply Reply Quote 1
                                  • dennypageD
                                    dennypage @apremselaar
                                    last edited by dennypage

                                    @apremselaar said in NUT Package (2.8.1 and above):

                                    Also, just to clarify, it was all working for me without issues with the packaged version 2.8.2, it only broke once I installed 2.8.2_1

                                    This is puzzling.

                                    The dependency that was used in pfSense-pkg-nut-2.8.2, was nut-devel-2023.10.07. For reference, the dependency used in pfSense-pkg-nut-2.8.2_1 is nut-devel-2024.01.03.

                                    I would have expected the file I posted above, "tripplite_usb-2.8.1.zip", to work as that version is from the actual 2.8.1 release and should be almost identical to the version in nut-devel-2023.10.07.

                                    I pulled the tripplite_usb executable from nut-devel-2023.10.07 and have attached it here. Can you please reconfirm that it works with the same test? Thanks!

                                    tripplite_usb-from-nut-devel-2023.10.07_1.zip

                                    A 1 Reply Last reply Reply Quote 0
                                    • A
                                      apremselaar @dennypage
                                      last edited by

                                      @dennypage Sorry, I'm not seeing the attachment.

                                      Is it possible that when I did the package update it (I assume) also updated the nut-devel package and perhaps the executable is linking to something in the dependency dynamically? or is the tripplite_usb part of the nut-devel package?

                                      Thanks!

                                      A dennypageD 2 Replies Last reply Reply Quote 0
                                      • A
                                        apremselaar @apremselaar
                                        last edited by

                                        @dennypage sorry, it appears that for some reason the link to the attachment was delayed in its display. I've got it now and have downloaded it. will try it in a moment

                                        1 Reply Last reply Reply Quote 0
                                        • dennypageD
                                          dennypage @apremselaar
                                          last edited by

                                          @apremselaar said in NUT Package (2.8.1 and above):

                                          Sorry, I'm not seeing the attachment.

                                          Well, isn't that embarrassing! My bad. I just edited the post to add the attachment.

                                          Is it possible that when I did the package update it (I assume) also updated the nut-devel package and perhaps the executable is linking to something in the dependency dynamically? or is the tripplite_usb part of the nut-devel package?

                                          NUT itself, including all executables, comes from the dependency which is currently nut-devel-2024.01.03. The pfSense package, pfSense-pkg-nut, only has the bits required to integrate with pfSense (mostly php). The pfSense package states a dependency on the specific version of the nut package that it wants.

                                          A 1 Reply Last reply Reply Quote 1
                                          • A
                                            apremselaar @dennypage
                                            last edited by

                                            @dennypage Yeah, this seems to work. I let it sit for about 30 seconds before hitting ^C to exit. here's the output:

                                            [23.09.1-RELEASE][root@pfs.internal]/home/alan/2023.10.07: ./tripplite_usb -D -a RackTripp
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.34 (2.8.0.1)
Warning: This is an experimental driver.
Some features may not function correctly.

   0.000000	[D1] testval_reloadable: setting 'user' exists and differs: new value 'root' vs. 'nut'
   0.000018	[D1] Overriding previously specified user 'nut' with 'root' specified in global section
   0.000048	[D1] Network UPS Tools version 2.8.0.1 (release/snapshot of 2.8.0.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --with-freeipmi --without-ipmi --with-doc=no --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0
   0.000064	[D1] debug level is '1'
   0.000501	[D1] Succeeded to become_user(root): now UID=0 GID=0
   0.000841	[D1] nut_libusb_open: invalid libusb bus number 0
   0.000860	[D1] nut_libusb_open: invalid libusb bus number 0
   0.000927	[D1] nut_libusb_open: invalid libusb bus number 0
   0.006914	Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U
   0.058424	Using binary SMART protocol (3005)
   0.418455	Unit ID: 65535
Attached to Tripp Lite TRIPP LITE SMART500RT1U
   0.946800	[D1] Group and/or user account for this driver was customized ('root:nut') compared to built-in defaults. Fixing socket '/var/db/nut/tripplite_usb-RackTripp' ownership/access.
   0.946853	[D1] Group access for this driver successfully fixed
   0.946875	Running as foreground process, not saving a PID file
   0.946893	[D1] Driver initialization completed, beginning regular infinite loop
   0.946898	upsnotify: failed to notify about state 2: no notification tech defined, will not spam more about it
^C  41.192535	[D1] set_exit_flag: raising exit flag due to signal 2
  41.192563	Signal 2: exiting
[23.09.1-RELEASE][root@pfs.internal]/home/alan/2023.10.07:
                                            dennypageD 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post